Hanwha SBP-215C Mounting Hole Cover Plate Pack
The SBP-215C is a finishing accessory designed to conceal fastener holes and mounting points on Hanwha multi-directional dome camera installations. This 5-pack contains polycarbonate cover plates finished in RAL 9003 white — a neutral, standardized European color that blends seamlessly with typical suspended ceiling tiles and wall surfaces without requiring custom paint or finishing work. The plates are purpose-built to work with Hanwha's SBP-250WMW and SBP-400WMW mounting bracket systems.
Key Features
- Pack Quantity & Material: 5 polycarbonate plates per pack. Polycarbonate is lightweight and inherently resistant to humidity and mild temperature swings — meaning the plates won't degrade if exposed during installation or in semi-outdoor mounting scenarios, a practical consideration for integrators who work in varied climate conditions.
- Finish: RAL 9003 white is a standardized European color specification that ensures consistent appearance across multiple installations and locations. This eliminates color drift from project to project and creates a cohesive look without custom paint orders or site-specific modifications.
- Dimensions: 225.66 mm wide × 145.66 mm deep × 10 mm thick (approximately 8.88" × 5.74" × 0.39"). This footprint is sized to cover the bolt holes and anchor points on compatible bracket systems without overhanging the dome camera housing — no trimming or field modification required.
- Weight per Plate: 65g (approximately 2.3 oz). The light weight eliminates any added structural load on ceiling anchors or wall mounts and simplifies handling during installation — a technician can position and secure plates one-handed without fatigue or the need for assistance.
- Bracket Compatibility: Designed for Hanwha SBP-250WMW and SBP-400WMW mounting brackets. These are the standard drop-ceiling and wall-mount bracket systems used across Hanwha's multi-directional dome camera line, covering the PNM-7082RVD (2MP dual-sensor), PNM-12082RVD (6MP dual-sensor), PNM-C7083RVD (2MP AI dual-sensor), and PNM-C12083RVD (6MP AI dual-sensor) models.
- Installation Method: Plates snap or adhesively secure over fastener holes. No tools, calibration, or configuration required — this is passive hardware that improves the finished appearance of the installation without affecting camera function, alignment, or electrical performance.
Deployment Context
The SBP-215C is mandatory in customer-facing or executive-visibility environments where the security installation is part of the visual landscape. Retail chains, hotels, corporate lobbies, and hospitality venues expect professional, finished-looking installations that don't broadcast raw fastener holes and anchor points. In contrast, warehouse, back-office, or industrial environments where aesthetics are less critical may not justify the cost per unit.
Consider the SBP-215C part of the scope if the project includes visible ceiling or wall mounting and the end user (or their design consultant) will inspect the installation as part of the acceptance process. The plates are a low-cost way to avoid rework requests or change orders triggered by visible fasteners.
Frequently Asked Questions
Q: Do the cover plates stay in place without adhesive?
A: The plates are designed to snap into position over the mounting holes on the SBP-250WMW and SBP-400WMW bracket systems. Adhesive is optional but recommended for installations subject to vibration, HVAC air movement, or frequent maintenance access. Consult the bracket manual for specific attachment guidance.
Q: Can I paint or customize the color of the SBP-215C plates?
A: Yes. Polycarbonate accepts most acrylic and polyurethane paints. If you need a color other than RAL 9003 white, paint can be applied in the workshop before installation, or on-site after mounting. Test on a single plate first to confirm adhesion and finish quality.
Q: What is the difference between SBP-215C and other Hanwha cover plate options?
A: The SBP-215C is specifically sized and engineered for the SBP-250WMW and SBP-400WMW bracket line. Other Hanwha mounting accessory SKUs are designed for different bracket systems or camera form factors. Confirm the bracket model before ordering to ensure fit.
Q: Is adhesive included in the pack?
A: No. The SBP-215C pack contains 5 plates only. Adhesive (if desired) must be sourced separately. Snap-fit installation using the bracket's integral mounting points does not require adhesive for most static ceiling or wall installations.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The SBP-215C is a straightforward but genuinely useful finishing piece that gets overlooked in tighter budgets. At 65g per plate, the polycarbonate construction is light enough that ceiling anchors don't strain, yet durable enough to handle the mechanical stress of installation and removal without cracking. The RAL 9003 white specification eliminates color-matching headaches — it's a European industrial standard, so you know exactly what you're installing across a multi-location chain without hunting for exact paint codes.
Technical Highlights:
- 225.66 mm × 145.66 mm footprint: Sized specifically for SBP-250WMW and SBP-400WMW bracket hole patterns. No field trimming, no guessing — it drops into position and either snaps or adhesively mounts without modification.
- Polycarbonate durability: Resists humidity and moderate temperature swings without warping or yellowing. In semi-outdoor or humid HVAC-driven environments (think hospitality ceilings), the material won't degrade like thin ABS plastic would.
- 5 plates per pack: Covers one multi-sensor dome installation (most Hanwha multi-directional domes require 2–3 plates per bracket) or allows for spares. Good for integrators stocking emergency replacements.
Deployment Considerations:
- Snap-fit without adhesive is the baseline, but in high-vibration HVAC zones or areas with significant air movement, adhesive is recommended. Field crews often skip this step — worth calling out in the scope of work.
- Paint compatibility is real, but test a single plate with your chosen acrylic or polyurethane first. Polycarbonate is forgiving, but cheap paints can peel or not cure properly on plastic.
Deploy the SBP-215C in any retail, hospitality, or corporate environment where the security installation is visible to customers or executives. Warehouse and back-office work? You can live without it unless the end-user's design standards explicitly require finished hardware. For integrators working high-touch retail or hotel chains, this is a standard line item — margins are thin, but omitting it triggers rework.
