Mounting Brackets & Kits for IP Cameras

Plan Your Deployment

Wall, ceiling, pole, or corner mounting requirements
Indoor vs outdoor environmental exposure
Device model compatibility and load capacity
Vandal resistance and tamper considerations
Future service access and cable routing planning

Sub categories

Showing Results for Mounting Brackets & Kits

Compare

Out of stock
Pelco

SKU: IMV-WMJB

Pelco IMV-WMJB Weatherproof Junction Box for SRXV-WMP

IP66 sealed junction box for SRXV-WMP wall mounts outdoors
- PoE++ (802.3bt Class 4) support for high-power camera payloads
- IP66-equivalent sealed enclosure protects RJ-45 connectors from moisture
- Matched footprint eliminates adapters and custom fabrication on install
In stock · Ships same business day

$62.33 $51.99 Save $10.34
Compare

Add to Cart The item has been added
Pelco

SKU: IWM-GY

Pelco IWM-GY Wall Mount Dome Gray

Indoor wall mount bracket for Pelco dome cameras, gray finish
- Direct flush mount to walls—no adapter plate needed, cuts install labor
- Modular design accepts PA402 pole and CM400 corner adapters on-site
- IK10 vandal rating and NDAA Section 889 compliant for government use
In stock · Ships same business day

$124.00 $90.99 Save $33.01

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IWM-SR

Pelco IWM-SR Wall Mount Dome Light Gray

Wall mount for Pelco dome cameras with modular adapter support
- Direct surface mount on interior walls with light gray finish
- Compatible with PA402 pole and CM400 corner adapters for flexible positioning
- NDAA Section 889 compliant for regulated security deployments
Special Order · Ships in 2-3 weeks

$105.74 $88.99 Save $16.75

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Pelco

SKU: IWM-SW RB

Pelco IWM-SW RB Wall Mount for Sarix IE Pendant

OEM wall mount for Sarix IE large pendant cameras, light gray finish
- Surface-mount installation when ceiling mounting isn't an option
- Genuine Pelco replacement part for Sarix IE pendant bodies
- Factory-tested reboxed stock, 1-year manufacturer coverage
Special Order · Ships in 2-3 weeks

$109.07 $90.99 Save $18.08

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Pelco

SKU: IWM-SW

Pelco IWM-SW Wall Mount Dome White

Indoor white wall mount for Pelco dome cameras, accepts pole/corner adapters
- Surface wall mount with modular PA402 pole and CM400 corner adapter support
- White finish blends into office and retail interiors without visual clutter
- NDAA Section 889 compliant for government and federal procurement projects
In stock · Ships same business day

$114.00 $90.99 Save $23.01

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: IWM24-GY

Pelco IWM24-GY Indoor Wall Mount with 24V Supply

Gray indoor wall mount with integrated 24V power supply for Pelco domes
- Built-in 24V DC power eliminates separate supply units and outlet routing
- Designed for Pelco dome cameras requiring 24V input at wall locations
- Gray finish blends into commercial and industrial interior installations
Special Order · Ships in 2-3 weeks

$328.34 $273.99 Save $54.35

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: JBOX-1201

Pelco JBOX-1201 Junction Box Dual-Head Cameras

Junction box for dual-head camera cable management and termination
- Structured cable entry and routing designed for dual-head installations
- Supports multiple cable runs plus supplemental power feed connections
- Compatible with Pelco camera systems; NDAA Section 889 compliant
In stock · Ships same business day

$105.00 $87.99 Save $17.01
Compare

Add to Cart The item has been added
Pelco

SKU: KF-MAGMOUNT2

Pelco KF-MAGMOUNT2 Klick Fast Magnetic Mount

Tool-free magnetic mount for Pelco Klick Fast cameras on steel
- Snap-on attachment to ferrous metal surfaces without fasteners or tools
- Quick reposition and remove for temporary surveillance and event deployments
- Compatible with Pelco camera systems using Klick Fast interface standard
Special Order · Ships in 2-3 weeks

$60.00 $52.99 Save $7.01

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: MBXMP

Pelco MBXMP MBX Junction Box Adapter Plate

Pole and corner mount adapter for Pelco MBX junction boxes
- Connects MBX systems to pole or corner mounts beyond flat walls
- Professional-grade metal construction rated for commercial deployments
- NDAA Section 889 compliant for government and regulated projects
Special Order · Ships in 2-3 weeks

$371.20 $309.99 Save $61.21

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: MHXWBS

Pelco MHXWBS MHX NX Series Surface Wall Bracket

Direct surface wall mount for Pelco MHX, MHXT, and NX housings
- Heavy-duty industrial construction rated for concrete, masonry, and steel
- Integrated cable routing manages connections directly to camera housing
- NDAA Section 889 compliant for government and institutional deployments
Special Order · Ships in 2-3 weeks

$610.97 $509.99 Save $100.98

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: MHXWFWCA

Pelco MHXWFWCA Flush Wall Parapet Bracket

Flush wall and parapet-edge bracket for discrete MHX, MVX, NX housing mount
- Low-profile surface mount eliminates protruding hardware on walls and rooflines
- Compatible with Pelco MHX, MVX, and NX series camera housings
- Professional-grade construction, NDAA Section 889 compliant for federal projects
Special Order · Ships in 2-3 weeks

$294.54 $245.99 Save $48.55

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Pelco

SKU: MMXCWCOL

Pelco MMXCWCOL Camera Window Color Collar

Cosmetic trim ring for MMX Series cameras—blends into any interior
- Drop-in installation with no tools required; zero impact on optical performance
- Matches standard ceiling and wall colors to reduce camera visibility
- IP ratings and all camera functions remain unchanged after installation
In stock · Ships same business day

$119.60 $99.99 Save $19.61

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: MPXCOL

Pelco MPXCOL MPX Series Pole Mount Adapter

IP66 pole mount adapter for Pelco MPX Series cameras on vertical structures
- Direct MPX bracket compatibility—no alternative hardware or modifications needed
- IP66 dust-tight, spray-resistant housing for outdoor pole and mast installations
- Elevates camera placement for unobstructed line-of-sight in traffic and perimeter monitoring
In stock · Ships same business day

$437.32 $364.99 Save $72.33
Compare

Out of stock
Pelco

SKU: MPXCW

Pelco MPXCW MPX Series Corner Mount Adapter

Corner mount adapter for MPX Series housings at wall/ceiling junctions
- IP66, NEMA 4X rated for outdoor and harsh indoor environments
- Standard MPX housing interface integrates with existing Pelco camera systems
- Purpose-built for corner junction positioning to optimize field of view coverage
Special Order · Ships in 2-3 weeks

$319.00 $265.99 Save $53.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Pelco

SKU: MPXWBA

Pelco MPXWBA MPX Series Wall Mount Bracket

Direct-wall bracket for Pelco MPX housings with integrated cable routing
- IP66-rated steel construction handles concrete, masonry, and steel surfaces
- Built-in cable management routes power and data through bracket arm
- NDAA Section 889 compliant for government and critical infrastructure use
In stock · Ships same business day

$591.60 $493.99 Save $97.61

Add to Cart
The item has been added
Compare

Out of stock
Pelco

SKU: MPXWBTA

Pelco MPXWBTA Parapet/Ceiling Mount Bracket

Parapet and ceiling mount bracket for Pelco MPX Series cameras
- IP66-rated bracket withstands outdoor rain and dust exposure
- Direct MPX Series compatibility—no adapters or mounting modifications needed
- PoE+ connectivity support for power and data over single cable run
In stock · Ships same business day

$255.20 $212.99 Save $42.21

What to Look For When Buying

The decisions that matter most before you spec.

Load Rating & Vibration Damping

Mounting brackets must support camera weight (typically 0.5–15 lbs for IP cameras) plus wind load in outdoor deployments. Improperly secured cameras cause system failure during critical incidents; select brackets rated for your camera model and environmental stress factors. Gyro mounts and rubber isolators reduce vibration in high-wind or traffic-adjacent zones.

Cable Routing & PoE Management

Mounting kits with integrated cable glands and strain relief prevent cable pinch points and maintain PoE power delivery stability. Conduit clips and backing plates organize cables at the source, reducing troubleshooting time and protecting against accidental disconnection during maintenance.

Material & Corrosion Resistance

Outdoor and coastal installations require stainless steel or powder-coated aluminum brackets to prevent rust and material degradation. Salt spray, humidity, and UV exposure degrade standard steel within 6–12 months; specify 300/316 stainless for marine environments and 6063 aluminum for standard outdoor use.

Installation Standard & Brand Compatibility

Major brands like Axis, Hanwha, and Vivotek design proprietary mounting interfaces alongside VESA and ISO standard mounts. Verify bracket compatibility with your camera model before procurement; cross-brand mounts may misalign optical paths or create cable stress points.

Height, Angle & Optical Alignment

Camera mounting height and tilt affect pixel density and DORI (Detection, Observation, Recognition, Identification) distances. Adjustable brackets allow field-level fine-tuning; fixed mounts require accurate site survey and pre-deployment calculations to avoid costly repositioning after installation.

Conduit Seal & Weatherproofing

Water ingress at cable entry points causes short circuits and sensor corrosion in wet environments. Select kits with silicone gaskets, stainless steel cable glands, and IP67-rated enclosures; test seals during initial deployment to prevent mid-season failures.

Technology Stack

The specs and acronyms that actually affect mounting brackets & kits performance.

VESA Mount Standards (75/100/200 mm)

Standardized hole patterns used by consumer electronics and some IP camera models. Allows universal bracket compatibility across manufacturers, but always verify camera's screw pitch and load rating before mixing brands.

Wind Load Rating (lbs @ mph)

Manufacturers specify maximum wind speed brackets withstand without camera slip or structural flex. Outdoor installations require ratings matching local weather extremes; most outdoor brackets support 60–120 mph sustained winds, but rooftop or exposed mounting may demand 150+ mph ratings.

Stainless Steel Grades (304/316)

Grade 304 resists general corrosion in most climates; Grade 316 adds molybdenum for superior salt-spray tolerance in coastal zones. Galvanized steel (zinc coating) offers cost savings but degrades 3–5 years faster than stainless in humid/marine environments.

Cable Gland Certifications (IP67/IP68)

IP rating indicates water and dust ingress protection at cable entry. IP67 withstands temporary immersion; IP68 is rated for continuous submersion. Select IP67 minimum for outdoor camera mounts, IP68 for wet-room intercoms and dock-area access readers.

Gyro Mounts & Vibration Damping

Rubber or elastomer isolators reduce micro-vibrations transmitted from poles or wind, stabilizing video in high-motion environments. Critical for PTZ cameras on rooftop poles or traffic-adjacent installations; adds 0.5–2 lbs to mounting weight.

Conduit Diameter & Strain Relief

Brackets specify maximum conduit size (typically 0.5–1.5 inches) and cable bend radius. Exceeding bend-radius limits degrades PoE conductor insulation; use clips and backing plates to maintain manufacturer-specified minimum bend radius (usually 4–6 inches for Ethernet).

Typical Deployment Scenarios

Multi-Story Office Lobby (15 cameras, mixed mount types)

Combine ceiling-mount brackets for overview domes at entry points, corner brackets for stairwell coverage, and recessed in-wall mounts for elevator vestibules. Use Hanwha or Axis unified bracket kits to simplify procurement; junction-box assemblies pre-mount cable glands and backing plates, reducing on-site assembly by 40%.

Outdoor Parking Lot Perimeter (24 cameras, 30-ft poles)

Specify heavy-duty pole mounts rated for 80+ mph wind load, stainless steel hardware, and gyro isolation for vibration damping. Include pendant conduit kits with silicone gaskets and IP67 glands; plan cable routing inside pole conduit to protect PoE runs from weather and UV degradation.

Hospital Intercom & Card-Reader Network (40 stations, recessed mount)

Use recessed trim-ring kits designed for flush in-wall mounting at staff stations, nurse calls, and secure doors. Select 316 stainless trim rings; pair with concealed junction boxes to route cables through wall cavities, maintaining clean aesthetics while protecting core network connections from physical damage.

Warehouse Dock & Data-Capture Zone (8 cameras, industrial-grade PTZ)

Heavy-duty PTZ mounts on gantry beams require gyro dampers and reinforced backing plates rated for 20+ lbs static load. Route PoE and pan-tilt control cables through conduit; ensure sufficient power budget per PoE planning guidance for simultaneous motor operation across all units.

Frequently Asked Questions

What's the difference between VESA and proprietary camera mounts?

VESA (75/100/200 mm) are universal screw-hole patterns used by monitors and some IP cameras, allowing mixed-brand bracket compatibility. Proprietary mounts are manufacturer-specific and often integrate cable routing and power connectors for a given camera family. Always verify your camera's mounting interface before ordering; mixing standards can misalign the lens or create cable stress.

How do I choose between wall, pole, and ceiling mounting?

Wall mounts suit indoor hallways and perimeter coverage; ceiling mounts provide overhead overview angles; pole mounts enable tall outdoor installations for parking lots and large perimeters. Consider viewing angle (DORI distance), cable routing (PoE run length), and environmental exposure (rain, wind, UV). Outdoor deployments typically require pole or soffit brackets with stainless hardware and weatherproof conduit seals.

What wind-load rating do I need for rooftop or pole-mounted cameras?

Most outdoor brackets are rated 60–80 mph; rooftop and tall-pole installations in high-wind zones (hurricane, mountain, or exposed coastal areas) require 100–150+ mph ratings. Consult local building codes and weather records for your site. Undersized brackets allow camera drift, misaligning views and degrading identification accuracy over distance.

Why should I use stainless steel brackets in coastal or humid climates?

Standard steel and galvanized coatings corrode within 2–5 years in salt-spray or high-humidity zones, causing bracket failure and camera drop hazards. Stainless 304 resists general corrosion; 316-grade adds molybdenum for superior marine tolerance. The upfront cost (typically 20–40% more) prevents emergency replacement and liability exposure.

What's an IP67 cable gland, and why does it matter for outdoor mounts?

IP67 means the gland prevents dust and temporary water submersion at cable entry points. Water ingress corrodes connectors and shorts PoE circuits, causing mid-deployment failures. Pair IP67 glands with silicone gaskets and stainless fasteners; test seals before final installation to confirm weatherproofing.

Can I use the same mounting bracket for different camera brands?

Only if both cameras share VESA or ISO mounting standards. Proprietary mounts (common in Axis, Vivotek, and Hanwha models) are not interchangeable. Mixing brands often requires adapter plates, which add bulk, cost, and potential optical misalignment. Standardize on one or two manufacturer families per project to simplify spare-parts inventory and on-site troubleshooting.

Mounting Brackets & Kits

Plan Your Deployment

Sub categories

Showing Results for Mounting Brackets & Kits

Pelco IMV-WMJB Weatherproof Junction Box for SRXV-WMP

Pelco IWM-GY Wall Mount Dome Gray

Pelco IWM-SR Wall Mount Dome Light Gray

Pelco IWM-SW RB Wall Mount for Sarix IE Pendant

Pelco IWM-SW Wall Mount Dome White

Pelco IWM24-GY Indoor Wall Mount with 24V Supply

Pelco JBOX-1201 Junction Box Dual-Head Cameras

Pelco KF-MAGMOUNT2 Klick Fast Magnetic Mount

Pelco MBXMP MBX Junction Box Adapter Plate

Pelco MHXWBS MHX NX Series Surface Wall Bracket

Pelco MHXWFWCA Flush Wall Parapet Bracket

Pelco MMXCWCOL Camera Window Color Collar

Pelco MPXCOL MPX Series Pole Mount Adapter

Pelco MPXCW MPX Series Corner Mount Adapter

Pelco MPXWBA MPX Series Wall Mount Bracket

Pelco MPXWBTA Parapet/Ceiling Mount Bracket

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Mounting Brackets & Kits

Frequently Asked Questions

Related Categories

Engineering Reading