Geovision GV-POE0810 8-Port Gigabit PoE+ Switch
Overview
The Geovision GV-POE0810 is an 8-port gigabit PoE+ switch purpose-built for IP surveillance deployments and mixed networked device environments. It delivers 130W total power budget with per-port delivery up to 30W via 802.3at PoE+, eliminating the need for separate PSUs on individual cameras, access control readers, intercoms, and wireless access points. Plug-and-play operation means zero configuration—drop it into a network closet, server room, or on-site distribution point and begin powering devices immediately. The GV-POE0810 operates as a transparent Layer 2 switch with non-blocking gigabit fabric, so all eight ports maintain full 1000 Mbps throughput simultaneously without contention.
Compatibility
The GV-POE0810 works with any standard-compliant PoE+ endpoint: ONVIF-compliant IP cameras (domes, bullets, turrets), two-way intercoms, badge readers, wireless access points, and networked door locks drawing up to 30W per port. No VMS integration required—the switch functions purely as network infrastructure. Pairs naturally with network video recorders and video management systems via standard Ethernet uplinks.
Installation Notes
Mount on a wall, shelf, or 19-inch rack using the included bracket. All eight ports support auto-negotiation (10/100/1000 Mbps), so legacy and modern devices coexist without manual speed configuration. Power the switch itself via a standard 12V DC input (included power adapter). In mixed deployments where total device wattage approaches 130W, audit your endpoint power draws beforehand—if you plan eight cameras at 20W each plus two intercoms at 15W each, you'll exceed the budget and should consider a higher-capacity model or split endpoints across two switches. Operating temperature range is 0°C to 40°C; avoid installation in unheated outdoor cabinets or extreme environments.
What's in the Box
- 1x GV-POE0810 switch
- 1x 12V DC power adapter with cable
- 1x wall-mount or rack-mount bracket
- 1x set of mounting screws
