Trim Rings
Showing Results for Trim Rings
-
Axis
SKU: 5507-111
Axis F8212 Trim Ring 10 pcs - 5507-111
Flush-mount trim rings for 4 Axis camera models, 10-pack
- Compatible with F1005-E, F1035-E, P1214-E, and P1224-E cameras
- Discreet ceiling and wall installation with minimal visual footprint
- 10 trim rings per pack for multi-location deployments
$119.00 $114.99 Save $4.01The item has been added -
Axis
SKU: 5507-101
Axis F8211 Pinhole Trim Ring 10 pcs - 5507-101
Pinhole trim rings for covert F1025 sensor deployments, 10-pack
- Pack of 10 units for multi-location surveillance installations
- Flush-mount design hides cameras behind thin wall surfaces
- IP68-rated for wall, ceiling, and recessed mounting points
$63.00 $60.99 Save $2.01The item has been added -
Axis
SKU: 02691-001
Axis TQ6906-E Protection Ring for Q62 Cameras - 02691-001
Impact-resistant protection ring for Axis Q62 cameras
- High-quality polymer construction shields against vandalism and impact
- Tool-free installation with included mounting hardware and instructions
- Discreet profile integrates with camera design while safeguarding lens
$41.00 $39.99 Save $1.01The item has been added -
Code Blue
SKU: 40002
Code Blue 40002 Centry Trim Ring Adaptor Kit
Trim ring adaptor kit for Code Blue Centry camera installations
- IP68-rated weatherproof seal maintained during recessed or surface mount
- 2MP resolution with H.264 and MJPEG compression options
- PoE powered with standard trim ring compatibility for professional aesthetics
$540.00 $467.99 Save $72.01The item has been added -
Code Blue
SKU: 41594
Code Blue 41594 Trim Ring IP2501 SS
- 304/316 stainless steel resists salt spray and moisture for 5+ year outdoor lifecycles.
- Engineered fit for IP2501 housings aligns with standard 4- or 6-hole bracket patterns.
- Integrated retention tabs hold housing within ±2mm tolerance, minimizing vibration drift.
$88.00 $87.99 Save $0.01The item has been added -
Code Blue
SKU: 41595
Code Blue 41595 Trim Ring IP5000/IA4100 SS
- Stainless steel construction resists corrosion in humid and salt-air outdoor environments.
- Direct fitment for IP5000 and IA4100 series — no modification or adapter plates required.
- Five-minute swap makes this a practical spare for service calls and unit refresh cycles.
$110.00 $109.99 Save $0.01The item has been added -
Code Blue
SKU: 40038
Code Blue Centry Trim Ring Field Kit-GAI - 40038
- Finishes Centry® speakerphone wall or pole installations with a clean trim interface.
- Field kit format enables on-site trim ring replacement without returning the unit.
- Verify Centry model revision against Code Blue accessories catalog before ordering.
$540.00 $449.99 Save $90.01The item has been added -
Code Blue
SKU: 41637
Code Blue Flushmnt IP1501 Trim Ring Kit - 41637
- Flush-mount trim ring kit for Code Blue IP1501 VoIP speakerphone
- Seals install gap between recessed phone and finished wall surface
- Drops onto IP1501 wall cutout - no custom trim cutting needed
$99.00 $98.99 Save $0.01The item has been added -
Code Blue
SKU: 41596
Code Blue Trim Ring IP2501/IA501 BS CC - 41596
- Direct-fit bezel for IP2501 and IA501 speakerphones; no adapter plates required.
- Single SKU supports wall, pole, recessed, and rack installations without modification.
- Passive mechanical component; no wiring or network connections needed to install.
$130.00 $129.99 Save $0.01The item has been added -
Code Blue
SKU: 41597
Code Blue Trim Ring IP5000/IA4100 BS CC - 41597
- Fits IP5000 VoIP and IA4100 analog faceplates; verify bolt pattern before ordering.
- Supports both surface-mount and recessed wall installations with no extra hardware.
- Conceals installation gaps and fastener heads for a clean, finished deployment.
$140.00 $139.99 Save $0.01The item has been added -
Digital Watchdog
SKU: DWC-MCBLU
Digital Watchdog DWC-MCBLU Micro Dome Trim Ring Blue
Blue trim ring for Digital Watchdog micro dome cameras
- Tool-free installation with no impact on camera performance
- Fade-resistant polymer construction for indoor and outdoor use
- Professional appearance across retail, corporate, education, healthcare
$38.00 $24.99 Save $13.01The item has been added -
Digital Watchdog
SKU: DWC-MCGRN
Digital Watchdog DWC-MCGRN Micro Dome Trim Ring Green
Green trim ring for Digital Watchdog micro dome cameras
- Tool-free attachment fits Digital Watchdog micro dome models
- Durable construction maintains color and integrity in any environment
- Vibrant green finish for branding and camera identification
$38.00 $24.99 Save $13.01The item has been added -
Digital Watchdog
SKU: DWC-MCRED
Digital Watchdog DWC-MCRED Micro Dome Trim Ring Red
Red trim ring for Digital Watchdog micro dome cameras
- Tool-free installation on compatible Digital Watchdog micro domes
- Vibrant red color for branding, identification, or location coding
- Durable high-quality construction for varied surveillance environments
$38.00 $24.99 Save $13.01The item has been added -
Kantech
SKU: KTES-INDEX-R
Kantech KTES-INDEX-R Black Trim Ring for Flush Mount
Black trim ring for Kantech flush-mount access readers
- Black trim ring for Kantech flush-mount readers
- Precision alignment maintains clean visual line
- Protective edging around reader interface housing
$293.00 $209.99 Save $83.01The item has been added
Trim Rings
Trim rings provide a clean, finished appearance for dome and recessed camera installations. They help conceal ceiling cutouts, cover gaps, and support a professional install finish across commercial environments.
Plan Your Deployment
- Compatibility with specific camera models
- Ceiling type and cutout dimensions
- Recessed vs surface-mount installation approach
- Finish requirements for customer-facing environments
- Service access and re-entry considerations
Trim Rings — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 3 working models of trim rings sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.