Hanwha SBP-276HM Hanging Mount for Multisensor Cameras
Overview
The Hanwha SBP-276HM is an aluminum hanging mount designed to pendant-install the PNM-9000VQ multisensor camera family from ceiling structures. If you're deploying Hanwha Vision multisensor cameras in atriums, warehouses, or open-floor retail environments where ceiling-drop positioning is the only way to achieve full 360° scene coverage without a column or wall nearby, the SBP-276HM is the bracket that bridges camera to pendant adapter. It ships in ivory — matching the standard housing color of the PNM series — so the installation doesn't look field-improvised. The SBP-276HM (often searched as SBP 276HM) pairs with the SBP-300 pendant adapter family to complete the drop-mount assembly.
Key Features
- Aluminum construction: Aluminum resists corrosion better than stamped steel in climate-controlled indoor environments and keeps the assembly light enough to avoid overloading standard suspended-ceiling anchors. For a camera mounting accessory supporting a multi-sensor housing, material rigidity matters — vibration from HVAC or foot traffic on upper floors can shift aim on a flimsy bracket over time.
- Ivory finish: Matched to the PNM-9000VQ housing color, so ceiling drops in public-facing spaces — lobbies, retail floors, airport concourses — don't draw unnecessary attention to the security infrastructure.
- Designed for the PNM-9000VQ ecosystem: The SBP-276HM is specifically listed as compatible with the PNM-9000VQ multisensor camera, which means mounting geometry, weight load, and cable routing are engineered for that platform — not a generic VESA-style bracket adapted to fit. That precision matters when you're hanging a multi-pound panoramic housing from a finished ceiling 20 feet up.
- SBP-300 adapter compatibility: The mount interfaces with the SBP-300WM1, SBP-300WM, SBP-300CM, and SBP-300LM pendant adapters — giving you flexibility to configure for wall-extension pendants, ceiling pendants, or conduit drops depending on the structural anchor available at the install site. Review your camera installation planning to confirm which SBP-300 variant suits your ceiling type before ordering.
Integration & Compatibility
The SBP-276HM is confirmed compatible with the following Hanwha Vision components:
- Camera: PNM-9000VQ multisensor panoramic camera
- Pendant adapters: SBP-300WM1, SBP-300WM, SBP-300CM, SBP-300LM
This bracket is not a universal mount. If your camera model is not the PNM-9000VQ, verify compatibility against the specific camera's mounting accessory list before purchasing. Hanwha's mounting ecosystem uses model-specific geometry; cross-family substitution frequently results in misaligned cable entries or unsupported load ratings.
Frequently Asked Questions
Q: Which cameras is the SBP-276HM compatible with?
A: The SBP-276HM is designed for use with the Hanwha PNM-9000VQ multisensor camera. It is not listed as a universal mount for other Hanwha camera families.
Q: Which pendant adapters work with the SBP-276HM?
A: The SBP-276HM is compatible with the SBP-300WM1, SBP-300WM, SBP-300CM, and SBP-300LM pendant adapters from Hanwha Vision.
Q: What material is the SBP-276HM made from?
A: The SBP-276HM is constructed from aluminum, providing a corrosion-resistant, lightweight mount suitable for indoor pendant installations.
Q: What color is the SBP-276HM?
A: Ivory — matched to the standard housing color of the PNM-9000VQ to maintain a consistent appearance on finished ceilings.
Q: Can I use the SBP-276HM without a pendant adapter?
A: The SBP-276HM is designed to work in conjunction with the SBP-300 series pendant adapters to complete the hanging mount assembly. Use without the appropriate adapter is not documented by the manufacturer and is not recommended.
The SBP-276HM is a purpose-built aluminum hanging mount for the PNM-9000VQ — and that specificity is exactly why it belongs on your BOM rather than a field-improvised drop bracket. When you're suspending a multisensor panoramic housing from a 20-foot atrium ceiling, the geometry of the cable entry, the load path through the bracket, and the interface with the SBP-300 pendant adapter all have to line up correctly. Generic brackets introduce misalignment at every joint.
Technical Highlights:
- Aluminum body: Keeps the hanging assembly corrosion-resistant and dimensionally stable in conditioned indoor environments — important for a bracket that's essentially inaccessible once the ceiling tile goes back in.
- Ivory finish: Color-matched to the PNM-9000VQ housing, so a pendant drop in a finished lobby or retail floor doesn't look like a field modification.
- SBP-300 series interface: Compatible with four SBP-300 adapter variants (WM1, WM, CM, LM), giving the installing technician options to match the structural anchor type — ceiling direct, wall extension, or conduit — without swapping the camera-side bracket.
Deployment Considerations:
- Confirm your pendant adapter selection (SBP-300WM1, WM, CM, or LM) before the site walk — the adapter drives the rough-in conduit path, not the SBP-276HM itself. Ordering the wrong adapter after cable is pulled is an avoidable delay.
- No IP or IK rating data is published for this bracket, which signals it is designed for indoor conditioned environments only. Do not specify it for covered-outdoor or exposed applications without manufacturer confirmation.
The SBP-276HM is the right spec for open-ceiling or atrium deployments of the PNM-9000VQ where a pendant drop is the only mounting geometry that delivers unobstructed 360° coverage — high-bay warehouses, airport terminals, and large retail floors with no suitable wall or column within camera range.
