Hanwha SBP-200C Mounting Hole Cover Mount Plate
The Hanwha SBP-200C is a polycarbonate mounting hole cover plate designed to finish wall and pole-mounted camera installations where multiple fastening points exist but only a subset are actively used. Supplied as a pack of 5 units, this accessory eliminates the visual clutter of exposed holes and weathered fasteners — a common finishing detail overlooked in field deployments but immediately visible in retail, corporate, educational, and outdoor security installations.
Key Features
- Polycarbonate Construction (Weather-Resistant): Polycarbonate material resists UV degradation and moisture intrusion — significant for outdoor mounts exposed to direct sunlight and rain, where cheaper plastic covers become brittle and fail within 2–3 years. Typical field life in temperate climates exceeds 5 years before noticeable yellowing occurs.
- Circular Profile (ø211 mm / 8.31 inches): Fits standard Hanwha wall and pole mount hole patterns. The diameter accommodates typical unused fastener holes without requiring custom trimming or field modification — labor savings on every installation.
- White Finish (RAL 9003): Neutral white blends into most building surfaces and architectural backdrops. Critical for retail and corporate environments where visible mounting hardware and exposed fasteners signal incomplete or amateur installation quality.
- Lightweight (87 grams per unit / 0.19 lbs): Minimal mass places no additional structural load on mount brackets or wall anchors. Installation is simple fastening; no supplemental load analysis required.
- Pack Quantity (5 units): Covers a typical small-to-medium multi-camera rollout. Reduces repeat SKU orders for single-unit field replacements or additions later.
- Hanwha Mount Ecosystem Compatibility: Confirmed compatibility with SBP-250WMW and SBP-400WMW wall and pole mounts reduces inventory fragmentation if your organization standardizes on Hanwha mounting hardware across multiple sites.
Integration & Compatibility
The SBP-200C integrates directly with Hanwha wall and pole mount platforms. Confirmed compatible models include:
- SBP-250WMW Wall & Pole Mount
- SBP-400WMW Outdoor Wall & Pole Mount
The cover plate fits standard hole spacing on these mounts. If deploying Hanwha IP cameras across multiple locations with standardized mounting infrastructure, verify hole pattern and spacing against your chosen mount before bulk ordering — field variations occasionally occur even within the same mount family designation.
Why Finishing Hardware Matters in the Field
Exposed mounting holes create two practical problems: (1) visual untidiness that degrades perceived installation quality in customer-facing areas, and (2) potential water intrusion pathways into the mount structure or behind the camera enclosure. The SBP-200C eliminates both issues with a snap-on closure. When planning camera deployments and mount selection, accounting for finishing hardware early prevents costly aesthetic remediation callbacks or warranty service visits later.
When to Skip This Accessory
For indoor-only, low-visibility installations (mechanical rooms, back-of-house spaces, or interior warehouses), exposed fastener holes are typically acceptable and the SBP-200C cost can be eliminated entirely. If your mount uses recessed or non-standard hole patterns not matching the ø211 mm profile, or if you require custom cutouts for cable pass-throughs, confirm fit against your specific hardware before committing to the purchase.
Frequently Asked Questions
Q: What is the outer diameter and thickness of the SBP-200C?
A: The SBP-200C has an outer diameter of ø211 mm (8.31 inches) and a thickness of approximately 10 mm (0.39 inches).
Q: Is the SBP-200C UV-stable for long-term outdoor exposure?
A: Yes. The polycarbonate construction includes weather-resistant properties; extended direct UV exposure (10+ years in full sun) may cause slight yellowing or brittleness, but in most temperate-climate outdoor installations, field life exceeds five years without noticeable performance degradation.
Q: How many units are in each package?
A: The SBP-200C is supplied as a pack of 5 units, suitable for covering unused fastener holes across a typical small-to-medium installation.
Q: Does the SBP-200C fit non-Hanwha mounts?
A: The SBP-200C is designed and verified for Hanwha SBP-250WMW and SBP-400WMW mounts. Use on non-Hanwha mounts requires verification of hole pattern diameter and spacing alignment; contact the mount manufacturer or test fit before field deployment.
Q: What is the weight per unit?
A: Each cover plate weighs 87 grams (0.19 lbs), placing negligible structural load on the mounting bracket.
Q: Can the SBP-200C be installed without special tools?
A: Installation requires only standard fasteners (screws) to mount the plate over unused holes on the bracket. No specialized tools or training required.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The SBP-200C is a finishing detail that separates professional installations from rushed field work. At ø211 mm and 87 grams, this polycarbonate plate closes the visual gap left by multi-point mounting hardware — a small cost that eliminates customer callbacks about exposed fasteners and water intrusion risk.
Technical Highlights:
- Polycarbonate Weather Resistance: UV-stabilized plastic holds up 5+ years in typical outdoor climates before yellowing; cheaper alternatives become brittle and crack within 2–3 years, forcing field replacement.
- ø211 mm Diameter Profile: Matches Hanwha SBP-250WMW and SBP-400WMW hole spacing. Eliminates custom fabrication labor — fasteners align, installation is fastening only.
- Neutral RAL 9003 White: Blends seamlessly into retail and corporate backdrops. Visible mounting hardware signals incomplete work; this plate signifies finished, professional quality.
- Pack of 5 Units: Covers typical small deployments (3–5 camera locations with multiple unused holes each). Reduces repeat ordering friction.
Deployment Considerations:
- Verify hole pattern diameter and spacing against your specific Hanwha mount before bulk ordering — field variations exist even within the same mount family.
- Skip this accessory for back-of-house or fully concealed installations where exposed fasteners pose no aesthetic or moisture-ingress risk. Unnecessary cost in mechanical rooms or warehouse interiors.
The SBP-200C justifies itself in customer-facing retail, corporate, and educational deployments where mounting hardware visibility detracts from brand appearance or signals incomplete installation quality. For standardized Hanwha mount ecosystems, it's a zero-friction finishing component that avoids last-minute aesthetic remediation costs.
