Lifesafety Power FPO150-B1002D8PE8M2 150W Power Supply
Overview
The FPO150-B1002D8PE8M2 is a 150W industrial-grade power supply rated 12A/12V or 6A/24V output, designed to feed distributed access control and security systems where multiple devices pull from a centralized source. Eight DC auxiliary outputs—each delivering up to 2.5A and Class 2 power-limited—allow you to daisy-chain readers, locks, intercoms, or other 12/24V loads without burning separate supplies for each run. Every output is independently selectable for Bus1 or Bus2 topology, so you can split loads across redundant or isolated circuits without reconfiguration.
Compatibility
The FPO150-B1002D8PE8M2 operates within Lifesafety Power's Bus1/Bus2 power architecture, commonly integrated into Honeywell, dormakaba, and other enterprise access control panels that expect multi-output 12/24V supply arrays. Verify your panel or system specifies Bus1 or Bus2 compatibility before ordering; output selectivity is a key design feature and assumes your control system or installer will configure load distribution at commissioning. The unit fits the E8 enclosure form factor (36H × 30W × 6.5D inches), a standard depth for wall-mount or DIN-rail installations in server rooms, electrical closets, or equipment racks.
Installation Notes
Eight separate terminal connections are provided for the auxiliary outputs. Each output is independently fused and power-limited at 2.5A—overloads on any single branch will not cascade. The enclosure is designed for indoor, climate-controlled environments; no environmental rating is specified for outdoor or wet mounting. Total wattage capacity is 150W (12A @ 12V); confirm load aggregation does not exceed this headroom when distributing across all eight outputs. Connection to the main AC input and primary 12/24V rails requires standard line-voltage wiring practices and should be performed or verified by a licensed electrician or certified integrator.
What's in the Box
- FPO150-B1002D8PE8M2 power supply unit in E8 enclosure
