Hanwha SBP-300HMW5 White Hanging Mount

The Hanwha SBP-300HMW5 is a precision-engineered hanging mount for ceiling and overhead camera installations in surveillance systems. Built from lightweight aluminum, this accessory delivers reliable support while maintaining a clean aesthetic across indoor and outdoor environments. The 1.5" PF (pipe fitting) thread connection integrates with standard mounting hardware, making it compatible with a wide range of Hanwha camera models and third-party surveillance equipment that use the same thread specification.

Key Features

• Aluminum Construction: Resists corrosion and oxidation in both indoor and outdoor conditions—critical for ceiling mounts where replacement is disruptive and costly. Lightweight enough (200g / 0.44 lb) that one person can position and secure it without needing a second pair of hands during installation.
• 1-1/2" PF Thread Connection: Standard pipe fitting thread ensures broad compatibility with Hanwha cameras and other ONVIF-compliant dome and turret models that use this mounting interface. No adapter plates or custom hardware required for drop-in installation.
• White/Ivory Finish: Blends seamlessly with suspended ceilings, acoustic tiles, and standard white drywall—a practical choice when visible mounting infrastructure must remain visually neutral across offices, retail, educational facilities, and public areas.
• Compact Footprint: Diameter 154.8mm (6.09 inches) with a height of 47.0mm (1.85 inches) keeps the visible profile minimal. Useful in spaces where design aesthetics matter or where ceiling-mounted equipment cannot dominate the visual field.
• Low Weight Simplifies Installation: At 200 grams, the mount adds negligible load to ceiling anchors, meaning standard threaded rod or pendant hardware can support it without reinforcement. Reduces installation time and material cost compared to heavier alternatives.

Integration & Compatibility

The SBP-300HMW5 integrates with Hanwha IP cameras and compatible third-party surveillance equipment that feature a 1-1/2" PF thread socket. Verify that your selected camera model has this mounting interface before ordering. The mount is designed for overhead/ceiling installation only—wall mounting requires a different bracket. When ordering, confirm the camera's weight specification to ensure your ceiling anchor hardware (threaded rod, rod hangers, or drop-ceiling supports) can safely support the combined load of the mount and camera.

What's in the Box

The SBP-300HMW5 ships as a standalone mounting bracket. No additional hardware, fasteners, or mounting template are included. You will need to provide or source ceiling anchors, threaded rod, and any washers or lock nuts appropriate to your ceiling structure and local building code.

Frequently Asked Questions

Q: Can I use the SBP-300HMW5 on a drywall ceiling without reinforcement?

A: No. The SBP-300HMW5 is designed for installation into structural elements (threaded rod anchored to building framing or suspended ceiling supports). Drywall alone cannot support the combined load of the mount and camera. Consult a building contractor or integrator to ensure proper ceiling anchor selection for your installation environment.

Q: What camera models work with the SBP-300HMW5?

A: The mount is compatible with any Hanwha camera featuring a 1-1/2" PF thread socket, as well as third-party surveillance cameras with the same thread specification. Check your camera's product manual or specification sheet for the mounting thread type before ordering.

Q: Is the white finish UV-resistant?

A: The aluminum construction resists corrosion, but direct UV exposure over extended periods may cause minor finish degradation. For fully outdoor installations with prolonged direct sunlight, consider protective coatings or shaded mounting locations.

Q: How much weight can the SBP-300HMW5 support?

A: The mount itself is lightweight (200g), but the weight limit depends entirely on your ceiling anchor hardware (threaded rod gauge, anchor type, and building structure). Work with a systems integrator or structural engineer to specify anchors rated for your camera weight plus the mount weight.

Q: Do I need any additional tools or fasteners?

A: Yes. You will need ceiling anchors, threaded rod, and standard fasteners (washers, nuts) appropriate to your ceiling type and local building code. These are not included with the mount.

Ted Perry

Perspective based on aggregated and affiliated engineering team experience.

The SBP-300HMW5 is a straightforward pendant mount that does one job: hold a camera steady from overhead with minimal visual footprint. At 200 grams, it's light enough that you won't over-engineer your ceiling hardware, but the 1.5" PF thread is the key compatibility spec—verify your camera has it before you buy.

Technical Highlights:

• 1-1/2" PF Thread: Standard fitting thread used across much of the Hanwha product line and compatible third-party gear. No adapters or custom work needed if your camera uses this spec.
• Aluminum Body: Corrosion-resistant enough for both indoor and outdoor use. Weight of 200g keeps ceiling anchor loads manageable and lowers installation labor.
• Compact Profile (154.8mm Ø × 47.0mm H): Minimal visual presence when installed. In spaces where ceiling aesthetics matter—offices, retail, hospitality—this design sits back without drawing attention to the surveillance infrastructure.

Deployment Considerations:

• Ceiling anchor selection is critical. The mount is only as strong as the fastening hardware you use. Do not attempt drywall-only installation; you need structural support (building framing, suspended ceiling grid with proper bracing, or threaded rod anchors).
• The white finish is not a differentiator here—it's practical. Blends with most suspended ceilings, but UV exposure in fully outdoor or sunlit installations will degrade the finish over time. Consider a shaded mounting location or protective coating if you're in a high-UV environment.

The SBP-300HMW5 works best in office, retail, education, and public facility deployments where camera placement overhead is required and the 1.5" PF thread is already supported by your camera inventory. It's a dependable, no-frills accessory—don't expect it to solve weight limits or non-standard thread interfaces. Verify thread compatibility with your camera before ordering.