Geovision · 84-POE1601-001U

Geovision 84-POE1601-001U GV-POE1601 16-Port PoE+ Switch

16-port managed PoE+ switch purpose-built for mid-to-large IP security camera installations

• 16 PoE+ ports (802.3at) deliver up to 30W each for cameras, readers, and intercoms.
• 250W total power budget supports mid-to-large camera deployments without separate injectors.
• Dual gigabit uplinks (RJ-45 copper or SFP) connect to core switches or NVRs flexibly.

Geovision · 84-SD2200S-2012

Geovision 84-SD2200S-2012 Network Switch

N outdoor-rated network switch designed to deliver PoE power and data connectivity for IP-based PTZ camera systems

• Outdoor-rated enclosure eliminates need for a separate climate-controlled cabinet.
• Delivers 802.3af PoE (up to 13W per port) to power IP PTZ cameras over data cable.
• 60 Hz operation suits IP surveillance deployments requiring stable power distribution.

Geovision · 84-SDIREPE-001U

Geovision 84-SDIREPE-001U GV HD-SDI Repeater

N HD-SDI repeater designed to extend HD-SDI video signal transmission over longer cable distances without quality loss

• Active signal regeneration eliminates ghosting and attenuation on long coaxial runs.
• Extends HD-SDI transmission beyond 300 ft where passive cabling alone would fail.
• Operates on 12V DC; integrates directly with GV-DVR HD-SDI and GV-Hybrid recorders.

Geovision · 85-NAS2008-001U

Geovision 85-NAS2008-001U Linux-Based NAS Accessory

Linux-based network-attached storage accessory designed to augment recording capacity and data retention for Geovision access control and

• Linux-based OS delivers stable 24/7 uptime for continuous surveillance recording workloads.
• SMB/CIFS and NFS support integrates over standard Ethernet with Geovision and third-party tools.
• Native Geovision platform support eliminates cross-platform middleware on heterogeneous deployments.

Geovision · GV-APOE0811

Geovision GV-APOE0811 8-Port PoE+ Switch

8-port PoE+ gigabit switch for IP cameras and networked security devices

• 8 gigabit PoE+ ports deliver 802.3at power, eliminating separate injectors per device.
• 2 dedicated gigabit uplinks enable clean backbone aggregation and direct NVR integration.
• Managed architecture supports VLAN, QoS, and port mirroring for segmented security networks.

Geovision · GV-APOE0811-140

Geovision GV-APOE0811 8-Port PoE+ Switch

8-port PoE+ switch with gigabit uplinks for IP camera deployments

• All 8 ports deliver 802.3at PoE+ power, eliminating separate injectors for PTZ cameras.
• 140W total power budget supports simultaneous operation of multiple high-draw IP devices.
• Two dedicated gigabit uplinks provide clean backhaul separation to NVRs or core switches.

Geovision · GV-NAS2008

Geovision GV-NAS2008 Linux-Based NAS

Linux NAS for IP video surveillance with multi-vendor camera support

• ONVIF-compliant; integrates with Axis, Hikvision, Hanwha, Vivotek, and Geovision cameras.
• Linux OS enables SSH and CLI config, fitting into existing infrastructure without proprietary tools.
• Functions as a distributed recording node or VMS offload target for long-term video retention.

Geovision · GV-PA903BT

Geovision GV-PA903BT Gigabit PoE Injector

Gigabit PoE injector for IP cameras over existing CAT5e/CAT6

• Delivers 802.3af-compliant 15.4W PoE, powering standard IP cameras without local AC.
• Passes full 1000 Mbps Gigabit throughput, supporting high-bandwidth multi-camera streams.
• Plug-and-play with zero configuration required; works over existing CAT5e/CAT6 runs.

Geovision · 84-POE0400-001U

Geovision GV-POE0400 4 Port POE Switch - 84-POE0400-001U

4-port PoE+ switch that consolidates power and data delivery for small to mid-scale IP surveillance deployments

• Delivers 802.3at PoE+ across 4 ports to power cameras up to 17W each.
• 70W shared power budget supports small surveillance zones on a single switch.
• Plug-and-play with any ONVIF-compliant camera over standard Cat5e or Cat6.

Geovision · GV-POE0811

Geovision GV-POE0811 8-Port Managed PoE+ Switch

8-port gigabit managed switch with PoE+ power on all ports

• All 8 gigabit ports deliver simultaneous PoE+ (802.3at) up to 30W each.
• Managed VLAN and per-port QoS isolate surveillance traffic on shared networks.
• 1000 Mbps per-port throughput sustains multiple concurrent 4K camera streams.

GRI · 2600

GRI 2600 Water Sensor with Relay

Passive water sensor with relay for 12V/24V alarm systems, no power needed

• Water sensor with built-in N.O. relay - no intermediate switching
• Conductive moisture probe distinguishes water from humidity
• 12V/24V alarm system compatible for direct panel zone wiring

GRI · 4561

GRI 4561 Tilt Sensor

Miniature tilt sensor detects 13.3mm displacement for tamper detection

• Compact 2.0 x 0.75 inch tilt sensor for covert equipment monitoring
• Detects panel, cabinet, or display rotation away from secured position
• 25A switching capacity, 5VA max for direct alarm zone wiring

GRI · 4561R

GRI 4561R Tilt Sensor with Relay

Tilt sensor with relay output for door and window monitoring

• Tilt sensor with integrated N.O./N.C. relay output to panel
• Switches clean contact closure - no software parsing needed
• 5VA max switching capacity for direct alarm zone integration

GRI · DPARM

GRI DPARM Closed Loop Pool Access Alarm

Closed-loop pool perimeter alarm with integrated access control

• Closed-loop pool access alarm with continuous circuit monitoring
• Detects tampering or line cuts immediately - no silent failures
• 9V battery operation - drop-in for residential pool perimeter

GRI · GR3045

GRI GR3045 Panic Switch

Hardwired panic switch with 80A relay capacity for emergency response

• Finger-tip panic switch handles up to 80A direct alarm relay loads
• Deliberate-actuation lever prevents accidental triggering
• Operates 32 to 140 degrees F for unconditioned panic-button placement

GRI · H8800

GRI H8800 Humidity Sensor

Precision RH sensor for HVAC, data centers, and facility monitoring

• Humidity sensor for HVAC, climate control, and facility monitoring
• 10VDC operation drops into standard sensor power buses
• Reliable output for commercial and industrial environment tracking

GRI · PAA

GRI PAA Pool Access Alarm

Standalone pool perimeter alarm with instant visual and audible alert

• Closed-loop pool access alarm tuned for pool perimeter coverage
• Ultralife 9V lithium battery for multi-year unattended operation
• Filters wind, animals, and vegetation movement false alarms

GRI · SG-2

GRI SG-2 ShockTec Vibration Sensor

Ground vibration sensor with 5–500 Hz detection for perimeter breach warning

• ShockTec vibration sensor detects climbing, cutting, and impact
• Standoff warning before intruder reaches the fence or barrier
• 12V DC or battery operation - relay contact closure to panel

GRI · T8800

GRI T8800 Temperature Sensor

Industrial temperature sensor for HVAC control and facility automation

• Industrial temperature sensor for factory floor and server rooms
• 10VDC operation drops into standard environmental monitoring loops
• US-made 1 lb housing for outdoor equipment enclosure deployments

GRI · WVS

GRI WVS Water Valve Shutoff

Automatic water shutoff controller stops floods at the source

• Automatic water valve shutoff triggers on flood or abnormal flow
• 55 mA draw at 12V DC - low alarm panel aux power impact
• Integrated battery backup keeps shutoff active during AC outage

Hanwha · CGA-1610

Hanwha CGA-1610 16-Channel Cloud Gateway Appliance

16-channel cloud gateway for mixed-vendor cameras up to 8MP

• Consolidates Hanwha and ONVIF third-party cameras onto one appliance
• Dual power input (12VDC or PoE++) with automatic failover support
• 11W–12.95W consumption; single Gigabit Ethernet for 16-camera streaming

Hanwha · EN-BR325-0

Hanwha EN-BR325-0 WISENET SKY CMVR 325 Network Switch

Field-hardened PoE network switch purpose-built for distributed IP security camera installations

• 4-port PoE 802.3af switch with 2TB onboard storage
• Cellular connectivity for remote-site backhaul
• Powers four 1MP cameras without separate PoE injectors

Hanwha · EN-SWSFP-001

Hanwha EN-SWSFP-001 SFP MMF Module

• 850nm multi-mode SFP fiber optic module for SKY switches
• Extends camera network beyond copper distance limits
• PoE+ 802.3at compatible for unified IP infrastructure

Hanwha · HV-GS970M/10PS-R-10

Hanwha HV-GS970M/10PS-R-10 Managed PoE+ Switch

8-port PoE+ managed switch with 124W budget for IP camera systems

• 8 Gigabit PoE+ ports with 124W total budget powers PTZ and multi-sensor cameras
• Layer 3 managed routing with VLAN segmentation for network isolation and control
• 20 Gbps switching fabric and 2 SFP fiber uplinks for backbone redundancy

Hanwha · HV-GS970M/18PS-R-10

Hanwha HV-GS970M/18PS-R-10 16-Port PoE+ Switch

16-port Gigabit PoE+ switch with 247W budget for IP cameras

• 16 x 1GbE PoE+ ports run high-power cameras without separate supplies
• 247W aggregate PoE budget supports 16 simultaneous cameras at full power
• Layer 3 managed switching with 2 x SFP uplinks for network segmentation

Hanwha · HV-GS970M/28PS-10

Hanwha HV-GS970M/28PS-10 24-Port PoE+ Switch

24-port PoE+ switch with 370W budget for mid-scale surveillance

• All 24 Gigabit ports deliver 802.3at PoE+ for cameras and edge devices
• 56 Gbps non-blocking fabric handles concurrent video streams without lag
• 4 SFP uplinks + Layer 3 routing for multi-site and multi-subnet deployments

Hanwha · HV-GS980M/52PS-10

Hanwha HV-GS980M/52PS-10 48-Port Managed PoE+ Switch

48-port Gigabit switch with 740W PoE+ for large camera deployments

• All 48 ports deliver simultaneous 1000 Mbps data and PoE+ power
• 4 SFP uplink ports for fiber connectivity and network redundancy
• Layer 2/3 management with VLAN, QoS, and port mirroring control

Hanwha · HV-GS980MX/10HSM

Hanwha HV-GS980MX/10HSM Mid Range Edge Switch

Robust mid-range edge switch engineered to deliver reliable network connectivity and power distribution for high-performance surveillance deployments

• Mid-range edge switch for harsh-environment surveillance
• PoE++ 802.3bt for high-power outdoor camera support
• IP66/IP67 sealed and IK10 impact-rated for industrial sites

Hanwha · HV-GS980MX/18HSM

Hanwha HV-GS980MX/18HSM L3 Stackable Switch

16-port PoE++ L3 switch with 720W budget for mid-to-large camera sites

• 16x 1/2.5/5 Gigabit PoE++ ports support high-power cameras without midspan injectors
• 720W aggregate power budget runs mixed thermal, PTZ, and standard cameras simultaneously
• Dual 10G SFP+ uplinks with Layer 3 VLAN/QoS for NVR clusters and segmentation

Hanwha · HV-GS980MX/28PSM-10

Hanwha HV-GS980MX/28PSM-10 L3 Stackable Switch

24-port PoE+ L3 switch for mid-scale surveillance deployments

• 24 Gigabit PoE+ ports with 370W budget powers cameras without injectors
• Four SFP+ uplinks prevent streaming bottlenecks across distributed sites
• Layer 3 routing with VLAN segmentation and QoS for video traffic control

Hanwha · HV-IE220-10GHX-K90

Hanwha HV-IE220-10GHX-K90 Industrial PoE++ Switch

8-port PoE++ industrial switch with 240W budget for high-power cameras

• 8 × Gigabit PoE++ ports deliver 90W each; 240W total for PTZ and multi-sensor rigs
• Dual 10G SFP+ uplinks for fiber backbone; 56 Gbps switching fabric with 2.78 µs latency
• DIN rail or wall mount aluminum enclosure rated IP30; compact 65 × 137 × 155 mm form factor

Hanwha · HV-IE220-6GHX-K90

Hanwha HV-IE220-6GHX-K90 Industrial PoE++ Switch

Industrial PoE++ switch, 180W across 4 Gigabit ports, fanless design

• 180W PoE++ power budget supports high-draw cameras on all 4 Gigabit ports
• 2x 10G SFP+ uplinks scale bandwidth for multi-camera clusters and core links
• Fanless aluminum chassis rated for extreme temperatures, DIN rail mountable

Hanwha · HV-IE340-12GP-980

Hanwha HV-IE340-12GP-980 Industrial Rugged Network Switch

Purpose-built industrial Ethernet switch designed to deliver reliable, high-performance network connectivity in harsh deployment environments where

• Industrial rugged 8-port Gigabit PoE++ switch
• 802.3bt high-power output for outdoor camera support
• Hardened design for harsh deployment environments

Hanwha · HV-IE340-20GP-980

Hanwha HV-IE340-20GP-980 Industrial rugged switch w/16xGigabit

16-port Gigabit Ethernet switch with 4x 1GB SFP uplink capacity, purpose-built for surveillance and industrial IoT deployments where standard

• 16-port Gigabit industrial managed switch with 4x SFP uplinks
• DIN-rail or wall-mount install with -40 to 75C operating range
• ONVIF and SNMP for VMS and NMS integration

Hanwha · HV-IGS950/10PS-910

Hanwha HV-IGS950/10PS-910 8-Port Gigabit PoE+ Switch

8-port Gigabit PoE+ switch with 130W budget for IP cameras

• 8 x Gigabit PoE+ ports at 30W each plus 2 SFP uplinks for fiber
• Fanless design runs silent; web-based management, no license required
• 130W total power supports 8–10 mid-range or 4–6 4K cameras

Hanwha · HV-IGS950/20PS-910

Hanwha HV-IGS950/20PS-910 16-Port Gigabit PoE+ Switch

16-port Gigabit PoE+ switch with 370W budget for surveillance

• All 16 ports deliver PoE+ power for IP cameras, intercoms, and sensors
• 370W aggregate capacity runs PTZ cameras and thermal imaging simultaneously
• Four SFP uplink ports for fiber backbone without consuming RJ-45 ports