Lifesafety Power FPO150-B100C82D8PE4H1/P8-D 150W Power Supply
Overview
The FPO150-B100C82D8PE4H1/P8-D is a 150W power supply designed for access control and security infrastructure requiring selectable 12V/12A or 24V/6A output. This unit delivers dual functionality: 8 relay lock control outputs (3A per output, individually fused) and 8 DC auxiliary outputs (2.5A per output, class 2 power-limited). Each relay output is independently configurable for FAI (fail-as-is), failsafe, or failsecure operation—critical for mixed-credential installations where different door types demand different fail modes. The dual bus architecture (Bus1/Bus2 selection per auxiliary output) supports modular access control topologies without requiring separate power distribution boards.
Compatibility
The FPO150-B100C82D8PE4H1/P8-D integrates with FAI-compatible access control systems and architectures that require granular per-door fail-mode control. It works in environments deploying multiple reader types or mixed credential protocols where individual door outputs must operate independently under different power-loss scenarios. Verify your access control panel's relay input specifications and auxiliary bus configuration before integration.
Installation Notes
Each of the 8 relay outputs is fused at 3A to protect downstream magnetic locks and fail-safe hardware; plan lock selection and wiring so total draw per output does not exceed 3A sustained. Auxiliary outputs are class 2 power-limited at 2.5A per output—suitable for status indicators, sensors, and low-power accessories but unsuitable for heavy solenoids or sustained high-current loads. Configure Bus1/Bus2 assignment before cabinet commissioning to avoid mid-deployment rewiring. Verify input voltage matches your facility's power distribution (120V or 240V AC primary) and confirm the 12V or 24V secondary selection required by your panel before installation.
