Kantech · KTES-SPEAK

Kantech KTES-SPEAK Wall/Ceiling/Pendant Speaker

Two-way speaker with mic for Kantech access control systems

• Speaker with microphone for two-way audio at the door
• Wall, ceiling, or pendant mount for any install profile
• Integrates with Kantech access control platforms

Kantech · KTES-US

Kantech KTES-US Telephone Entry System 250 Tenants

Telephone entry for 250–3,000 tenants without per-unit hardware

• Telephone entry system for up to 250 tenants
• Tenants answer calls on existing phone lines to admit
• Proximity + keypad + Wiegand for credentialed entry

Kantech · KTES-INDEX-F

Kantech Paper Index Illuminated LED

LED-illuminated paper index for Kantech access control operator stations

• LED-illuminated paper index for low-light control rooms
• Printed tenant names and access levels at the panel
• 12VDC powered from KTES supply, no extra wiring

Kantech · SK-CE-400-SCSG

Kantech SK-CE-400-SCSG Starter Kit with EntraPass

Enterprise access control kit with centralized multi-site management

• Access control starter kit with EntraPass software
• Multi-technology reader: DESFire + MIFARE + HID + NFC
• AES-128 + RS-485 for enterprise-grade key management

Kantech · SK-CE402

Kantech SK-CE402 Starter Kit with EntraPass Corporate

Enterprise access control starter kit for multi-site deployments

• Access control starter kit with EntraPass Corporate
• Centralized multi-site cardholder + facility management
• Proximity reader + TCP/IP + RS-485 + RS-232 support

Kantech · SK-SE-1M-SCM

Kantech SK-SE-1M EntraPass Special Edition Starter Kit

Complete access control starter kit with EntraPass software for small-to-mid facilities

• EntraPass Special Edition + multi-tech smart card reader
• Handles DESFire, MIFARE, HID, NFC 13.56MHz, and 125kHz prox
• AES-128 encrypted RS-485 link to controller

Kantech · SK-SE-1M-RDR

Kantech SK-SE-1M-RDR Starter Kit with EntraPass

Complete access control for 1 door with EntraPass software included

• EntraPass Special Edition with 1-month software license
• 10 lb compact starter kit for single-door deployments
• 12VDC integrated controller + reader hardware bundle

Kantech · SK-SE-2M-SCSG

Kantech SK-SE-2M-SCSG Starter Kit EntraPass Special Edition

Complete access control starter kit with EntraPass software and multi-credential support

• EntraPass Special Edition + KT-2 controller in one kit
• 12VDC starter bundle ready to deploy out of the box
• Multi-vendor sourcing eliminated — single SKU starts the system

Kantech · SK-SE-400-SCM

Kantech SK-SE-400-SCM EntraPass Special Edition Starter Kit

EntraPass Special Edition starter kit with 4-door controller, multi-tech readers

• EntraPass Special Edition starter kit — 4-door access control
• Supports MIFARE + HID + NFC + 125 kHz Prox in one platform
• Wiegand + RS-485 for legacy reader and modern OSDP integration

Kantech · SK-CE-2M-SCM

Kantech Starter Kit EntraPass Corporate Edition

Complete 4-door access control kit with EntraPass Corporate software

• EntraPass Corporate Edition with two networked controllers
• Multi-tech reader handles MIFARE, HID, NFC, and 125kHz prox
• RS-485 + Wiegand communication for mixed-vendor sites

Kantech · SK-CE-1M-RDR

Kantech Starter Kit with EntraPass Corporate Edition

Network access control starter kit with EntraPass Corporate Edition software

• 1-door KT-1 starter kit with P225XSF ioProx reader bundled
• EntraPass Corporate Edition v6.02+ software included
• 12VDC complete kit deploys access control in one afternoon

Kantech · SK-CE-1M-SCM

Kantech Starter Kit with EntraPass Corporate Edition

Enterprise access control with centralized multi-site management

• KT-1 single-door controller + EntraPass Corporate bundled
• TCP/IP networked controller deploys on existing LAN
• 12VDC complete starter kit for first access control site

Kantech · SK-SE403

Kantech Starter Kit with EntraPass Special Edition

Multi-door access control starter kit with EntraPass software included

• 4-door starter kit with EntraPass Special Edition
• KT-400 controller + proximity readers + networking gear
• TCP/IP + RS-485 + RS-232 + EntraPass for small sites

Kantech · VC-485

Kantech VC-485 RS-232 to RS-485 Communication Interface

RS-232 to RS-485 converter for multi-device access control networks

Lifesafety Power · E4A-BACKPLATE-ONLY

Lifesafety Power E4A-BACKPLATE-ONLY Backplate

Dedicated backplate designed for use with E4A series enclosures

• Replacement backplate assembly restores E4A enclosure functionality without full unit swap.
• Designed for E4A series ensuring precise mechanical fit and correct electrical alignment.
• Supports access control, alarm, and backup battery staging deployments at 230 VAC installations.

Lifesafety Power · E8V-BOXED

Lifesafety Power E8V-BOXED Enclosure. E8 36" X 30" X6-1/2" Blk

36"×30"×6.5" black wall-mounted enclosure designed to house power distribution equipment, battery backup modules, and access control wiring in

• 36"×30"×6.5" profile fits standard 16" and 24" stud-center wall cavities.
• Vertx back plate supports 35mm DIN rail, M5/M6 fasteners for organized terminations.
• Top and side knockouts accept conduit entries up to 1.5" NPT for clean cable routing.

Lifesafety Power · RGM-D8PZ1

Lifesafety Power Rgm-D8PZ1 Empty R2U Rackdrawer

N empty 2U rackdrawer designed to organize and mount up to four Lenel access control panels on a removable backplate within a standard 19-inch rack

• Mounts up to four Lenel access control panels on a removable backplate in 2U space.
• 19" EIA-compliant form factor (19W × 3.5H × 20.5D in.) fits standard rack rails.
• Integrated lockset and wire management arm reduce tampering risk and cable strain.

Lifesafety Power · RGM-X-BOXED

Lifesafety Power RGM-X-BOXED Gemini Rack Drawer RGM-X 2U black

2U rack-mount drawer designed to integrate with Lifesafety Power Gemini power distribution systems

• Mounts in standard 19-inch racks, occupying only 2U of vertical space.
• Pull-out drawer design provides direct access to internal components during maintenance.
• Engineered for Lifesafety Power Gemini system frames; verify chassis compatibility before ordering.

Napco · GEM-EZM8

Napco GEM-EZM8 Access Control Module

Distributed access processor for multi-door commercial systems with card and PIN

• GEM-EZM8 access control module for credential validation
• Card and PIN with Wiegand/Serial reader support
• Local door strike decisions in milliseconds

Potter · PFC-4064

Potter Conventional Fire Alarm Control Panel

Conventional fire alarm panel with 120 VAC power and 24 VDC backup

• Zone-based conventional architecture supports ionization, photoelectric, and heat detectors.
• 120 VAC primary supply with 24 VDC battery backup charger maintains operation during power loss.
• Built-in circuit supervision detects open or short-circuit faults for fast wiring fault isolation.

Qolsys · IQP4003

Qolsys IQP4003 IQ Panel 4 Alarm Control Panel with AT&T LTE

Cellular alarm panel with AT&T LTE, touchscreen, works independent of broadband

• IQ Panel 4 alarm controller with integrated AT&T LTE cellular
• Cellular-direct path - no broadband or ISP failover gateway needed
• 8 MP camera plus built-in microphone for video and audio verification

Qolsys · IQP4004

Qolsys IQP4004 IQ Panel 4 Alarm Control Panel

7-inch touchscreen panel with integrated Verizon LTE for reliable alarm monitoring

• IQ Panel 4 alarm controller with integrated Verizon LTE cellular
• Cellular-direct path keeps monitoring active if broadband fails
• 12V backup keeps panel and cellular link alive during AC outage

Qolsys · QS1115-840

Qolsys QS1115-840 IQ Tilt-S Alarm Control Panel

Compact 345MHz wireless alarm panel with 600ft range and battery backup

• IQ Tilt-S 345 MHz two-way RF alarm controller for slim wall placement
• Compact 2.5 x 1 x 0.5 in form factor for tight tilt-mount geometries
• Operates -10 to 50 degrees C for unconditioned closet placement

Qolsys · QS1133-840

Qolsys QS1133-840 IQ DW S-Line Alarm Controller

345MHz wireless alarm controller for professional S-Line installations

• IQ DW S-Line 345 MHz wireless door and window contact controller
• Supervised wireless protocol confirms sensor reach to panel
• Compact 2.6 x 0.75 x 0.75 in form factor for slim frame placement

Qolsys · QS1135-840

Qolsys QS1135-840 IQ DW Mini S-Line Controller

Compact 345MHz wireless controller for residential and light commercial

• IQ DW Mini S-Line 345 MHz controller for compact frame installs
• 600 ft (200m) open-air wireless reach to IQ Panel receivers
• Compact 2.25 x 1 x 0.5 in form factor for narrow window jamb fit

Qolsys · QS1136-840

Qolsys QS1136-840 IQ DW Mini Wireless Door/Window Sensor

Compact 345MHz wireless door/window sensor for Qolsys IQ panels

• Wireless door and window sensor enrolls native into IQ Panel zones
• 600 ft (200m) open-air wireless reach to Qolsys panel receivers
• Compact 2.25 x 1 x 0.5 in form factor for slim door and window fit

Qolsys · QS1231-840

Qolsys QS1231-840 IQ Motion Controller (345MHz)

345MHz wireless motion controller for residential & light commercial systems

• IQ Motion controller on 345 MHz wireless for Qolsys IQ panels
• Wireless integration eliminates dedicated motion-sensor cable runs
• Corner-mount form factor for typical room coverage geometry

Qolsys · QS1431-840

Qolsys QS1431-840 IQ Glass-S Alarm Controller

Wireless 345MHz alarm controller with touchscreen interface for small-to-medium sites

• IQ Glass-S 345 MHz wireless glassbreak sensor for IQ panels
• Wireless install eliminates dedicated sensor wiring to windows
• Wall or ceiling mount with two CR123A 3V batteries (multi-year)

Qolsys · QS5536-840

Qolsys QS5536-840 IQ Flood 345MHz Wireless Water Sensor

Wireless water sensor with 600ft range for Qolsys IQ panels

• Wireless water sensor on 345 MHz native to Qolsys IQ panels
• Encrypted RF resists eavesdropping and replay attacks
• 600 ft open-air reach to IQ Panel 2, 2+, and 4 receivers

Qolsys · QW9104-840

Qolsys QW9104-840 IQ Wi-Fi 6E Module

Wi-Fi 6E module for Qolsys IQ panels with WPA3 encryption

• Wi-Fi 6E (802.11ax) module for IQ Panel network connectivity
• Dual-band 2.4 GHz and 5 GHz operation across crowded RF environments
• WPA3 and WPA2 encryption protects panel-to-LAN traffic

Speco Technologies · ACKIT1B

Speco ACKIT1B 4 Door Access Control System

4-door access control with integrated power and relay outputs

• Independent control per door with card readers, keypads, or hybrid options
• Built-in power distribution for door strikes and reader circuits
• Status monitoring and alarm inputs on each door with expandable architecture

Speco Technologies · A2E4

Speco Technologies A2E4 2–4 Door Access Control System

2–4 door access control with quad-core processor and 45+ tx/sec

• Handles 2 doors standard, expands to 4 with optional A2M board
• Four Wiegand inputs plus 4 relay outputs (2 lock, 2 aux) at 24V 2.0A
• 115VAC power input; optional 12V 7Ah battery backup for readers

Speco Technologies · A2E4P

Speco Technologies A2E4P 2-4 Door Access Control

2–4 door access panel with integrated 375mA lock power and quad-core processor

• Handles 45+ transactions per second across multiple readers without lag or bottlenecks
• Built-in 24V or 12V selectable power eliminates need for separate lock power modules
• Expands from 2 to 4 doors with optional A2M board when facility layout changes

Speco Technologies · A2M

Speco Technologies A2M 2-Door Expansion Board

Expand 2-door controller to 4 doors with dual Wiegand readers per door

• 2 independent doors, each with dual Wiegand reader pairs @ 300mA 12V
• 2 Form C lock relays @ 24V 2.0A per door for direct solenoid control
• 2 Form C auxiliary relays per door for alarm, strike, or exit control

Speco Technologies · A8P

Speco Technologies A8P 8 Door Access Control Panel with Power

8-door access control panel with integrated power supply

• Manages 8 doors from single centralized panel, reducing wiring complexity
• Built-in power supply for strike mechanisms and access control devices
• DIN rail mount integrates directly into existing security cabinet infrastructure

Speco Technologies · ACKIT1

Speco Technologies ACKIT1 Access Control Kit Bundle

Complete access control mounting kit for commercial building deployments

• Pre-assembled hardware reduces on-site prep and speeds installation
• Single bundle consolidates all components needed for access points
• White housing designed for standard access control system integration