Lifesafety Power · FPO150-D8E4M1

Lifesafety Power FPO150-D8E4M1 FPO150-D8E4M1

Power distribution accessory from the Lifesafety Power product line, engineered for multi-output camera and access control deployments where

• Centralizes power distribution across multiple IP cameras and access control devices.
• Eliminates individual wall adapters, reducing cable runs and field wiring complexity.
• Battery backup support enables continuity during outages in commercial deployments.

Lifesafety Power · FPO150-D8PE1

Lifesafety Power FPO150-D8PE1 150W Svps 8 Aux Out E1 Cabinet

150W switched-mode power supply housed in an E1 enclosure, designed to distribute DC power to networked security equipment across distributed

• 150W switched-mode supply powers up to 8 Class 2-limited 2.5A outputs concurrently.
• Eliminates downstream distribution modules, reducing rack complexity and install labor.
• Fits standard 19-inch racks or wall-mount enclosures for scalable distributed deployments.

Lifesafety Power · FPO150-D8PE2M

Lifesafety Power FPO150-D8PE2M 4 Door

Four-door power distribution unit designed for access control and security system integration

• Centralizes power for four doors, reducing wiring runs and point-of-failure risk.
• Supervised outputs provide real-time fault alerts to the access control panel.
• Wall or DIN-rail mountable for flexible placement in equipment or server rooms.

Lifesafety Power · FPO150-D8PE4M1

Lifesafety Power FPO150-D8PE4M1 FPO150-D8PE4M1

150-watt regulated power supply designed to provision multiple cameras, access control readers, or mixed security peripheral loads in distributed

• 150W regulated output supports multiple cameras or access control readers simultaneously.
• Multi-output configuration eliminates daisy-chaining, reducing voltage drop on long cable runs.
• Wide AC input range accepts 110–240V, simplifying deployment across varied facility supply voltages.

Lifesafety Power · FPO150-D8PE6M

Lifesafety Power FPO150-D8PE6M FPO150-D8PE6M

150-watt industrial power supply designed to distribute regulated voltage across eight independent monitored channels — a typical architecture for

• Eight independent monitored channels let you supervise each camera or device branch separately.
• DIN-rail mount (35mm) integrates cleanly into panel-based equipment room deployments.
• Supports 12VDC and 24VDC outputs, covering both IP and legacy analog field devices.

Lifesafety Power · FPO150-D8PE6M1

Lifesafety Power FPO150-D8PE6M1 FPO150-D8PE6M1

150-watt managed power distribution unit designed for integrated security and access control installations

• 150W managed PDU consolidates power to cameras, access points, and intercoms.
• Per-output current monitoring detects load faults before downstream damage occurs.
• Fits standard 19-inch rack and wall-mount enclosures for flexible cabinet deployment.

Lifesafety Power · FPO150-D8PE8M

Lifesafety Power FPO150-D8PE8M FPO150-D8PE8M

150-watt distributed power supply designed to centralize 12VDC output across multiple security and access control circuits

• 150W total output consolidates power for cameras, locks, and readers in one chassis.
• Eight discrete output channels let you segment load by zone for cleaner troubleshooting.
• 12VDC distributed architecture eliminates multiple wall-mount transformers across the site.

Lifesafety Power · FPO150-F8PE1

Lifesafety Power FPO150-F8PE1 8 Fai Control Outputs 12A/12VOR 6A

Class 2 power-limited supply designed for security installations requiring multiple supervised output circuits

• Delivers 150W at 12A/12VDC or 6A/24VDC for flexible multi-device deployments.
• Eight independently supervised FAI outputs at 2.5A each isolate faults per branch.
• Class 2 power-limited rating meets UL/NEC low-voltage code requirements.

Lifesafety Power · FPO150/150-2C82D8E4

Lifesafety Power FPO150/150-2C82D8E4 16 lock 16 auxiliary output

150W redundant power supply built for access control systems requiring independent power feeds to multiple lock controllers and auxiliary loads

• 150W redundant supply powers 16 lock outputs and 16 auxiliary outputs simultaneously.
• Each output is individually fused at 3A, isolating faults without disrupting other circuits.
• Supports 12V or 24V DC operation, fitting mag locks, strikes, and solenoid loads.

Lifesafety Power · FPO150/150-2C8P2D8PE4

Lifesafety Power FPO150/150-2C8P2D8PE4 16 lock 16 auxiliary outpu

150W power distribution enclosure designed to feed door locks and auxiliary devices in access control systems

• Feeds 16 dedicated lock circuits at 2.5A each, eliminating home-run wiring to the main panel.
• 16 auxiliary output circuits in 12V/12A or 24V/6A config support mixed ancillary device loads.
• 150W E4-rated enclosure suits standard indoor commercial multi-door access control deployments.

Lifesafety Power · FPO150/150-2C8P2D8PE8M1

Lifesafety Power FPO150/150-2C8P2D8PE8M1 FPO150/150-2C8P2D8PE8M1

150W power distribution unit designed to supply multiple networked security cameras, access control readers, and auxiliary devices in integrated

• Dual isolated outputs let you segregate camera and reader/lock circuits in one enclosure.
• 150W total capacity supports multiple IP cameras, access readers, and auxiliary devices.
• Centralized power distribution reduces field wiring complexity in rack or wall-mount cabinets.

Lifesafety Power · FPO150/150-C4PD8PE2

Lifesafety Power FPO150/150-C4PD8PE2 FPO150/150-C4PD8PE2

Dual-output 150W power supply enclosure designed to distribute power across access control, door locks, and auxiliary systems in small-to-medium

• Dual 150W supplies run lock hardware and control logic on separate circuits.
• Four dedicated lock outputs support direct mag-lock and electric strike wiring.
• Eight Class 2 auxiliary outputs at 2.5A each distribute power to sensors and devices.

Lifesafety Power · FPO150/150-C8D8PE4M

Lifesafety Power FPO150/150-C8D8PE4M FPO150/150-C8D8PE4M

150W redundant power supply designed for security integrations requiring fault-tolerant power distribution

• 150W redundant supply with dual AC inputs automatically fails over if primary source drops.
• Multiple regulated outputs power cameras, door locks, and intercoms from one enclosure.
• Supports standalone or N+1 redundant pair deployment for fault-tolerant 24/7 systems.

Lifesafety Power · FPO150/150-C8PD8PE2

Lifesafety Power FPO150/150-C8PD8PE2 8 lock 8 auxiliary outputs

150W class 2 power-limited supply designed to distribute power to eight electronic locks and eight auxiliary devices (sensors, indicators, solenoids)

• Distributes 150W across 8 lock outputs and 8 auxiliary channels from a single unit.
• Each output is current-limited to 2.5A, preventing channel interaction under mixed loads.
• Supports 12V (12A) or 24V (6A) operation, compatible with Honeywell, Salto, and Allegion panels.

Lifesafety Power · FPO150/250-2C82D8E4

Lifesafety Power FPO150/250-2C82D8E4 FPO150/250-2C82D8E4

16-channel fused power distribution enclosure from Lifesafety Power, sized for surveillance and access-control field installations where you need to

• 16 individually fused 3A outputs isolate faults so a single short won't cascade.
• Supports 12V or 24V DC input, delivering up to 150W for cameras, readers, and strikes.
• Single-enclosure distribution eliminates a separate power management rack in field zones.

Lifesafety Power · FPO150/250-2C82D8E4M1

Lifesafety Power FPO150/250-2C82D8E4M1 16-Door MCLASS Unif.PwrSys

16-door MCLASS unified power system rated for 400W output at 24VDC

• 400W at 24VDC consolidates power for up to 16 doors in a single enclosure.
• Eliminates multiple discrete supplies, reducing wiring complexity and labor.
• 120VAC input with 24VDC output suits EM locks, strikes, and REX sensors.

Lifesafety Power · FPO150/250-2C82D8E8M1

Lifesafety Power FPO150/250-2C82D8E8M1 PSB150W 12A/12V or 6A/24V

• Dual-voltage output (12A/12VDC or 6A/24VDC) supports mixed lock inventories from one module.
• Relay-switched, supervised outputs enable multi-door distribution without per-door power supplies.
• Panel-mount form factor integrates into enterprise access control enclosures with standard 12V/24V inputs.

Lifesafety Power · FPO150/250-2C82D8E8M2

Lifesafety Power FPO150/250-2C82D8E8M2 FPO150/250-2C82D8E8M2

400W dual-output power supply housed in a 16-drawer Mercury frame enclosure

• 400W dual-output supply delivers 12V and 24V to mixed-device arrays from one enclosure.
• 16-drawer Mercury frame allows per-circuit fusing and isolated routing across security zones.
• 36H×30W×4.5D-inch cabinet suits wall or rack mounting in closets and distribution rooms.

Lifesafety Power · FPO150/250-2C82D8E8S

Lifesafety Power FPO150/250-2C82D8E8S FPO150/250-2C82D8E8S

400W enclosed power supply designed for multi-camera surveillance deployments requiring simultaneous 12V and 24V rails

• 400W dual-output supply delivers simultaneous 12V and 24V rails for mixed loads.
• Supports 16-channel camera deployments plus accessory devices within a single budget.
• Standard 19-inch rack-mount profile fits existing security equipment racks directly.

Lifesafety Power · FPO150/250-2C82D8PBP8M2

Lifesafety Power FPO150/250-2C82D8PBP8M2 400W Dual Voltage 120

400W industrial power distribution unit designed for surveillance and access control systems

• 16 relay lock outputs support strikes, mag-locks, and solenoid devices in one chassis.
• 16 auxiliary outputs power cameras, LEDs, and control signals without added hardware.
• 400W capacity on 120 VAC input eliminates daisy-chained supplies across large deployments.

Lifesafety Power · FPO150/250-2C82D8PE4

Lifesafety Power FPO150/250-2C82D8PE4 FPO150/250-2C82D8PE4

Redundant power supply designed to deliver continuous, fault-tolerant power to multi-camera surveillance installations and access control systems

• Dual-channel output eliminates single points of failure in mission-critical deployments.
• Supports 12VDC or 24VDC rails for IP cameras, access panels, and alarm devices.
• DIN rail or cabinet wall mount accommodates standard security enclosure installations.

Lifesafety Power · FPO150/250-2C82D8PE4M1

Lifesafety Power FPO150/250-2C82D8PE4M1 FPO150/250-2C82D8PE4M1

400W dual-output power supply housed in a compact E4M1 enclosure (24"H × 20"W × 4.5"D) designed for access control systems, door strike frames, and

• 400W dual-rail output delivers simultaneous 12V and 24V from a single enclosure.
• 16-channel Mercury relay bank handles frequent switching for locks, alarms, and aux loads.
• E4M1 enclosure (24"H×20"W×4.5"D) fits standard security cabinets and equipment racks.

Lifesafety Power · FPO150/250-2C82D8PE6M1

Lifesafety Power FPO150/250-2C82D8PE6M1 FPO150/250-2C82D8PE6M1

N industrial dual-channel power supply designed to distribute regulated DC power to distributed security and access control equipment across

• Dual independent channels prevent a single-output fault from taking down the full system.
• Delivers 400W total capacity to power cameras, access panels, and alarm devices concurrently.
• Accepts 120 VAC input for direct integration into standard North American electrical infrastructure.

Lifesafety Power · FPO150/250-2C82D8PE8H1-WP-JNJ02

Lifesafety Power FPO150/250-2C82D8PE8H1-WP-JNJ02 400W Dual Voltag

400W dual voltage power supply built for access control and security system integration where you need independent voltage outputs to drive multiple

• 400W dual voltage output drives mixed 12V/24V DC loads from a single 120V AC source.
• 16 relay lock outputs support strikes, mag-locks, and momentary devices across one cabinet.
• 16 auxiliary outputs distribute power to sensors and low-draw control signals independently.

Lifesafety Power · FPO150/250-2C82D8PE8M1

Lifesafety Power FPO150/250-2C82D8PE8M1 FPO150/250-2C82D8PE8M1

Redundant power distribution module designed to supply and supervise multiple security devices in integrated access control and surveillance

• Dual independent output channels isolate faults so one failure won't cascade to the other.
• 400W total capacity supports mixed loads across access control and IP surveillance zones.
• 120 VAC input integrates directly into standard facility power without step-down conversion.

Lifesafety Power · FPO150/250-2C82D8PE8M1/P16-A

Lifesafety Power FPO150/250-2C82D8PE8M1/P16-A 400W Dual Voltage

400W dual voltage power supply designed for Mercury ProWire systems and distributed access control architectures

• Dual 12V/24V output rails power mixed lock and reader loads from one chassis.
• 16 supervised relay lock outputs plus 16 auxiliary outputs support medium-scale deployments.
• 120V AC input on a dedicated 20A circuit delivers up to 400W total system capacity.

Lifesafety Power · FPO150/250-2C83D8E8V/P16-B

Lifesafety Power FPO150/250-2C83D8E8V/P16-B 16DR DV 400W E8V

400W regulated power supply designed for multi-door access control and security applications

• 400W regulated output powers up to 16 independent door control rails simultaneously.
• Dual-voltage design delivers 12V DC and 24V DC to support mixed lock and reader loads.
• Ships pre-wired to Panduit standards for VERTX integration, reducing field assembly time.

Lifesafety Power · FPO150/250-2C83D8PE4M1/T16-A

Lifesafety Power FPO150/250-2C83D8PE4M1/T16-A 16DR DV 400W E4M1

400W dual-output prewired power supply designed for access control and security system infrastructure

• Dual-voltage 400W supply delivers 12A at 12VDC and 10A at 24VDC simultaneously.
• 16 dedicated lock outputs and 24 auxiliary outputs support mid-scale multi-door deployments.
• Factory-prewired to 1502/MR52 tie-wrap standard reduces on-site termination labor and errors.

Lifesafety Power · FPO150/250-2C83D8PE4M1/T16-C

Lifesafety Power FPO150/250-2C83D8PE4M1/T16-C 16DR DV 400W E4M1

400W prewired power supply designed for security and access control installations requiring multiple isolated outputs

• 400W dual-voltage output delivers 12A at 12V and 10A at 24V simultaneously.
• 16 individually isolated outputs eliminate crosstalk across locks, relays, and cameras.
• Factory-prewired MR52 connectors reduce on-site assembly time in dense panel builds.

Lifesafety Power · FPO150/250-2C83D8PE8M1/T16-A

Lifesafety Power FPO150/250-2C83D8PE8M1/T16-A 16DR E8M1 400W 12A

400W 16-door redundant power supply from Lifesafety Power, sized for distributed access control and security camera systems requiring dual voltage

• Delivers 12A at 12V and 10A at 24V simultaneously from a single 400W supply.
• Supports up to 16 independent door circuits, eliminating the need to stack supplies.
• Dual 120/240V AC input with built-in redundancy reduces single-point failure risk.

Lifesafety Power · FPO150/250-2C83D8PE8M2

Lifesafety Power FPO150/250-2C83D8PE8M2 FPO150/250-2C83D8PE8M2

Dual-output, supervised power distribution unit designed for security systems that require independent, monitored power circuits

• Dual independent monitored outputs enable per-circuit fault isolation across camera and access control feeds.
• 400W capacity supports mid-to-large security deployments with multiple device types on separate supervised circuits.
• Each output detects open-circuit, short-circuit, and overload conditions independently, preventing silent outages.

Lifesafety Power · FPO150/250-2C83D8PE8M2/P16-A

Lifesafety Power FPO150/250-2C83D8PE8M2/P16-A 16DR DV E8V 400W 12

400W pre-wired power supply designed for access control and surveillance camera deployments where you need regulated 12V and 24V outputs on separate

• 400W total capacity powers mixed lock, camera, and battery circuits simultaneously.
• 16 independent relay circuits support door strikes, mag locks, and alarm switching.
• Factory pre-wired terminal blocks eliminate custom harness assembly on installation day.

Lifesafety Power · FPO150/250-2C83D8PE8M2/P16-B

Lifesafety Power FPO150/250-2C83D8PE8M2/P16-B 16DR E8M2 400W 12A

400W distributed power supply designed for multi-device security installations requiring simultaneous 12V and 24V outputs

• 16 independent locked outputs isolate faults — one tripped circuit leaves 15 active.
• Simultaneous 12VDC/12A and 24VDC/10A outputs eliminate separate power chains per voltage.
• 400W capacity and per-output thermal breakers reduce service calls on transient faults.

Lifesafety Power · FPO150/250-2C83D8PE8M2/T16-A

Lifesafety Power FPO150/250-2C83D8PE8M2/T16-A 16DR E8M2 400W 12A

400W dual-voltage power supply designed to centralize power distribution across multi-camera and access control deployments

• 400W dual-voltage output delivers 12A at 12VDC and 10A at 24VDC from one unit.
• 16 supervised output channels enable per-device fault detection and independent reset.
• Supports mixed IP camera, card reader, lock, and auxiliary loads in a single enclosure.

Lifesafety Power · FPO150/250-2C83D8PE8M2/T16-B

Lifesafety Power FPO150/250-2C83D8PE8M2/T16-B 16DR E8M2 400W 12A

Pre-wired 400W commercial power supply designed for access control and integrated security systems requiring dual fixed-voltage outputs

• Delivers 12A at 12VDC and 10A at 24VDC simultaneously from a single 400W enclosure.
• 16 pre-wired output channels reduce on-site assembly time on large access control installs.
• Dual-voltage architecture supports mixed loads: mag locks on 12V, readers/logic on 24V.

Lifesafety Power · FPO150/250-2C8P2D8PE4

Lifesafety Power FPO150/250-2C8P2D8PE4 16 Lock 16 Auxiliary Outp

16-lock, 16-auxiliary output power supply designed for distributed access control and door strike/magnetic lock installations

• Supports 16 lock outputs and 16 auxiliary outputs from a single 150W supply.
• Each lock circuit is Class 2 current-limited to 2.5A—no inline fuses required.
• Runs 12V or 24V loads; scalable to 250W for higher-density door deployments.