Lifesafety Power FPO75-B100C4PD8PE1 75W DVPS 4-Lock Control Power Supply

Overview

The FPO75-B100C4PD8PE1 is a 75W distributed power supply built for door access control installations where you need simultaneous lock control across four doors plus auxiliary outputs for signage, strobes, or sensor circuits. Class 2 power-limited output at 2.5A per lock circuit and 2A/12V or 2A/24V auxiliary lines keeps wiring safe without conduit in most jurisdictions — a real advantage when running cable through walls or across commercial spaces without extra installation cost.

Compatibility

This DVPS integrates with multigang lock control wiring — works with any 12V or 24V solenoid lock, mag lock, or electric strike that draws within the 2.5A per-lock limit. The four dedicated lock outputs and eight auxiliary outputs mean you can power door readers, request-to-exit buttons, door status switches, and visual/audio alert devices from a single mounted unit. Suits standard commercial access control panels and standalone door controllers that require distributed backup power.

Installation Notes

E1 enclosure rating provides basic protection in non-hazardous indoor spaces — typical server closets, utility rooms, or panel-mount locations. The 75W total capacity divides across four lock lines (each up to 2.5A max) and auxiliary circuits (2A/12V or 2A/24V nominal) — verify your lock solenoid draw and accessories won't exceed per-circuit limits before commissioning. UL Class 2 power-limited design eliminates the need for fire-rated conduit or heavy gauge backup wiring in most codes; check local authority requirements before final sign-off.