Lifesafety Power · FPO75-B100C4E1M

Lifesafety Power FPO75-B100C4E1M Power supply board 75W 6A/12V

75W redundant power supply with dual independent outputs—2A @ 12VDC and 2A @ 24VDC—designed to power access control systems, door locks, and

• Dual independent outputs (12VDC @ 2A and 24VDC @ 2A) support mixed-voltage installations.
• Four individually fused lock outputs isolate circuit faults without tripping the entire supply.
• E1M enclosure (14H×12W×4.5D in.) fits standard wall-mount or rack-install security closets.

Lifesafety Power · FPO75-B100C4E2M

Lifesafety Power FPO75-B100C4E2M Power supply board 75W 6A/12V

Dual-output power supply board engineered for access control and integrated security systems

• Dual-output design powers 12V/24V primary and adjustable 5–18V secondary from one 75W board.
• Four isolated 3A relay outputs switch locks independently, protecting video and data circuits.
• Size 18 enclosure with Mercury/Lenel backplate fits existing cabinet stacks without rewiring.

Lifesafety Power · FPO75-B100C4E2V

Lifesafety Power FPO75-B100C4E2V Power supply board 75W 6A/12V

75W power supply engineered for Vertx 4DR networked lock systems and associated access-control hardware

• 75W dual-output power supply for Vertx 4DR networked locks
• Simultaneous 12VDC and 24VDC output at 2A each
• 8 fused lock/auxiliary outputs in stainless E2V enclosure

Lifesafety Power · FPO75-B100C4PD8PE4H

Lifesafety Power FPO75-B100C4PD8PE4H Power supply board 75W 6A/1

75W secondary power supply board designed for access control and security subsystems requiring distributed 12VDC or 24VDC power

• Selectable 12VDC/6A or 24VDC/3A output supports mixed lock and reader loads from one board.
• 12 supervised class 2 outputs (4 relay lock + 8 auxiliary) eliminate external relay modules.
• Pre-installed in 20×24×4.5" Size 24 enclosure with Honeywell Pro-Watch backplate for direct mount.

Lifesafety Power · FPO75-B100C4PD8PE4M/T4-A

Lifesafety Power FPO75-B100C4PD8PE4M/T4-A Mercury ProWire Power

Compact UL-listed power distribution system designed for access control installations requiring dual-voltage output, failsafe/failsecure lock

• Dual 12V/24V DC output from a single 120V AC input eliminates separate transformers.
• 4 relay lock outputs are individually configurable failsafe or failsecure per door.
• Built-in fire alarm disconnect auto-unlocks doors via Form C contacts—no external relay.

Lifesafety Power · FPO75-B100C4PE1

Lifesafety Power FPO75-B100C4PE1 75W power supply 6A/12V or 3A/2

75W field-mounted power supply designed to centralize 12VDC and 24VDC distribution for access control, locking hardware, and perimeter security

• Dual primary outputs (12VDC/6A or 24VDC/3A) consolidate mixed-voltage lock distribution.
• Four 2.5A relay outputs independently selectable fail-safe or fail-secure per channel.
• Adjustable 5–18VDC secondary powers legacy sensors without added regulators or converters.

Lifesafety Power · FPO75-B100C4PE2M

Lifesafety Power FPO75-B100C4PE2M Power supply board 75W 6A/12V

Secondary power supply designed to support door access control, lock interfaces, and low-power IP endpoints in hardened security installations

• Dual-voltage primary rail (12VDC/6A or 24VDC/3A) supports mixed lock and reader hardware.
• Four class-2 relay outputs at 2.5A each switch strikes and mag locks without add-on modules.
• Adjustable 5–18V secondary rail at 4A powers IP cameras and networked readers independently.

Lifesafety Power · FPO75-B100C4W1M

Lifesafety Power FPO75-B100C4W1M 75W power supply 6A/12V or 3A/2

75W unregulated power supply with integrated 4-channel relay control for electric lock and access management systems

• Delivers 6A@12VDC or 3A@24VDC from a single enclosed board for mid-scale door access.
• Four independently fused 3A relay channels eliminate external relay modules in most installs.
• Per-output fail-safe or fail-secure selection supports mixed lock configurations on one board.

Lifesafety Power · FPO75-B100C8D8E4M

Lifesafety Power FPO75-B100C8D8E4M 75W power supply 6A/12V or 3A

75W Class 2 power-limited supply designed to feed access control and life safety systems that require discrete relay and DC auxiliary outputs

• Eight fused relay outputs (3A each, FAI/failsafe/failsecure) eliminate external relay banks.
• Dual primary voltage—12V@6A or 24V@3A—plus adjustable 5–18V@4A secondary cuts BOM complexity.
• Class 2 NEC/UL-listed design meets power-limited requirements for life safety and access control.

Lifesafety Power · FPO75-B100C8D8E4M1

Lifesafety Power FPO75-B100C8D8E4M1 75W power supply 6A/12V or 3

75W industrial power supply engineered for access control and security integration environments where dual-voltage output, relay switching, and

• Dual primary output (12VDC/6A or 24VDC/3A) powers mixed-voltage access devices from one supply.
• 8 relay lock outputs, each fused at 3A and individually configurable failsafe, failsecure, or FAI.
• 16 total supervised outputs fit E4 enclosure (24×20×4.5 in) with Mercury back plate included.

Lifesafety Power · FPO75-B100C8D8PE4M

Lifesafety Power FPO75-B100C8D8PE4M 75W power supply 6A/12V or 3

75W dual-output power supply engineered for access control and perimeter security integration where relay-driven lock control and auxiliary equipment

• Selectable 12VDC/24VDC primary output eliminates separate modules in mixed-voltage installs.
• 8 relay outputs—individually fused at 3A—support failsafe, failsecure, or FAI programming.
• 8 class 2 auxiliary DC outputs (2.5A each) power REX buttons, sirens, and ancillary devices.

Lifesafety Power · FPO75-B100C8D8PE4M1

Lifesafety Power FPO75-B100C8D8PE4M1 Mercury Unified Pow FPO75-B1

UL-listed access control power distribution system designed for multi-door installations requiring synchronized failsafe/failsecure lock control

• 8 individually fused 3A relay outputs support failsafe or failsecure lock control per door.
• 8 auxiliary Class 2 outputs at 2.5A each power readers, REX devices, and sensors per zone.
• Integrated fire alarm disconnect automatically unlocks doors on FA trigger for code compliance.

Lifesafety Power · FPO75-B100C8PD8PE4M

Lifesafety Power FPO75-B100C8PD8PE4M PSB 75W 6A/12V or 3A/24V 2n

75W power supply board (PSB) designed for distributed access control and electronic lock powering in multi-door installations

• Dual 12V/6A and 24V/3A outputs power EM locks and solenoid strikes from one board.
• 8 Class 2 relay outputs at 2.5A each drive electromechanical locks without external relays.
• Adjustable 5–18V/4A secondary channel supports legacy readers and sensors on a single supply.

Lifesafety Power · FPO75-B100C8PE1

Lifesafety Power FPO75-B100C8PE1 75W power supply 6A/12V or 3A/2

75W regulated power supply designed for access control and door lock circuits in security installations

• Eight independent 2.5A relay outputs eliminate external relay modules in multi-door installs.
• Dual primary voltage (12VDC/6A or 24VDC/3A) supports mixed lock ecosystems from one supply.
• Adjustable 5–18V secondary output powers readers or sensors without tapping main lock circuits.

Lifesafety Power · FPO75-B100C8PE2H

Lifesafety Power FPO75-B100C8PE2H 75W power supply 6A/12V or 3A

75W managed power supply engineered for door access and lock control integration in security installations

• Delivers 75W at 12VDC/6A or 24VDC/3A to support EM locks and strike plates.
• Eight independent relay outputs (2.5A each) allow per-door failsafe or failsecure config.
• Class 2 power-limited relay outputs simplify NEC compliance in access control installs.

Lifesafety Power · FPO75-B100C8PE4H

Lifesafety Power FPO75-B100C8PE4H 75W power supply 6A/12V or 3A

75W switching power supply with eight independently configurable relay-control outputs designed for distributed access-control and security

• Eight relay outputs each rated 2.5A with selectable fail-safe, fail-secure, or fail-as-is logic.
• Single unit powers mixed-voltage loads: 6A@12VDC, 3A@24VDC, and 4A adjustable 5–18VDC.
• Bussed cable architecture in the E4 enclosure reduces field-wiring labor across multi-cabinet runs.

Lifesafety Power · FPO75-B100C8PE4H/T4-C

Lifesafety Power FPO75-B100C8PE4H/T4-C 75W power supply 6A/12V

75W managed power supply designed to feed and supervise door locks, magnetic strikers, and access control solenoids across multiple entry points in

• Eight 2.5A relay outputs cover 4–8 doors from a single 75W supply.
• Field-select 12VDC or 24VDC per site; 24V cuts conductor gauge on long runs.
• Per-channel short-circuit and power-loss supervision isolates faults without taking down adjacent doors.

Lifesafety Power · FPO75-B100D8E1

Lifesafety Power FPO75-B100D8E1 FPO75-B100D8E1

75W regulated power supply board engineered for cabinet-mount installations serving access control panels, door hardware, and distributed

• 75W regulated output supports multi-door access control and auxiliary camera loads.
• Dual-rail design delivers 6A at 12V or 3A at 24V, eliminating separate supply runs.
• Modular board slots directly into Lifesafety Power cabinets, reducing install labor and BOM.

Lifesafety Power · FPO75-B100D8E1M

Lifesafety Power FPO75-B100D8E1M 75W power supply 6A/12V or 3A/2

75W DC power supply with eight independent, fused auxiliary outputs

• Eight independent 3A fused outputs let you isolate zones without a separate distribution board.
• Dual-bus selection per output supports multi-system deployments from a single cabinet unit.
• Class 2 power-limited design simplifies NEC compliance for low-voltage fire and access installs.

Lifesafety Power · FPO75-B100D8E2M

Lifesafety Power FPO75-B100D8E2M Mercury Unified Unified Power Sy

Compact 75W unified power system designed for access control, emergency egress, and perimeter security installations requiring redundant battery

• 75W dual 12V/24V output supports mixed-voltage lock and reader ecosystems in one unit.
• 8 fused 3A auxiliary outputs with LED status indicators simplify load isolation and fault diagnosis.
• Integrated fire alarm relay auto-unlocks egress doors on alarm signal—no external relay board needed.

Lifesafety Power · FPO75-B100D8M8NLCE2M

Lifesafety Power FPO75-B100D8M8NLCE2M 75W power supply 6A/12V

75W managed distribution power supply designed for security installations requiring regulated, independently fused power delivery across multiple

• Eight individually fused 3A DC outputs prevent a single device fault from taking down other loads.
• Dual-bus architecture lets you isolate zones across Bus1 and Bus2 without external switching hardware.
• Configurable 12VDC @ 6A or 24VDC @ 3A output supports mixed IP camera and access control loads.

Lifesafety Power · FPO75-B100D8PE1M

Lifesafety Power FPO75-B100D8PE1M 75W Dual Voltage 120 VAC 8 Aux

75W switched-mode power supply rated for 120 VAC input, designed to distribute power across up to eight auxiliary outputs in surveillance and access

• 75W switched-mode supply powers up to eight aux outputs from a single 120 VAC feed.
• Dual voltage input eliminates step-down transformers in mixed-voltage cabinet installs.
• Centralized distribution consolidates cameras, locks, and readers without per-device supplies.

Lifesafety Power · FPO75-B100D8PE4M

Lifesafety Power FPO75-B100D8PE4M Mercury Unified Unified Power

UL-listed unified power supply designed for integrated access control and life-safety installations

• 75W FlexPower module with 8 x 2.5A Class 2 outputs supports multi-door deployments.
• Dual 12V/24V rails let you mix legacy locks and modern 24V readers on one supply.
• Built-in fire alarm disconnect relay eliminates the need for a separate relay module.

Lifesafety Power · FPO75-B100E2M

Lifesafety Power FPO75-B100E2M Mercury Unified Unified Power Sys

Compact unified power supply designed for integrated access control and emergency egress systems

• Delivers 12V and 24V DC simultaneously from a single 120V AC input.
• Hardwired fire alarm relay unlocks doors without networked logic dependencies.
• Built-in battery charger with low-cutoff protection extends battery service life.

Lifesafety Power · FPO75-B100E4M1

Lifesafety Power FPO75-B100E4M1 DC Power Supply Economical Dual

75-watt, dual-voltage economical power supply engineered for distributed surveillance and access control infrastructure

• Dual primary outputs (12VDC/6A or 24VDC/3A) power mixed-voltage camera and lock zones.
• Adjustable 5–18VDC secondary output at 4A supports auxiliary relays and control modules.
• 20″×4.5″×24″ rackmount enclosure fits standard 19-inch racks and wall-mount installations.

Lifesafety Power · FPO75-B100M8NLCE2M

Lifesafety Power FPO75-B100M8NLCE2M 75W power supply 6A/12V or 3

75W managed distribution power supply delivering either 6A at 12V or 3A at 24V — your choice depends on the voltage your security devices require

• Eight independently fused 3A outputs isolate faults to a single device or branch.
• Selectable 12V/6A or 24V/3A output supports cameras, readers, strikes, and maglocks.
• 75W managed distribution eliminates daisy-chained wall supplies across multi-device runs.

Lifesafety Power · FPO75-B100M8NLCE2S

Lifesafety Power FPO75-B100M8NLCE2S 75W power supply 6A/12V or 3

75-watt managed power supply with eight independently fused distribution outputs, each rated at 3A

• Eight independently fused 3A outputs isolate faults to a single branch, preventing cascade failures.
• Supports 12VDC @ 6A or 24VDC @ 3A output — one module covers mixed-voltage endpoint environments.
• DIN-rail/card-cage form factor integrates directly into Lifesafety Power cabinet and modular rack systems.

Lifesafety Power · FPO75-B100M8NLCE4M/P4-A

Lifesafety Power FPO75-B100M8NLCE4M/P4-A 75W PS 6A/12V or 3A/24V

75W managed power distribution module engineered for access control, surveillance, and life safety infrastructure requiring monitored, fused DC

• Delivers 6A@12V or 3A@24V selectable output across 8 independently fused 3A circuits.
• Per-circuit fault isolation keeps remaining 7 outputs live during a short-circuit event.
• Cable-based FPO modular design integrates directly with NLC and B100 modules—no breakout hardware needed.

Lifesafety Power · FPO75-B100M8PNLCE2M

Lifesafety Power FPO75-B100M8PNLCE2M 75W power supply 6A/12V

75-watt managed power supply with an integrated 8-output distribution panel rated at 2.5A per channel

• 8 independent 2.5A-limited channels protect each camera circuit from single-point faults.
• Supports 12VDC at 6A or 24VDC at 3A to match existing on-site infrastructure voltage.
• Managed distribution eliminates per-line fuses, reducing junction-box complexity in the field.

Lifesafety Power · FPO75-B100M8PNLCE4M/T4-A

Lifesafety Power FPO75-B100M8PNLCE4M/T4-A 75W power supply 6A/12

75W managed power distribution module built for multi-camera surveillance installations where you need regulated output to multiple devices from a

• Delivers 75W with 6A at 12V or 3A at 24V to support multi-device DC loads.
• 8-outlet distribution block caps each branch at 2.5A, preventing individual overloads.
• Class 2 power-limited outputs allow lighter 18–20 AWG wiring on runs under 100 ft.

Lifesafety Power · FPO75-BOXED

Lifesafety Power FPO75-BOXED Power Supply 120V Input 6A/12V

Compact regulated power supply designed for distributed security infrastructure where a single 120VAC source must feed mid-range DC loads

• Selectable 12VDC/24VDC output lets you match device voltage at order time.
• Delivers 75W continuous power — enough for 4–6 IP cameras or multiple readers.
• Standard 120VAC/60Hz input installs on any North American circuit, no conditioning needed.

Lifesafety Power · FPO75-C4D8E1

Lifesafety Power FPO75-C4D8E1 75W Svps 4 Lock Control Out; 8AUX

75-watt supervised power supply designed for access control systems and integrated security installations requiring simultaneous lock control and

• 75W SVPS capacity drives 4 lock outputs and 8 aux channels from a single unit.
• Supervised design includes backup power and tamper monitoring for fault reporting.
• E1 cabinet-rated; 12V DC aux feeds readers, relays, and sensors across multi-door sites.

Lifesafety Power · FPO75-C4D8E1PDK

Lifesafety Power FPO75-C4D8E1PDK 75W PS 6A/12V or 3A/24V 4 relay

75W regulated power supply engineered for multi-door access control systems where lock control flexibility and distributed auxiliary power are

• Selectable 6A/12V or 3A/24V output matches site voltage standard without rewiring.
• Four independent relays support mixed failsafe, failsecure, or FAI lock types per door.
• Eight fused auxiliary DC outputs eliminate a separate supply for readers and REX devices.

Lifesafety Power · FPO75-C4D8E2

Lifesafety Power FPO75-C4D8E2 : Power supply board 75W 6A/12V

• Four independent channels each supply 12VDC or 24VDC, supporting mixed-voltage door hardware.
• 75W total capacity handles up to four electromagnetic locks and readers from one board.
• Fits 19-inch rack or wall enclosures at 20H × 16W × 4.5D in., simplifying centralized deployment.

Lifesafety Power · FPO75-C4D8E2M

Lifesafety Power FPO75-C4D8E2M Power supply board 75W 6A/12Vor 3

75-watt regulated power supply board designed to support networked security equipment and access control systems

• Selectable 12VDC/6A or 24VDC/3A output supports legacy and modern endpoints.
• Four onboard relay outputs eliminate external relay modules in lock and alarm circuits.
• 75W regulated board consolidates auxiliary power for badge readers and solenoid strikes.

Lifesafety Power · FPO75-C4D8E2P

Lifesafety Power FPO75-C4D8E2P 75W power supply 6A/12V or 3A/24V

75-watt regulated power supply designed for access control and life-safety installations

• Delivers 12VDC/6A or 24VDC/3A to power locks, readers, and cameras from one unit.
• Four relay lock outputs support FAI, failsafe, or failsecure modes — each fused at 3A.
• Eight auxiliary DC outputs with Bus1/Bus2 selection eliminate external switching modules.