Lifesafety Power FPO150-B100C8PD8E4M 150W Access Control Power Supply
Overview
The FPO150-B100C8PD8E4M is a 150W dedicated power supply engineered for access control and door management systems. It delivers selectable 12VDC or 24VDC primary output (12A at 12V, 6A at 24V) plus a 12V secondary channel at 4A — enabling multi-voltage endpoints and redundant control circuits in a single enclosure. The unit supports 8 relay lock control outputs (class 2 power-limited, 2.5A per output) with per-output failsafe/failsecure selection, plus 8 DC auxiliary outputs (3A fused per output, assignable to Bus1 or Bus2). This architecture consolidates magnetic lock, electric strike, request-to-exit, and sensor power into one managed rails, reducing panel real estate and simplifying wiring for warehouse access points, loading dock gates, and secure perimeter entries.
Compatibility
The FPO150-B100C8PD8E4M integrates with Lifesafety Power access control product lines and third-party door controllers that accept 12V/24V supervised DC inputs and relay-switched outputs. Verify your controller's input voltage and output contact specifications (volt-free dry relay vs. powered output) before integration. The adjustable 5–18V output stage supports legacy and modern proportional solenoid locks requiring variable voltage.
Installation Notes
Enclosure dimensions: 24H × 20W × 4.5D inches with Mercury back plate. Mount in a locked cabinet or electrical enclosure to protect from tampering. Each relay and DC output must be fused or supervised according to your jurisdiction's electrical code and the lock manufacturer's rated current draw. Verify that aggregate lock current does not exceed 20A (8 outputs × 2.5A max) to avoid nuisance shutdown during simultaneous activation. Class 2 wiring permits low-voltage control and sensor circuits in the same conduit where local codes permit.
