Hanwha SBP-301HM5 Ivory Hanging Mount

The SBP-301HM5 is an aluminum hanging mount engineered for Hanwha IP surveillance cameras. If your deployment requires ceiling or soffit mounting—retail ceilings, warehouse overheads, parking structures, building soffits—this accessory provides a secure, repeatable solution. The ivory finish blends into light-colored ceilings while the compact form factor keeps visual clutter minimal.

Key Features

• Aircraft-grade aluminum construction: Resists corrosion and maintains structural integrity across extreme temperature swings. Eliminates rust concerns in humid or salt-air environments, directly reducing maintenance overhead over a 3–5 year deployment.
• 1.5" NPT pipe thread connection: Integrates with standard commercial mounting infrastructure (drop-ceiling T-bars, soffit conduit, rigid supports). No proprietary adapters required—use off-the-shelf pipe fittings and couplings from any electrical distributor.
• Compact footprint (Ø144.0 × 51.0mm / Ø5.67" × 2.01"): Minimal visual impact in open-plan retail or corporate spaces. The small profile reduces glare reflection and doesn't obstruct sprinkler coverage or HVAC diffusers.
• Lightweight design (197g / 0.43 lb): Reduces stress on ceiling hardware and simplifies one-person installation. No heavy lifting or additional reinforcement brackets needed for standard camera weights in the Hanwha lineup.
• Operating temperature range: -50°C to 60°C (-58°F to 140°F): Handles freezing outdoor loading docks, unheated parking structures, and hot roof-mounted applications without material degradation or dimensional drift.
• 100% humidity tolerance: Deploy in high-moisture environments—car washes, greenhouse perimeters, humid warehouse zones—without condensation-related failures or coating breakdown.

Deployment Applications

Ideal for ceiling-mounted installations in retail spaces, office buildings, warehouses, and exterior perimeters. The mount accommodates both covered (drop-ceiling, soffit) and fully exposed (outdoor overhangs, loading docks) deployments. Standard 1.5" NPT threading means you can source threaded riser pipe, swivel adapters, or fixed standoffs from any commercial electrical supply without waiting for proprietary parts.

Integration with Hanwha Cameras

The SBP-301HM5 (often searched as SBP 301HM5) integrates with Hanwha's IP camera portfolio. Verify the specific camera's mounting interface and weight rating against the camera datasheet before final assembly; the mount itself is rated for typical Hanwha dome and compact turret weights.

When to Choose a Different Mount

If your deployment requires wall-bracket mounting, pole mounting, or an articulated arm for extreme angle adjustments, evaluate wall-mount or pole-mount variants in the Hanwha accessory family. If aesthetics demand a low-profile flush mount, consider recessed ceiling options instead. The SBP-301HM5 is optimized for hanging/pendant installations only.

Installation Considerations

Ensure the ceiling support structure (T-bar, joist, or soffit frame) can handle the combined weight of the mount and camera. Use lock-washers or thread-locking compound on the NPT connection to prevent vibration loosening. In vibration-prone environments (near HVAC, loading dock bay doors), inspect the connection quarterly. The ivory finish may show dust accumulation in very dusty warehouses—plan occasional cleaning if appearance is critical for customer-facing areas.

Frequently Asked Questions

Q: Does the SBP-301HM5 work with non-Hanwha cameras?

A: The mount's 1.5" NPT thread is a standard connection. Compatibility depends on the camera's mounting interface; if the camera uses a compatible mounting plate or bracket, it may work. However, we recommend verifying with the camera manufacturer and testing before full deployment.

Q: Can I use the SBP-301HM5 indoors and outdoors?

A: Yes. The aluminum construction and 100% humidity rating support both covered indoor ceilings and fully exposed outdoor installations. The operating temperature range (-50°C to 60°C) covers freezing and high-heat environments.

Q: What's the maximum camera weight this mount supports?

A: Weight capacity depends on the structural support above the mount (ceiling, joist, or soffit frame) and the NPT connection strength. Refer to the specific camera's weight in the camera datasheet and confirm the overhead support can handle the combined load. The mount itself is aluminum and lightweight, so the limiting factor is typically the ceiling structure.

Q: Is the finish durable outdoors?

A: The aircraft-grade aluminum resists corrosion, and the ivory finish is designed for outdoor exposure. In salt-air or highly corrosive industrial environments, inspect periodically for coating wear. For extreme salt-spray zones, consider a supplemental protective coating or stainless-steel alternatives if available in the Hanwha accessory line.

Q: How do I connect the mount to my ceiling?

A: The 1.5" NPT thread is the camera connection point. You attach the mount to your ceiling using standard 1.5" NPT riser pipe, threaded adapters, or NPT-to-bracket fittings available from any electrical or plumbing supplier. Ensure the overhead structure is properly rated for the load.

Ted Perry

Perspective based on aggregated and affiliated engineering team experience.

The SBP-301HM5 solves a real problem on ceiling-mount jobs: it's a standard 1.5" NPT hanging mount that doesn't require you to source custom risers or worry about proprietary threads. Aircraft-grade aluminum means zero corrosion headaches in humid warehouses or outdoor loading docks where cheaper steel brackets rust in months. Install one of these, wire your camera, and you're done—no surprises.

Technical Highlights:

• 1.5" NPT threading: Standard commercial plumbing/electrical fittings work directly. Your supplier stocks these off-the-shelf; no waiting for backordered Hanwha-specific adapters. Swap riser pipes, use swivel couplings, or thread it into a conduit hub without fabrication.
• Aircraft-grade aluminum + ivory finish: Holds up to -50°C freeze cycles and 100% humidity without dimensional drift or coating failure. Outdoor loading docks and unheated parking structures won't corrode this mount in 3–5 years like cheaper alternatives do.
• Lightweight at 197g (0.43 lb): One person installs this. No reinforcement brackets, no joist-beefing, no second pair of hands. Reduces labor cost and installation risk on high ceilings.

Deployment Considerations:

• Verify the overhead structure (T-bar, joist, soffit frame) can handle the combined weight of mount + camera. Aluminum is strong, but the ceiling support is the limit, not the mount itself.
• In vibration-prone environments (loading dock bay doors, HVAC near the mount), use thread-locking compound on the NPT connection. Vibration can loosen standard pipe threads over months without it.

Deploy the SBP-301HM5 on retail ceilings, warehouse overheads, and parking structure soffits where you want reliable, corrosion-proof hanging support without custom sourcing. If you need wall-bracket or pole-mount solutions, that's a different accessory conversation; this one is optimized for pendant/hanging only.