Geovision 140-APOE81W-000 8-Port PoE+ Gigabit Switch
The Geovision 140-APOE81W-000 is an 8-port managed PoE+ switch designed to deliver reliable power and network connectivity to IP-based cameras, PTZ systems, and networked security devices. With 8 ports rated at 10/100/1000 Mbps and 2 dedicated gigabit uplink ports, this switch supports both legacy and modern IP security installations. The 140-APOE81W-000 supplies PoE+ power (802.3at) across all 8 ports, enabling simultaneous operation of power-intensive devices such as IP PTZ cameras without requiring separate power infrastructure.
Overview
In security integrator deployments, network switches must balance power delivery, port density, and reliability. The Geovision 140-APOE81W-000 addresses these requirements with a fixed 8-port architecture and dual uplink capacity. The combination of PoE+ support and gigabit backhaul ensures that high-bitrate video streams from multiple cameras can be captured and transmitted simultaneously to network video recorders (NVRs) or cloud platforms without bottlenecking at the network layer.
Key Features
- 8 PoE+ Ports (802.3at): All 8 ports support PoE+ power delivery, allowing connection of power-hungry IP PTZ cameras and powered network devices without external PoE injectors.
- 2 Gigabit Uplink Ports: Dedicated gigabit connections provide high-capacity backhaul to NVRs, core switches, or network infrastructure, ensuring video stream prioritization and network isolation.
- 10/100/1000 Mbps Port Speeds: Automatic speed negotiation on all 8 ports accommodates both older 10/100 equipment and modern gigabit IP cameras.
- Compact Form Factor: Wall or rack-mount design suits both small security closets and larger security operations centers.
- Managed Switch Capabilities: Supports VLAN segmentation, QoS policies, and port mirroring for traffic analysis and diagnostic purposes.
- IP PTZ Camera Optimization: The 140-APOE81W-000 is engineered specifically for IP PTZ camera deployments, where sustained PoE+ power delivery is critical to motor-driven pan, tilt, and zoom operations.
Integration and Compatibility
The Geovision 140-APOE81W-000 operates as a standalone PoE+ switching layer between cameras and core network infrastructure. Integration is straightforward: connect cameras and powered devices to the 8 PoE+ ports and route video and control traffic to your NVR or VMS platform via one of the 2 gigabit uplink ports. The switch supports standard Ethernet cabling (Cat5e or better) and does not require special configuration for basic IP camera operations. Network administrators can use the managed interface to implement VLAN tagging, prioritize video traffic, and monitor power consumption per port—critical for troubleshooting power-delivery issues in large camera arrays.
The switch is compatible with all ONVIF-compliant IP cameras and supports legacy Geovision camera protocols, making it a reliable choice for mixed-vendor or upgrade installations.
Eden PhillipsPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
I've deployed the Geovision 140-APOE81W-000 in several mid-sized security installations, and it consistently delivers reliable PoE+ power distribution to IP PTZ camera arrays. The 8-port configuration with 2 gigabit uplinks strikes a practical balance for integrators who need to power multiple cameras without oversizing infrastructure.
Technical Highlights:
- PoE+ Power Delivery: 802.3at compliance on all 8 ports means each port can sustain 30W peak power draw—sufficient for most IP PTZ cameras with active motors and zoom lenses.
- Dual Gigabit Uplinks: The 2 dedicated 1000M ports allow you to aggregate video streams from all 8 PoE+ ports onto a single uplink path or split traffic across two separate NVR connections for redundancy.
Deployment Considerations:
- Use the switch as a dedicated PoE+ distribution layer between the edge (cameras) and core (NVR/VMS). This keeps power delivery isolated and simplifies troubleshooting when port-level power issues arise.
- Verify your cable runs are Cat5e or better and do not exceed 100 meters per port to maintain PoE+ voltage regulation under load.
- Enable port mirroring on one uplink port if you need to capture traffic for packet analysis or bandwidth monitoring during commissioning.
The 140-APOE81W-000 is well-suited for retrofit installations where existing infrastructure lacks built-in PoE+ capability. It reduces cabling complexity and centralizes power management, which simplifies future maintenance and upgrades.
