Switch Modules

Plan Your Deployment

Switch model compatibility and supported module types
Fiber type selection (single-mode vs multi-mode)
Distance requirements and transceiver range
Uplink speed requirements (1G, 10G, etc.)
Network design and redundancy planning

Showing Results for Switch Modules

Compare

Add to Cart The item has been added
ELK Products

SKU: ELK-6021

ELK Products ELK-6021 M1 Controls Transceiver

M1 Controls transceiver for signal extension and module communication
In stock · Usually Ships Same Business Day

$78.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SFP-FLCM202

Hanwha SFP-FLCM202 Fiber Optic SFP Module

100 Mbps fiber SFP module with 2km reach over single-mode
- 1310nm wavelength spans up to 2 kilometers on single-mode fiber
- LC connectors with -40°C to +75°C operating range for outdoor use
- SFP hot-swap form factor fits managed and unmanaged switches
Special Order · Usually Ships in 2-3 Weeks

$160.00 $119.99 Save $40.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SFP-FLCS220

Hanwha SFP-FLCS220 Fiber Optic SFP Module

100Mbps fiber SFP module with 20km reach for surveillance networks
- 1310nm single-mode LC connectors span up to 20 kilometers without signal loss
- 100Mbps Fast Ethernet performance for managed switches and media converters
- Operates reliably from -40°C to +75°C in indoor and outdoor deployments
Special Order · Usually Ships in 2-3 Weeks

$170.00 $127.99 Save $42.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SFP-FSCM102-A

Hanwha SFP-FSCM102-A Fiber Optic SFP Module

100Mbps single-mode fiber SFP module for surveillance and network extension
- 1310nm wavelength reaches 2 kilometers over single-mode fiber
- SC optical connectors work with managed switches and media converters
- Rated -40°C to +75°C for outdoor and industrial deployments
Special Order · Usually Ships in 2-3 Weeks

$260.00 $194.99 Save $65.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SFP-FSCM102-B

Hanwha SFP-FSCM102-B Fiber Optic SFP Module

100 Mbps fiber SFP module with 2km reach for industrial networks
- 1550nm wavelength SC connector extends connectivity up to 2 kilometers
- Industrial-grade operation from -40°C to +75°C in harsh environments
- Hot-swappable SFP form factor fits managed/unmanaged switches and converters
Special Order · Usually Ships in 2-3 Weeks

$260.00 $194.99 Save $65.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SFP-FSCS120-A

Hanwha SFP-FSCS120-A Fiber Optic SFP Module

100Mbps single-mode fiber SFP for surveillance and network uplinks to 20km
- 1310nm wavelength reaches 20 kilometers over single-mode fiber with SC connector
- 100Mbps Fast Ethernet for IP cameras, managed switches, and media converters
- Operates -40°C to +75°C in outdoor and demanding network environments
Special Order · Usually Ships in 2-3 Weeks

$260.00 $194.99 Save $65.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SFP-FSCS120-B

Hanwha SFP-FSCS120-B Fiber Optic SFP Module

100Mbps SFP module with 20km single-mode reach for surveillance networks
- 1550nm wavelength reaches up to 20km over single-mode fiber
- 100Mbps Fast Ethernet suitable for IP camera and network backbone links
- SC connectors, -40°C to +75°C operation for outdoor deployments
Special Order · Usually Ships in 2-3 Weeks

$260.00 $194.99 Save $65.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SFP-GLCM202

Hanwha SFP-GLCM202 1000Mbps Fiber Optic Module

1000Mbps fiber SFP module with 2km reach for surveillance networks
- 1310nm multi-mode fiber with LC connector for standard infrastructure
- 2km maximum reach supports extended network topology across facilities
- Operates -40°C to +75°C; MSA-compliant for managed and unmanaged switches
Special Order · Usually Ships in 2-3 Weeks

$325.00 $243.99 Save $81.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SFP-GLCS120-A

Hanwha SFP-GLCS120-A 1000Mbps Fiber Optic Module

Gigabit fiber module with 20km reach for extended network runs
- 1000Mbps over single-mode fiber at distances up to 20km with 1310nm wavelength
- LC duplex connectors work with managed/unmanaged switches and media converters
- SFP form factor rated -40°C to +75°C for indoor and outdoor surveillance setups
Special Order · Usually Ships in 2-3 Weeks

$385.00 $288.99 Save $96.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SFP-GLCS120-B

Hanwha SFP-GLCS120-B 1000Mbps Fiber Optic Module

Gigabit single-mode fiber module, 20km reach for long-distance links
- 1000Mbps data rate with 1550nm wavelength over single-mode fiber
- LC connector operates -40°C to +75°C for indoor and outdoor use
- Compatible with managed switches, unmanaged switches, media converters
Special Order · Usually Ships in 2-3 Weeks

$385.00 $288.99 Save $96.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SFP-GLCS215

Hanwha SFP-GLCS215 1000Mbps Fiber Optic Module

Gigabit fiber module with 15km reach for long-distance surveillance
- 1000Mbps data rate over single-mode 1310nm wavelength to 15km
- LC duplex connectors work with managed/unmanaged switches and converters
- Operates -40°C to +75°C for outdoor and industrial network deployments
Special Order · Usually Ships in 2-3 Weeks

$160.00 $119.99 Save $40.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SFP-GRJC

Hanwha SFP-GRJC Fiber Optic RJ45 Media Converter

SFP fiber-to-RJ45 converter for Gigabit networks in extreme temperatures
- Supports 10/100/1000Mbps over standard RJ45 copper connections
- Hot-swappable SFP form factor fits managed and unmanaged switches
- Rated -40°C to +75°C for outdoor and industrial deployments
Special Order · Usually Ships in 2-3 Weeks

$225.00 $168.99 Save $56.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SKY-SWSFP-001

Hanwha SKY-SWSFP-001 Wisenet SFP MMF Module

SFP MMF module for Wisenet SKY Switches, 1.25Gbps over 550 meters
- Multi-mode fiber at 850nm wavelength with hot-swappable SFP form factor
- 1.25Gbps data transfer speed supports multiple HD IP camera streams
- 550-meter transmission range for campus-scale surveillance without regeneration
Special Order · Usually Ships in 2-3 Weeks

$68.00 $50.99 Save $17.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SKY-SWSFP-002

Hanwha SKY-SWSFP-002 Switch SFP Copper Module

SFP copper multimode fiber module for Hanwha network switches
Special Order · Usually Ships in 2-3 Weeks

$173.00 $56.99 Save $116.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: WRR-P-S10GBSFP

Hanwha WRR-P-S10GBSFP 10G SFP Recording Server Module

10 Gigabit SFP module for Hanwha Wave Recording Server scaling
- 10G SFP connectivity reduces latency in multi-camera deployments
- H.265 compression support maximizes bandwidth efficiency at scale
- Direct Wave Recording Server integration for enterprise surveillance
Special Order · Usually Ships in 2-3 Weeks

$950.00 $703.99 Save $246.01

Add to Cart
The item has been added
Compare

Out of stock
Lantronix

SKU: SI-IES-521D-LRT

Lantronix SI-IES-521D-LRT Industrial Ethernet Switch 10G SFP+

Compact industrial switch with 10G SFP+ fiber and DIN rail mount
Special Order · Usually Ships in 2-3 Weeks

$407.99 $362.99 Save $45.00

Add to Cart
The item has been added

What to Look For When Buying

The decisions that matter most before you spec.

Match Module Type to Switch Chassis & Port Density

Switch modules must be compatible with your base switch hardware—verify slot types (SFP, QSFP, fixed vs. modular). Network collapse at the core often stems from mismatched uplink modules or insufficient expansion capacity when adding cameras to existing infrastructure.

Fiber Distance & Multimode vs. Single-Mode Selection

Single-mode fiber modules (9/125 µm) reach 10+ km; multi-mode (50/125 or 62.5/125 µm) typical to 2km. Choose based on inter-building distance and backbone topology. Wrong fiber type wastes budget and creates signal attenuation that degrades video frame rate and reliability across distributed sites.

Power Budget & PoE Scaling Across Modular Builds

Modular switches with integrated PoE modules must provide sufficient power delivery per port and across the entire stack. PoE budget planning becomes critical when clustering switches; undersized modules cause camera dropout and cascading system failures during peak recording.

Redundancy & Stacking for Mission-Critical Surveillance

Stacking modules and redundancy cards allow N+1 failover in surveillance backbones, preventing single points of failure. System failures during incidents are often caused by non-redundant core infrastructure; modular stacking protects uptime when incidents demand continuous monitoring.

Temperature & Environmental Hardening

Comnet and Transition Networks offer industrial-grade modules rated for -40°C to +70°C and conformal coating for outdoor or damp enclosures. Surveillance systems in uncontrolled environments require modules rated beyond commercial office specs to avoid thermal shutdown or corrosion.

Future Capacity Planning & Modular Growth

Select switches and modules with empty expansion slots to avoid forklift upgrades. Systems often exceed rated capacity within 2–3 years; modular architecture lets you add fiber uplinks or PoE cards without replacing the entire switch when scaling from 20 to 200+ cameras.

Technology Stack

The specs and acronyms that actually affect switch modules performance.

SFP / SFP+ / QSFP Transceivers

Small Form Factor pluggable modules that convert electrical signals to fiber optics (or vice versa). SFP handles 1 Gbps, SFP+ handles 10 Gbps, QSFP+ handles 40+ Gbps. Correct transceiver type matches your switch ports and bandwidth needs; mismatched modules won't seat or will downgrade performance.

Single-Mode vs. Multi-Mode Fiber

Single-mode (SMF, 9/125 µm core) supports 10+ km distances at lower cost per km but requires precision alignment; multi-mode (MMF, 50/125 µm) supports shorter distances (typically 300m–2km) with easier installation. Choose based on building spacing and budget; wrong choice means expensive rework or signal loss.

Port Density & Slot Type Compatibility

Modular switches have fixed slot configurations (e.g., 4-slot chassis accepts modules with specific form factors). Verify your base switch model supports the module you're ordering; plugging an SFP+ module into an SFP-only slot will not work and delays deployment.

Stacking Bandwidth & Backplane Throughput

Stacking cables and modules interconnect multiple switches into one logical unit with aggregated bandwidth. Insufficient backplane throughput (e.g., 48 Gbps backplane on switches with 48×1Gbps ports) creates bottlenecks between stacked units and limits surveillance backbone capacity.

PoE Power Budget Per Module & Chassis

PoE modules supply up to 30W per port (PoE+) or 95W per port (PoE++). Verify your module's total power delivery and the switch's power supply capacity; PoE injectors can augment undersized modules for camera-heavy deployments.

Managed vs. Unmanaged Module Features

Managed modules support VLAN tagging, spanning tree (STP), link aggregation, and SNMP monitoring; unmanaged are plug-and-play. Surveillance networks benefit from managed features to isolate camera traffic, ensure failover, and monitor uplink health during incidents.

Typical Deployment Scenarios

Multi-Building Campus with 300+ IP Cameras

Three buildings 500m apart connected via media converters and single-mode fiber modules. Core stack: 2× managed switches with stacking modules, each with 4 SFP+ uplink modules (10 Gbps each) and integrated PoE cards supplying 960W per switch. Redundancy ensures building isolation if one core switch fails. Core network design prevents collapse under concurrent recording.

K-12 School District: Classroom + Perimeter Expansion

Elementary school adds 80 cameras in phases. Start with one managed switch (12 fixed PoE ports), upgrade to modular chassis with 2 PoE modules (48 additional PoE ports) and 1 fiber uplink module to connect the high school 2km away. K-12 surveillance design recommends staged modular expansion to match budget cycles without downtime.

Warehouse + Loading Dock: Data Capture Across Three Zones

Distributed warehouse data capture system with 150 IP cameras and RFID readers across climate-controlled zones. Core: industrial-grade Transition Networks modular switch with 4 PoE modules (120 cameras + 30 IoT devices). Fiber modules uplink to routers in central monitoring room. Temperature-hardened modules resist dock condensation and freezer environments.

High-Density Edge Deployment: 200 Cameras, Single Ceiling Cabinet

Compact surveillance node: 1 managed switch with 4 SFP+ fiber modules and 2 PoE modules stacked in U-space. Axis cameras feed into local PoE modules; fiber uplinks carry traffic to central video storage and access control core. Single module failure doesn't cascade; redundant power supplies prevent module dropout during events.

Frequently Asked Questions

What is the difference between SFP and SFP+ switch modules?

SFP (Small Form Factor Pluggable) transceivers handle 1 Gbps over copper or fiber; SFP+ handles 10 Gbps. Both fit the same form factor but are not cross-compatible—an SFP module will not work at full speed in an SFP+ slot, and vice versa. Always match transceiver speed to your switch's port rating and your bandwidth demand. For surveillance backbones carrying 50+ 4K cameras, 10 Gbps SFP+ modules prevent congestion.

How do I know if a switch module is compatible with my switch?

Check your switch's model number and documentation for supported module types (SFP, QSFP, PoE vs. line-card modules). Verify slot count, port count, and power budget. Comnet and Transition Networks publish detailed compatibility matrices; contact Ask an Expert if your model is not clearly documented. Incompatible modules will not seat or will error-out during startup.

What fiber distance do I need: single-mode or multi-mode?

Single-mode fiber reaches 10+ km reliably; multi-mode is typically 300m–2km depending on grade and wavelength. Measure the distance between your switch locations (including vertical runs in stacked buildings). For distances under 500m, multi-mode is cost-effective; over 1km, single-mode becomes competitive in total cost. Wrong choice results in signal loss, dropped frames, or camera disconnects.

Can I stack switch modules from different manufacturers?

Most industrial switches support vendor-agnostic stacking via standard stacking cables and backplanes, but verify before purchase. Transition Networks and Comnet industrial modules often support cross-vendor stacking under same protocol (e.g., Ethernet stacking). Consumer-grade modules typically require matching brands. Always confirm in the switch datasheet to avoid a non-functional stack.

How much power do PoE switch modules consume and supply?

Standard PoE (15.4W per port, 30W total per port including switch overhead) and PoE+ (30W per port, 60W total) are typical ratings. A 12-port PoE module can supply ~360W; verify your power supply and UPS can handle total module load plus redundancy margin. For 100+ cameras, plan 5–10W per camera average draw; undersized modules cause brown-out and dropout. PoE budget planning guide details sizing.

What is stacking, and why do I need it for surveillance?

Stacking interconnects multiple switches via high-speed backplane cables, creating one logical switch with aggregated bandwidth and failover. If one physical switch fails, traffic reroutes through remaining units. For surveillance, stacking prevents single points of failure in the backbone; system failures during incidents are often caused by core switch collapse. Redundant stacking is critical for mission-critical deployments like access control integration and continuous recording.

Plan Your Deployment

Showing Results for Switch Modules

ELK Products ELK-6021 M1 Controls Transceiver

Hanwha SFP-FLCM202 Fiber Optic SFP Module

Hanwha SFP-FLCS220 Fiber Optic SFP Module

Hanwha SFP-FSCM102-A Fiber Optic SFP Module

Hanwha SFP-FSCM102-B Fiber Optic SFP Module

Hanwha SFP-FSCS120-A Fiber Optic SFP Module

Hanwha SFP-FSCS120-B Fiber Optic SFP Module

Hanwha SFP-GLCM202 1000Mbps Fiber Optic Module

Hanwha SFP-GLCS120-A 1000Mbps Fiber Optic Module

Hanwha SFP-GLCS120-B 1000Mbps Fiber Optic Module

Hanwha SFP-GLCS215 1000Mbps Fiber Optic Module

Hanwha SFP-GRJC Fiber Optic RJ45 Media Converter

Hanwha SKY-SWSFP-001 Wisenet SFP MMF Module

Hanwha SKY-SWSFP-002 Switch SFP Copper Module

Hanwha WRR-P-S10GBSFP 10G SFP Recording Server Module

Lantronix SI-IES-521D-LRT Industrial Ethernet Switch 10G SFP+

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Switch Modules

Frequently Asked Questions

Related Categories

Engineering Reading