Lifesafety Power FPO75-B100M8PNLCE4M/T4-A 75W Power Supply
Overview
The FPO75-B100M8PNLCE4M/T4-A is a 75W managed power distribution module built for multi-camera surveillance installations where you need regulated output to multiple devices from a single supply. It delivers either 6A at 12V or 3A at 24V, with an 8-outlet distribution block that limits each output to 2.5A maximum — a hard constraint that prevents overload on individual branches and keeps wiring simpler than running separate supplies to every camera, access reader, or alarm relay in a small-to-medium site.
Compatibility
This supply integrates into standard 24V DC security systems: IP camera installations, access control systems, intercom panels, alarm relays, and door strikes operating in the 12V or 24V DC range. The 8-managed outputs make it practical for consolidating power to clusters of door readers, lens heaters, or auxiliary devices in cabinet-mounted or wall-mounted configurations. It is not designed for PoE injection (that requires a dedicated PoE injector or switch); it is a standalone DC power supply for non-PoE devices.
Installation Notes
Class 2 power-limited output at 2.5A per channel means wiring gauges can remain lighter than full 6A runs — typically 18 AWG or 20 AWG for short runs under 100 feet, reducing conduit clutter. The 8-outlet panel format fits standard electrical enclosures and wall mounts. Ensure load distribution does not exceed 6A total on 12V or 3A total on 24V rail; individual overloads on any single outlet will be limited to 2.5A by the module's protection. Input voltage requirements and thermal dissipation limits should be confirmed against your site's rack or enclosure ventilation.
