Ubiquiti · UA-CARD-B-10

Ubiquiti UA-CARD-B-10 secure NFC cards used for access control

Passive NFC access cards for UniFi Access control systems

• Battery-free passive NFC eliminates replacement logistics across large credential deployments.
• Provisioning, revocation, and audit logging managed centrally via UniFi Management Platform.
• Real-time revocation pushes instant deactivation to all connected UniFi Access readers.

Ubiquiti · UA-CARD-B-100

Ubiquiti UA-CARD-B-100 secure NFC cards 100 pack -white

NFC credential cards for UniFi Access—100 pack, white wallet-sized

• NFC active-handshake authentication reduces unauthorized card cloning risk vs. passive RFID.
• 100-card bulk pack supports initial rollouts and replacement cycles for 50–200 user sites.
• Provisioning and revocation managed entirely within the UniFi console—no extra licensing.

Ubiquiti · UA-CARD-W-10

Ubiquiti UA-CARD-W-10 secure NFC cards 10 pack -white

NFC access cards 10-pack for UniFi Access deployments

• ISO/IEC 14443 Type 2 NFC enables contactless auth at all UniFi Access readers.
• Enroll, assign, and revoke credentials entirely within UniFi Controller—no encoder needed.
• 10-card pack supports department-level expansions and pilot rollouts without full reissue.

Ubiquiti · UA-CARD-W-100

Ubiquiti UA-CARD-W-100 secure NFC cards 100 pack -black

100-pack NFC access cards for UniFi Access Control deployments

• Passive NFC (Tags 1–5) eliminates batteries and maintenance for 10+ year credential life.
• 100-card bulk pack cuts per-credential cost for campuses, healthcare, and hospitality sites.
• Server-side revocation via UniFi console propagates to all readers in seconds.

Ubiquiti · UA-G2

Ubiquiti UA-G2 Access Reader G2

Compact in-wall NFC/Bluetooth reader for UniFi access control

• Tri-mode NFC/Bluetooth 4.1/Mifare support eases phased card-to-mobile migrations.
• IP55-rated polycarbonate enclosure handles moisture and dust in vestibule deployments.
• 802.3af PoE at 5W draws power from any standard switch—no local supply required.

Ubiquiti · UA-G2-BLACK

Ubiquiti UA-G2-BLACK UniFi Access Reader G2

In-wall proximity card reader with PoE power, UniFi management

• Draws power via 802.3af PoE, eliminating separate low-voltage runs to each door.
• IP55-rated enclosure handles dust and water exposure in entry vestibules or lobbies.
• Mounts flush in a standard gang box, simplifying retrofits into existing door frames.

Ubiquiti · UA-G2-PRO

Ubiquiti UA-G2-PRO Access Reader Cloud-Managed Entry Control

Cloud-managed wall reader, PoE only, IP55 rated for any entrance

• Single GbE PoE port draws only 6W at 48V DC, eliminating dedicated power runs.
• IP55-rated polycarbonate enclosure handles indoor and covered outdoor entrances.
• UniFi Access cloud management centralizes multi-site policy and audit logging.

Ubiquiti · UA-G3-B

Ubiquiti UA-G3-B 4th gen reader with Apple Touch Pass

4th gen compact reader with Apple Touch Pass and UniFi control

• Apple Touch Pass support eliminates physical badge dependency for iOS users.
• UniFi Controller integration centralizes RBAC and real-time credential updates.
• 0.2 lb compact form factor installs on standard door frames without modification.

Ubiquiti · UA-G3-FLEX-B

Ubiquiti UA-G3-FLEX-B NFC Reader with Keypad

NFC reader with keypad and Apple Touch Pass for outdoor access control

• Multi-factor entry via NFC, Bluetooth 4.1, and PIN keypad suits high-security zones.
• PoE 802.3af powered at 5W; single RJ45 simplifies wiring with no separate power run.
• Rated -30 to 60°C with CE, FCC, UL 294 certs for compliant outdoor deployments.

Ubiquiti · UA-G3-FLEX-W

Ubiquiti UA-G3-FLEX-W Third-generation NFC card reader

NFC card reader with integrated keypad for UniFi access control

• Supports NFC Forum tags T1T–T5T plus Apple Touch Pass for legacy and mobile credentials.
• Integrated keypad enables card+PIN or mobile+PIN MFA without additional reader hardware.
• 802.3af PoE powers the unit over existing network cabling, eliminating separate power runs.

Ubiquiti · UA-G3-PRO-B

Ubiquiti UA-G3-PRO-B NFC Access Control Reader

NFC wall-mount reader for UniFi Access with PoE and indoor/outdoor use

• PoE 802.3af (6W, 48V DC) eliminates dedicated power runs at each reader installation.
• Rated for outdoor use, –10 to 45 °C, covering lobbies, warehouses, and perimeter doors.
• UL 294, CE, FCC, IC, and CAN/ULC-60839-11-1 certifications satisfy enterprise compliance checks.

Ubiquiti · UA-G3-PRO-W

Ubiquiti UA-G3-PRO-W NFC Access Reader

Wall-mounted NFC reader for enterprise access control, PoE powered

• ISO/IEC 14443 Type A/B NFC reads cards, badges, and mobile credentials via one reader.
• Powered by 802.3af PoE at 6W; single GbE RJ45 port eliminates separate power wiring runs.
• UL 294, CE, FCC, IC, and CAN/ULC-60839-11-1 certified for enterprise and outdoor deployment.

Ubiquiti · UA-G3-SK

Ubiquiti UA-G3-SK Single-Door Access Control Reader

Cloud-managed single-door reader with PoE power and IP54 durability

• IP54-rated polycarbonate/stainless enclosure handles dust and low-pressure water ingress.
• Single PoE connection (48V DC, 5W) eliminates local power runs and simplifies cabling.
• NDAA-compliant design meets supply chain integrity requirements for government deployments.

Ubiquiti · UA-G3-SK-GATE

Ubiquiti UA-G3-SK-GATE Access kit with Hub, Intercom, PoE++

Complete gate access kit with hub, intercom, and PoE++ power

• IP65-rated polycarbonate hub survives outdoor gate installs without added weatherproofing.
• PoE++ (802.3bt) output powers the bundled G3 Intercom and one additional access device.
• DIN-rail mount and pre-matched hub/intercom bundle eliminate separate controller sourcing.

Ubiquiti · UA-G3-SK-PRO

Ubiquiti UA-G3-SK-PRO cont. for 1 door with 2 readers, AppleTP

Single-door access control with dual readers, PoE powered

• Single 802.3bt PoE++ cable delivers power and data, eliminating low-voltage conduit runs.
• Dual-reader support enables badge+PIN or NFC multi-factor auth on one door controller.
• IP54-rated enclosure with ±15kV ESD protection suits electrically noisy install environments.

Ubiquiti · UA-G3-W

Ubiquiti UA-G3-W Access Control Reader with Apple Touch Pass

UniFi access reader with Apple Touch Pass wallet support

• Apple Touch Pass lets iOS users authenticate via mobile wallet—no NFC cards to issue.
• Managed inside UniFi Access Control, keeping physical access on your existing console.
• 0.200 lb compact form factor fits door retrofits without frame modification or extra conduit.

Ubiquiti · UA-HUB-DOOR

Ubiquiti UA-HUB-DOOR Single-Door Access Control Hub

Single-door access hub with PoE++ power for UniFi ecosystems

• PoE++ (802.3bt) powered—no separate supply needed, simplifying conduit runs.
• Five Gigabit ports support readers and downstream devices from a single hub.
• UL 294 and NDAA compliant for regulated facilities and federal-eligible deployments.

Ubiquiti · UA-HUB-GATE

Ubiquiti UA-HUB-GATE adv Gate Hub for seamless gate access

Compact UniFi Access hub for distributed gate control with PoE++

• Single PoE++ (802.3bt) uplink powers the hub and delivers 55W across four PoE+ ports.
• Two dry-relay outputs (30V DC, 1A) drive electric strikes or mag-locks without external modules.
• Rated –30 to 60°C with DIN-rail mount; UL 294, FCC, CE, and NDAA certified for deployment.

Ubiquiti · UA-LOCK-MAGNETIC-270KG

Ubiquiti UA-LOCK-MAGNETIC-270KG Fail-Safe Magnetic Lock

270kg fail-safe magnetic lock for UniFi Access control systems

• 270 kg (595 lb) holding force resists brute-force defeat on standard single-entry doors.
• Fail-safe design releases automatically on power loss, satisfying emergency egress codes.
• Integrates natively with UniFi Access Hub, eliminating separate access control infrastructure.

Ubiquiti · UA-LOCK-MAGNETIC-540KG

Ubiquiti UA-LOCK-MAGNETIC-540KG Fail-Safe Magnetic Lock

540 kg fail-safe magnetic lock for UniFi Access control

• 540 kg (1,190 lb) holding force secures standard commercial single-leaf doors.
• Fail-safe design releases on power loss, meeting life-safety egress requirements.
• No moving parts reduce maintenance cycles across multi-site UniFi Access deployments.

Ubiquiti · UA-POCKET

Ubiquiti UA-POCKET UniFi Access pocket key fob (10-pack)

IP54 NFC pocket keyfobs for UniFi Access, 10-pack with encryption

• IP54-rated polycarbonate and stainless steel housing survives rain, dust, and splash.
• MIFARE DESFire EV3 at 13.56 MHz with multi-layer encryption blocks cloning and duplication.
• 10 individually assignable fobs simplify user/visitor policy management and audit trails.

Ubiquiti · UA-SK-ELEVATOR

Ubiquiti UA-SK-ELEVATOR Elevator Reader Connector

PoE++ elevator hub with IP55 rating for in-car access readers

• Single Ethernet run delivers PoE++ (802.3bt) power to in-car readers, eliminating shaft wiring.
• IP55-rated polycarbonate enclosure resists elevator shaft moisture, dust, and periodic washdown.
• Eighteen 30V DC / 2A relay outputs interface with legacy elevator controls without replacement.

Ubiquiti · UA-ULTRA

Ubiquiti UA-ULTRA Access Reader

Integrated access reader + hub with tamper detection and PoE+ power

• Integrated reader and hub on single PoE+ feed cuts per-door cable runs and hardware count.
• IP55 rating and -30 to 40 °C operating range suit vestibules, docks, and covered entries.
• NDAA-compliant with UL 294 and FCC certifications, meeting federal and commercial requirements.

Ubiquiti · UACC-LOCK-STRIKE-SAFE-15MM

Ubiquiti UACC-LOCK-STRIKE-SAFE-15MM Fail-safe electric strike

Fail-safe electric strike with 1,200 kg holding force for UniFi access control

• Delivers 1,200 kg (2,645 lb) holding force for high-security single-door deployments.
• Fail-safe design releases on power loss; integrates via 12V DC/400mA with UniFi access control.
• DPS+/DPS- dry contact terminals enable configurable open/closed door status monitoring.

Ubiquiti · UACC-LOCK-STRIKE-SAFE-8MM

Ubiquiti UACC-LOCK-STRIKE-SAFE-8MM Fail-safe electric strike

Fail-safe electric strike with 500 lb holding force for UniFi Access

• Delivers 500 lb (227 kg) holding force on wooden or metal door frames.
• Runs on 12V DC at 200mA; integrates with UniFi Access or any dry-contact system.
• NDAA compliant with FCC, IC, and CE certifications; rated -10 to 60°C.

Ubiquiti · UACC-LOCK-STRIKE-SECURE-15MM

Ubiquiti UACC-LOCK-STRIKE-SECURE-15MM Fail-Secure Lock

Fail-secure strike lock, 1,200 kg holding force, UniFi Access ready

• 1,200 kg holding force resists forced entry on server rooms and secure perimeters.
• Fail-secure design keeps door locked during power loss, preventing unauthorized access.
• 12V DC at 400mA integrates directly into UniFi Access hubs without extra power supply.

Ubiquiti · UACC-LOCK-STRIKE-SECURE-8MM

Ubiquiti UACC-LOCK-STRIKE-SECURE-8MM Fail-secure electric strike

Fail-secure electric strike with 500 lb holding force for 8 mm slots

• 500 lb holding force with fail-secure logic keeps doors locked on power loss.
• 12V DC at 200 mA integrates directly into UniFi access control via dry contact.
• Zinc alloy body fits 8 mm door frame recesses; rated -10 to 60°C for varied environments.

Ubiquiti · USL-SIREN

Ubiquiti USL-SIREN All-weather SuperLink siren 110 dB alarm

110 dB all-weather siren with IP56 rating for UniFi Protect

• 110 dB output in an IP56-rated enclosure withstands rain, dust, and -30 to 50°C swings.
• Four CR123A batteries enable wire-free deployment up to 2 km line-of-sight via SuperLink.
• NDAA-compliant with FCC/CE certifications; integrates natively with UniFi Protect controllers only.

Viking Electronics · AES-2000F

Viking AES-2000F 525-Name Apartment Entry System Flush Mount

Flush-mount apartment entry system designed for multi-tenant residential and commercial buildings that need scalable directory access without complex

Viking Electronics · AES-2005S

Viking AES-2005S 525-Name Apartment Entry System w/ Camera

Surface-mount apartment entry system built for multi-tenant residential and commercial properties that need a durable, expandable directory with

Viking Electronics · AES-2005F

Viking Electronics AES-2005F Apartment Entry System Camera

Flush-mount apartment entry system designed for multi-tenant residential and commercial buildings that need a clean, in-wall installation profile

Viking Electronics · SLP-4

Viking Electronics SLP-4 Single Line Paging Controller

Single-line paging controller built for small commercial facilities, light industrial spaces, and entry-control applications where you need on-demand

Viking Electronics · PRX-2

Viking Proximity Card Reader and Keypad - PRX-2

125 kHz proximity card reader and keypad combined into a single unit, designed for door and gate access control deployments where you need both

Viking Electronics · SR-1

Viking Single Line Loud Ringer and Door Chime - SR-1

Single-line loud ringer and door chime designed to monitor analog telephone lines — including PABX and KSU station ports — and produce a high-output

Viking Electronics · SLP-1

Viking SLP-1 Single Line Paging Controller 2W Amp Music on Hold

Single-line paging controller built for small commercial environments where you need overhead paging, music on hold, intercom capability, and

Wasp · 633809001000

Wasp 633809001000 Key Fob

• Integrates with AssetCloud and InventoryCloud for streamlined asset tracking.
• Enables remote association of scanned items to locations or workflows wirelessly.
• Factory-new genuine Wasp accessory with full US warranty coverage included.