Geovision 84-SD2200S-2012 Outdoor PoE Network Switch
Overview
The Geovision 84-SD2200S-2012 is an outdoor-rated network switch designed to deliver PoE power and data connectivity for IP-based PTZ camera systems. Built for demanding environmental conditions, this switch handles 802.3af PoE delivery at 60 Hz operation — suitable for surveillance deployments where power distribution and network connectivity must coexist in a single hardened enclosure. The outdoor rating means you can mount this switch near the camera array without requiring a separate climate-controlled cabinet, cutting installation complexity on building exteriors, parking structures, and industrial perimeters.
Compatibility
The 84-SD2200S-2012 integrates with IP-based PTZ camera systems and surveillance networks requiring standard 802.3af PoE power delivery. It is engineered to support Geovision IP PTZ camera installations and other IP-based surveillance equipment operating within 802.3af power budgets (under 13W per port). Verify your PTZ camera's power draw against the switch's per-port capacity before deployment — PTZ motors and heating elements can exceed standard PoE limits, requiring PoE+ or separate power injection if applicable.
Installation Notes
This switch operates at 60 Hz and is rated for outdoor use, meaning it tolerates direct exposure to weather. Mount in a weatherproof enclosure or use cable glands to prevent water ingress into the switch itself. Ensure adequate ventilation around the unit to avoid thermal stress in high-ambient environments. Standard Ethernet cabling (Cat5e or better) is required for all connections. Test PoE voltage and current draw before commissioning — confirm that total simultaneous power demand across all connected PTZ cameras does not exceed the switch's overall PoE budget.
