Hanwha SBP-300WMW Gooseneck Wall Mount
The Hanwha SBP-300WMW is a gooseneck wall mount built specifically for installations requiring flexible camera positioning on white-painted walls or in environments where color matching matters. Its aluminum and SECC steel construction delivers durability without excess weight — the mount tips the scales at just 1.87 lbs, making it practical for single-technician installations while remaining rigid enough to support camera equipment without sag or drift over time.
Key Features
- Gooseneck design for positioning control: The articulated neck allows you to adjust camera angle and orientation without removing the mount from the wall — valuable in retrofit situations where you need to fine-tune coverage after initial installation without climbing back up to repositioning hardware.
- 1.5" PF (pipe) thread connection: Standard industrial thread format ensures compatibility across a broad range of Hanwha pole-mount and wall-mount cameras in the Hanwha IP camera catalog. PF threading is non-metric, so verify your camera's connection thread before ordering if integrating with equipment from other vendors.
- Compact footprint (4.41" × 7.2" × 10.89"): The mount occupies minimal wall real estate — an asset in tight corridors, retail spaces, or high-traffic areas where protruding hardware poses a strike or snag hazard. Measure your wall cavity before installation to confirm adequate clearance behind the gooseneck.
- White finish for visual integration: Matches Hanwha's white camera housings and mounts (SBP-300PMW, SBP-300KMW, SBP-300WB, SBP-300NBW compatible models), reducing contrast and making the camera assembly less conspicuous in light-colored environments — helpful in retail or office settings where camera presence should blend with décor.
- Aluminum and SECC steel construction: Aluminum provides corrosion resistance and lightweight handling; SECC (cold-rolled steel with electrolytic chromium coating) adds rigidity. The combination resists rust in moderate environmental stress, though full stainless steel would be required for salt-air or high-humidity coastal installations.
- NDAA compliance: Meets Section 889 restrictions on certain telecommunications equipment sourcing — critical for federal, state, and municipal procurement, as well as critical infrastructure projects with NDAA mandates.
- 3-year manufacturer warranty: Covers defects in material and workmanship, providing recourse if mounting hardware fails prematurely. Warranty does not cover installation damage, environmental degradation, or camera-related failures — only the mount itself.
Integration & Compatibility
The SBP-300WMW pairs with Hanwha white-finish camera models including SBP-300PMW, SBP-300KMW, SBP-300WB, and SBP-300NBW. Confirm your camera's thread size and finish before ordering. The mount is suitable for indoor and outdoor environments, though in heavy rain or salt spray, periodic maintenance (cleaning and light corrosion inhibitor) extends service life. This accessory is often searched as SBP 300WMW or SBP-300WMW mount.
When to Choose a Different Model
If your installation requires stainless steel construction (coastal, high-humidity, or washdown environments), contact your integrator about alternative stainless-steel mounting solutions. If you need a black or neutral-finish mount to match dark or metal-toned camera housings, look for Hanwha's dark-finish mount variants. If your camera uses a different thread format (M18, M20, or metric pipe threads), this model will not fit — verify thread compatibility before purchase.
Frequently Asked Questions
Q: Is the SBP-300WMW compatible with all Hanwha IP cameras?
A: No. The SBP-300WMW is designed for white Hanwha cameras with 1.5" PF thread connections. Specific compatible models include SBP-300PMW, SBP-300KMW, SBP-300WB, and SBP-300NBW. Always verify your camera's thread size and connection format before ordering.
Q: Can I use the SBP-300WMW outdoors?
A: Yes, the mount is suitable for outdoor use. However, in coastal or high-humidity environments with salt spray or corrosive air, the aluminum and SECC construction may require periodic maintenance (gentle cleaning and corrosion inhibitor) to prevent rust. For extreme salt-air applications, stainless-steel mounts are recommended.
Q: What is the weight capacity of the SBP-300WMW?
A: The mount itself weighs 1.87 lbs and is engineered to support standard Hanwha white-finish IP cameras. Check your specific camera's weight and confirm with your integrator that combined weight is within safe load limits for your wall substrate and fastening method.
Q: Is the SBP-300WMW NDAA compliant?
A: Yes, the SBP-300WMW is NDAA Section 889 compliant, making it suitable for federal, state, municipal, and critical infrastructure installations with NDAA procurement mandates.
Q: What warranty does the SBP-300WMW include?
A: The mount includes a 3-year manufacturer warranty covering defects in materials and workmanship. Warranty does not cover installation damage, misuse, or camera-related failures.
Q: Can I adjust the camera angle after installation?
A: Yes. The gooseneck design allows you to adjust camera angle and orientation without removing the mount from the wall — ideal for fine-tuning coverage after initial deployment.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The Hanwha SBP-300WMW fills a practical gap in white-finish surveillance deployments where you need positional flexibility without committing to a pan-tilt head or motorized gimbal. At 1.87 lbs and 10.89 inches deep, this gooseneck mount slides into wall-mounted installs where space is tight and color-matched aesthetics matter — retail, hospitality, or corporate offices where a black or bulky mount would stand out.
Technical Highlights:
- 1.5" PF thread: Industrial standard ensures reliable mechanical connection across Hanwha's white camera line (SBP-300PMW, SBP-300KMW, SBP-300WB, SBP-300NBW). Verify your camera's thread before ordering; metric or M-series threads won't thread correctly.
- Aluminum + SECC construction: Delivers corrosion resistance adequate for indoor and moderate outdoor use. Plan for annual maintenance (light cleaning and protective spray) in humid climates. Not suitable for salt-spray environments without upgrade to stainless steel.
- Gooseneck articulation: Allows post-installation angle adjustment without wall re-entry. Valuable in retrofit scenarios or when final camera positioning must wait for furniture/finishes to settle — saves a second service call.
- NDAA Section 889 compliance: Mandatory for federal and critical infrastructure work; confirms material sourcing and supply-chain vetting meet government procurement rules.
Deployment Considerations:
- Confirm your wall substrate (drywall, plaster, concrete, tile) and fastening method before installation. The mount's weight is light, but load-bearing depends on anchor quality — use toggle bolts or concrete anchors rated for your wall type and combined camera weight.
- Watch for thread compatibility. The 1.5" PF connection is specific to this Hanwha white mount family. If integrating with cameras from other vendors or older Hanwha models, verify thread format. A mismatched thread will strip or simply not engage.
- In outdoor or high-humidity installs, corrosion creep is the real risk. Aluminum resists oxidation better than bare steel, but SECC coating will eventually weather. Treat this mount as semi-rugged, not weatherproof. Salt-air or washdown environments require stainless upgrade.
This mount is the right choice for retail, office, or hospitality surveillance where white finish and discreet mounting matter, and where you can tolerate periodic maintenance. It's not suitable for rough outdoor or industrial washdown scenarios — those demand stainless or powder-coated housings.
