Lifesafety Power FPO150-B100C82D8PE4M1/P8-B Dual-Voltage Power Supply with Access Control Outputs
Overview
The FPO150-B100C82D8PE4M1/P8-B is a 150W integrated power supply and access control platform designed to consolidate door control, auxiliary power distribution, and battery supervision into a single UL-listed enclosure. It solves the fragmentation problem in mid-scale access control deployments where power infrastructure, battery backup, and relay outputs would otherwise require separate components. The dual-voltage bus architecture—supporting both 12VDC and 24VDC zones independently—lets you power heterogeneous lock types and readers from a single cabinet without conversion modules.
Core Specifications & Deployment Benefits
The unit delivers 150W total output across two voltage domains, meaning you can run high-current 12VDC electromagnetic locks on one bus while powering 24VDC readers on the other—critical for facilities with mixed legacy and modern hardware. Eight 3A fused relay outputs (C8 module) provide programmable failsafe/failsecure control per door or zone, with dry or voltage output modes; dual color OutSmart LEDs (12V green, 24V blue) give technicians immediate visual feedback on power state without a laptop. Sixteen 2.5A Class 2 auxiliary outputs (D8P module) handle low-power devices—sensors, status lights, small solenoids—without consuming relay capacity. The integrated fast battery charger prolongs lithium and sealed-lead backup battery life by preventing overcharge; low-battery cutoff protects cells from deep discharge that shortens lifespan by 40–60% on typical lithium packs. Fire alarm input triggers automatic door unlock per code, while AC fault and system fault Form C contacts signal failures to a building management system or central station.
Power & Environmental Specifications
120VAC input (standard North American branch circuit); 24H × 20W × 6.5D inches fits standard wall-mount or cabinet rail installations; 32.2 lbs requires standard bracket and 20A breaker. Operating temperature not specified in available evidence. The enclosure is UL listed, confirming compliance with fire and electrical safety codes required for access control in commercial occupancies.
Network Integration
Optional NetLink module enables IP-based power and battery monitoring via web dashboard—query battery state remotely, log voltage trends, and trigger automated test cycles without site visits. This is essential for multi-site operators managing dozens of power subsystems.
When to Choose a Different Model
If your deployment requires integrated video IP camera PoE power from the same enclosure, or if you need more than 16 auxiliary channels, evaluate higher-capacity or modular variants from the Lifesafety Power catalog. If fire alarm integration is not required, a simpler dual-output supply may reduce cost and complexity.
