Lifesafety Power FPO75-D8PE1 Auxiliary Power Supply
Overview
The FPO75-D8PE1 is a 75W Class 2 auxiliary power supply designed to feed multiple low-voltage devices from a single source. It provides 8 independent Class 2 limited-power outputs, each rated at 2.5A maximum, and delivers a total capacity of either 6A at 12V or 3A at 24V. This topology is typical for security control systems, access panels, and integrated fire/life safety installations where you need to power multiple auxiliary circuits (door readers, relay modules, indicator lights, alarms, sensors) without overloading a single distribution point.
Compatibility
This unit interfaces with standard Class 2 circuit architectures common in fire alarm systems, access control platforms, and integrated life-safety controllers. The 8 auxiliary outputs allow you to distribute 12VDC or 24VDC independently to multiple end devices, provided each load does not exceed 2.5A per terminal. The E1 enclosure rating provides basic environmental protection suitable for indoor control room, closet, or equipment cabinet installations. Consult your system integrator to confirm voltage requirements (12V vs. 24V operation) and total amperage draw across all eight ports does not exceed the power budget (6A/12V or 3A/24V).
Installation Notes
Each of the 8 outputs is independently fused or limited to 2.5A to prevent cascade failures if a single load shorts or draws excessive current. Verify your supply voltage (12V or 24V) matches the end-device requirements before connecting. The Class 2 designation means the supply is inherently limited in fault current and voltage, making it safe for direct wiring to low-voltage security and life-safety circuits without additional isolation barriers in most jurisdictions. Confirm local electrical codes and system design documentation before installation.
