Lifesafety Power · FPO150-B1002D8E4P

Lifesafety Power FPO150-B1002D8E4P Power supply board 150W 12A/1

150W power supply board engineered to distribute regulated DC power to networked security endpoints across distributed installations

• Delivers 150W continuous output at 12VDC/12A or 24VDC/6A for mixed-voltage deployments.
• Board-level form factor mounts in protected enclosures, centralizing power distribution.
• Dual-voltage support reduces SKU count when powering 12V and 24V endpoints together.

Lifesafety Power · FPO150-B1002D8E6P

Lifesafety Power FPO150-B1002D8E6P 150W power supply 12A/12V

150-watt regulated power supply engineered to distribute stable DC voltage across security system infrastructure — IP cameras, network switches, and

• 150W regulated output sustains multiple IP cameras or a PoE switch without voltage sag.
• 24V DC regulated rail eliminates nuisance resets and protects sensitive edge network devices.
• Industrial enclosure with PoE connectivity simplifies centralized wiring in distributed camera arrays.

Lifesafety Power · FPO150-B1002D8PE8M2

Lifesafety Power FPO150-B1002D8PE8M2 150W power supply 12A/12V

150W industrial-grade power supply rated 12A/12V or 6A/24V output, designed to feed distributed access control and security systems where multiple

• 150W output (12A/12V or 6A/24V) feeds multi-device access control from one supply.
• Eight independent 2.5A Class 2 outputs prevent single-branch overloads from cascading.
• Per-output Bus1/Bus2 selectivity lets you split loads across isolated circuits at commissioning.

Lifesafety Power · FPO150-B1002D8PM8NLCE6M

Lifesafety Power FPO150-B1002D8PM8NLCE6M 150W Dual Voltage 120

150W power supply rated for 120 VAC input, engineered to distribute power across security systems that demand segregated output channels for locks

• 150W at 120VAC input supports mixed lock and reader loads from one enclosure.
• Dual 12V/24V DC selectable output eliminates the need for a separate voltage converter.
• 8 managed lock outputs keep strike and mag-lock circuits isolated from auxiliary loads.

Lifesafety Power · FPO150-B1002D8PM8NLCE6M/P8-A

Lifesafety Power FPO150-B1002D8PM8NLCE6M/P8-A 150W power supply

150W supervised power supply designed for access control, intrusion, and low-voltage security system integration

• Delivers 12A at 12V or 6A at 24V to drive readers, strikes, and auxiliaries.
• Eight individually fused 3A auxiliary outputs isolate faults without dropping the primary bus.
• Class 2 power-limited (2.5A per auxiliary) satisfies life-safety code supervision requirements.

Lifesafety Power · FPO150-B1002D8PM8NLCE6M/P8-A-RVN

Lifesafety Power FPO150-B1002D8PM8NLCE6M/P8-A-RVN 150W power supp

Redundant 150W power supply designed for distributed access-control and life-safety installations requiring multiple independent power rails

• Dual-bus architecture with 8 individually fused 2.5A aux ports eliminates single-point faults.
• Primary output selectable 12V/12A or 24V/6A at install supports varied door controller loads.
• E6 enclosure with integrated Mercury back plate fits standard cabinets; DIN-rail or wall-mount ready.

Lifesafety Power · FPO150-B1002D8PM8NLCE6M/T8-A

Lifesafety Power FPO150-B1002D8PM8NLCE6M/T8-A 150W power supply

150W distributed power supply designed for access control, alarm, and surveillance system installations where you need Class 2 power-limited

• Delivers 12A at 12V or 6A at 24V to power mid-size door controllers and readers.
• Eight individually fused 3A auxiliary outputs enable per-load fault isolation and zoning.
• Class 2 power-limited 2.5A per channel removes need for external protection on each run.

Lifesafety Power · FPO150-B100C4C82D8E4

Lifesafety Power FPO150-B100C4C82D8E4 Power System combine FlexPo

Compact uninterruptible power supply designed for access control systems, door locks, and auxiliary equipment in small-to-medium deployments

• Dual 12V/24V outputs let legacy and modern locks share one 150W UL-listed system.
• Eight relay lock outputs (3A fused each) support failsafe or failsecure per zone.
• Sixteen auxiliary 3A fused outputs power sensors and REX devices from a single enclosure.

Lifesafety Power · FPO150-B100C4D8E2

Lifesafety Power FPO150-B100C4D8E2 Power supply board 150W 12A/1

150W secondary power supply board for distributed power infrastructure in access control and security systems

• Delivers 12A @ 12VDC or 6A @ 24VDC from a single 150W board.
• 12 independently fused outputs (4 relay + 8 aux) prevent cascade faults.
• 4.5-inch depth fits shallow wall-mount and 19-inch rack enclosures.

Lifesafety Power · FPO150-B100C4D8E2M

Lifesafety Power FPO150-B100C4D8E2M Power supply board 150W 12A

150W power supply board rated for either 12VDC at 12A or 24VDC at 6A output

• Dual-voltage output (12VDC/12A or 24VDC/6A) supports legacy and modern loads from one board.
• 150W rated supply simplifies centralized power distribution for access control and auxiliary loads.
• Board-level form factor integrates into Lifesafety Power enclosures; verify mounting compatibility before ordering.

Lifesafety Power · FPO150-B100C4D8E4M

Lifesafety Power FPO150-B100C4D8E4M Power supply board 150W 12A/1

150-watt power supply board designed to distribute regulated DC voltage across multiple endpoints in access control, surveillance, and alarm system

• Selectable 12VDC/12A or 24VDC/6A output supports mixed-voltage device deployments.
• 150W capacity powers roughly 12–15 door locks plus access readers on a single board.
• Board form factor integrates directly into enclosures and distributed power nodes.

Lifesafety Power · FPO150-B100C4D8E8S

Lifesafety Power FPO150-B100C4D8E8S 150W power supply 12A/12V

150W regulated power supply configured for access control and security infrastructure requiring distributed 12V or 24V power with integrated relay

• Primary output delivers 12A @ 12VDC or 6A @ 24VDC from a single 150W supply.
• Four relay outputs are independently fused at 3A with per-output fail-safe/fail-secure selection.
• Eight aux DC outputs and an adjustable 5–18V secondary support mixed loads on isolated buses.

Lifesafety Power · FPO150-B100C4P2D8PE1

Lifesafety Power FPO150-B100C4P2D8PE1 Standard Power Systems150W

150W standard power supply designed to distribute regulated DC power across multiple surveillance and access control devices

• 150W regulated DC output centralizes power for cameras, locks, and readers.
• Four relay lock outputs support electromagnetic and electronic door control.
• 16 auxiliary outputs integrate sensors, strobes, and status indicators.

Lifesafety Power · FPO150-B100C4PD8PE2

Lifesafety Power FPO150-B100C4PD8PE2 150W power supply 12A/12V

150W regulated power supply designed for access control and life safety systems

• Switchable 12A/12V or 6A/24V primary output supports varied lock and device loads.
• Four relay outputs selectable per-channel for FAI, fail-safe, or fail-secure door control.
• Eight Class 2 DC auxiliary outputs at 2.5A each, assignable across two independent buses.

Lifesafety Power · FPO150-B100C82D8E4M/T8-A

Lifesafety Power FPO150-B100C82D8E4M/T8-A 150W power supply 12A

150W primary power module designed for distributed access control and security infrastructure

• Dual primary outputs deliver 12A@12V or 6A@24V from a single 150W module.
• 8 relay outputs support mixed FAI/failsafe/failsecure modes in one enclosure.
• 16 aux DC outputs, each 3A-fused, assign independently to Bus1 or Bus2.

Lifesafety Power · FPO150-B100C82D8PE4H1/P8-C

Lifesafety Power FPO150-B100C82D8PE4H1/P8-C 150W power supply

Hardened power supply designed for access control and security infrastructure deployments

• Dual-voltage output (12VDC/12A or 24VDC/6A) supports legacy and modern lock hardware.
• 8 relay lock outputs, each fused at 3A with per-output failsafe/failsecure selection.
• 8 Class 2 auxiliary DC outputs with Bus1/Bus2 supervision paths reduce single-point failure risk.

Lifesafety Power · FPO150-B100C82D8PE4H1/P8-D

Lifesafety Power FPO150-B100C82D8PE4H1/P8-D 150W power supply

150W power supply designed for access control and security infrastructure requiring selectable 12V/12A or 24V/6A output

• 8 relay lock outputs, each fused at 3A, support failsafe, failsecure, or FAI modes.
• 8 class 2 auxiliary DC outputs at 2.5A each enable safe, code-compliant device power.
• Dual-bus architecture lets each auxiliary output select Bus1 or Bus2 independently.

Lifesafety Power · FPO150-B100C82D8PE4M/P8-A

Lifesafety Power FPO150-B100C82D8PE4M/P8-A 150W power supply 12A

150W industrial power supply engineered for security control infrastructure

• Dual-voltage output (12VDC/12A or 24VDC/6A) powers mixed endpoint devices from one chassis.
• Eight 3A relay outputs support per-door failsafe, failsecure, or FAI logic for life-safety integration.
• Sixteen Class 2 DC aux outputs with Bus1/Bus2 segregation simplify multi-zone circuit supervision.

Lifesafety Power · FPO150-B100C82D8PE4M/P8-B

Lifesafety Power FPO150-B100C82D8PE4M/P8-B 150W PS 12A/12V or 6A

150W distributed power supply designed for access control, door strike, and auxiliary device management in commercial security installations

• Dual-voltage output (12A/12V or 6A/24V) selectable without hardware modification.
• 8 relay lock channels, each fused at 3A with per-channel failsafe/failsecure selection.
• 24 independently supervised DC outputs isolate faults across doors, strikes, and sensors.

Lifesafety Power · FPO150-B100C82D8PE4M/P8-C

Lifesafety Power FPO150-B100C82D8PE4M/P8-C 150W power supply 12A

150W power supply engineered for access control and security system installations

• Delivers 12A @ 12VDC or 6A @ 24VDC to power multiple locks and control devices.
• 8 relay lock outputs are individually configurable for failsafe, failsecure, or FAI.
• 16 auxiliary outputs split across two buses simplify multi-zone load segregation.

Lifesafety Power · FPO150-B100C82D8PE4M/T8-A

Lifesafety Power FPO150-B100C82D8PE4M/T8-A 8DR E4M 150W 4A/12V

150W redundant power supply built for distributed door control and surveillance infrastructure

• 150W redundant supply delivers 4A at 12V and 4A at 24V across 8 isolated outputs.
• Dual-voltage design powers legacy 12V cameras and 24V access control from one unit.
• Eight separate output channels eliminate daisy-chain voltage sag across locks and readers.

Lifesafety Power · FPO150-B100C82D8PE4M/T8-C

Lifesafety Power FPO150-B100C82D8PE4M/T8-C PreWired Mercury 8DR

150W prewired access control power supply engineered for small-to-medium commercial deployments requiring distributed 12V and 24V power to door locks

• Delivers 4A at 12V and 4A at 24V simultaneously to power up to 8 door locks.
• Factory-prewired MR52 harnesses eliminate field termination and reduce install errors.
• 16 auxiliary outputs support relays, REX buttons, LEDs, and door sensors.

Lifesafety Power · FPO150-B100C82D8PE4M1/P8-B

Lifesafety Power FPO150-B100C82D8PE4M1/P8-B 150W power supply

150W integrated power supply and access control platform designed to consolidate door control, auxiliary power distribution, and battery supervision

• Dual 12VDC/24VDC bus runs mixed lock and reader types from one UL-listed cabinet.
• 8 fused 3A relay outputs plus 16 aux outputs cover doors and sensors without add-on hardware.
• Form C fault contacts report AC loss, blown fuses, and battery faults for clean FACP integration.

Lifesafety Power · FPO150-B100C82D8PE4M1/T8-A

Lifesafety Power FPO150-B100C82D8PE4M1/T8-A 8DR E4M 150W 4A/12V

150W distributed power supply rated 4A at both 12V and 24V outputs—built for access control, surveillance, and door management deployments where you

• Eight isolated 12V/24V rails prevent a single-device fault from collapsing system power.
• 150W envelope supports mixed mag locks, readers, and aux relays at 4A per rail.
• Ships pre-wired with tie-wrap harness, reducing bench time and installation wiring errors.

Lifesafety Power · FPO150-B100C82D8PE4M1/T8-C

Lifesafety Power FPO150-B100C82D8PE4M1/T8-C 8DR E4M 150W 4A/12V

150W distributed power supply purpose-built for multi-door access control installations

• 150W supply delivers 4A at 12V, powering up to 8 simultaneous lock solenoids.
• Factory pre-wired 8-door relay outputs reduce installation time in multi-door deployments.
• Switchable 12V/24V output supports both fail-safe and fail-secure lock circuit types.

Lifesafety Power · FPO150-B100C82D8PE6H/T8-C

Lifesafety Power FPO150-B100C82D8PE6H/T8-C 150W power supply 12A

• Delivers 12A at 12VDC or 6A at 24VDC to power multiple locks and readers.
• Eight relay outputs (3A each) offer per-channel failsafe or failsecure selection.
• Eight Class 2 auxiliary outputs (2.5A each) assign to Bus1 or Bus2 independently.

Lifesafety Power · FPO150-B100C82D8PE6M

Lifesafety Power FPO150-B100C82D8PE6M Pwr supply board 150W 12A

150W centralized power supply board designed for distributed access control and security systems

• 150W board delivers 12A at 12VDC or 6A at 24VDC from a single centralized supply.
• 8 relay lock outputs (3A fused each) isolate high-inrush strike loads from sensitive circuits.
• Fits Mercury/Lenel backplates, integrating into legacy and current access control cabinets.

Lifesafety Power · FPO150-B100C82D8PE6M/P8-A

Lifesafety Power FPO150-B100C82D8PE6M/P8-A 150W power supply 12A

150W cabinet-mounted power supply designed to distribute power to multiple security endpoints in medium-scale access control and surveillance

• Delivers 12A@12VDC or 6A@24VDC primary to power cameras, readers, and strikes in one zone.
• 16 class-2 auxiliary outputs at 2.5A each, assignable to Bus1 or Bus2 for circuit isolation.
• Four relay outputs support failsafe, failsecure, or FAI logic for compliant door control.

Lifesafety Power · FPO150-B100C82D8PE6M/T8-A

Lifesafety Power FPO150-B100C82D8PE6M/T8-A 8DR E6M 150W 4A/12V&4A

150W 8-output regulated power supply designed for small-to-medium access control and surveillance installations requiring dual-voltage DC outputs

• Dual-rail 12V/24V DC output powers mixed-voltage devices from a single 150W chassis.
• Eight independent outputs let you distribute mag locks, strikes, and strobes without daisy-chaining.
• 120V AC mains input; each output rail is capped at 4A to prevent thermal overload.

Lifesafety Power · FPO150-B100C82D8PE6M/T8-C

Lifesafety Power FPO150-B100C82D8PE6M/T8-C Mercury ProWire Power

Dual-voltage access control power supply engineered to integrate FlexPower modules, door locks, readers, and fire alarm signaling into a single

• 150W total output supports 8–16 door deployments across 16 auxiliary and 8 relay outputs.
• Dual 12V/24V buses eliminate separate supplies for mixed-voltage lock and reader installations.
• Built-in Form C fire alarm disconnect triggers automatic door unlock without external relays.

Lifesafety Power · FPO150-B100C82D8PE8H/P8-C

Lifesafety Power FPO150-B100C82D8PE8H/P8-C 150W power supply 12A

150W power supply rated at 12A output, delivering selectable 12V or 24V primary voltage with adjustable 5–18V secondary output at up to 4A

• Delivers 150W at 12A/12V or 6A/24V to power multi-door access control systems.
• 8 Class 2 relay outputs fused at 3A each support failsafe or failsecure door mode.
• 16 DC aux outputs at 2.5A routable across dual Bus1/Bus2 channels for zone flexibility.

Lifesafety Power · FPO150-B100C8D8E2M

Lifesafety Power FPO150-B100C8D8E2M Power supply board 150W 12A

150W board-level power supply engineered for distributed power architecture in mid-scale security and access control installations

• Delivers 12VDC @ 12A or 24VDC @ 6A to match legacy and modern endpoint requirements.
• Board-only form factor integrates directly into custom chassis or existing backplane infrastructure.
• 150W capacity supports mid-scale camera and access control arrays without a centralized supply.

Lifesafety Power · FPO150-B100C8D8E4-4DM2

Lifesafety Power FPO150-B100C8D8E4-4DM2 150W (12V & 24V) 8 lock/8

150W modular power supply engineered for distributed access control and surveillance installations

• Delivers simultaneous 12V and 24V outputs across eight auxiliary ports in one unit.
• 150W modular frame supports up to eight plug-in modules for field-customized deployments.
• Mounts in standard 19-inch racks or wall cabinets; runs on 120VAC commercial power.

Lifesafety Power · FPO150-B100C8D8E4A

Lifesafety Power FPO150-B100C8D8E4A FPO150-B100C8D8E4A

150W modular power supply designed for distributed access-control installations, electric-lock circuits, and auxiliary DC loads

• 150W dual-rail output (12V@12A or 24V@6A) covers legacy and modern door hardware.
• 8 relay lock outputs and 8 fused DC channels eliminate external contactors and regulators.
• Adjustable 5–18V@4A Class 2 secondary rail powers readers and sensors without add-on modules.

Lifesafety Power · FPO150-B100C8D8E4S

Lifesafety Power FPO150-B100C8D8E4S 150W power supply 12A/12V

150W supervised power supply designed for access control and life safety installations requiring multiple relay-switched load control

• Delivers 12A at 12VDC or 6A at 24VDC from a single 150W supervised supply.
• Eight independently 3A-fused relay outputs support fail-safe or fail-secure selection per door.
• Eight DC auxiliary outputs with dual-bus support isolate faults across distributed access points.

Lifesafety Power · FPO150-B100C8D8E4X

Lifesafety Power FPO150-B100C8D8E4X 150W power supply 12A/12V

150W distributed power supply designed for access control, door locks, and auxiliary load integration in mid-scale security deployments

• Delivers 12A at 12VDC or 6A at 24VDC, configurable for mixed-voltage door deployments.
• 8 individually fused 3A relay outputs support per-output failsafe, failsecure, or FAI modes.
• 8 DC auxiliary outputs on dual selectable buses isolate load domains to contain fault impact.