Lifesafety Power FPO150/250-2C83D8PE8M1/T16-A 16DR E8M1 400W 12A

Lifesafety Power FPO150/250-2C83D8PE8M1/T16-A 16-Door Power Supply

Overview

The FPO150/250-2C83D8PE8M1/T16-A is a 400W 16-door redundant power supply from Lifesafety Power, sized for distributed access control and security camera systems requiring dual voltage rails. It delivers 12A at 12V and 10A at 24V — the right capacity for mid-scale installations where a single 16-door controller feeds multiple readers, maglock arrays, or camera PoE midspans across a building. Install this where you need redundancy built in and simultaneous multi-voltage support without stacking supplies.

Compatibility

The FPO150/250-2C83D8PE8M1/T16-A pairs with access control panels and camera power distribution systems that accept dual-output 12V/24V supplies. Verify your controller's input voltage and amperage rating against the 12A/12V and 10A/24V outputs. The 16-door designation indicates this is sized for systems managing up to 16 independent door circuits or zones. Confirm terminal block pinout matches your existing panel before wiring.

Installation Notes

Mount in a standard electrical enclosure rated for 120/240V AC input (dual input configuration per the model designation). Wire 12V and 24V output rails to separate breaker or fuse protection at 12A and 10A respectively — do not exceed rated amperage per rail. Use the included tie wraps to bundle output leads. Terminate into the destination panel using crimp connectors or terminal blocks rated for the wire gauge. Verify AC input voltage (120 or 240V) matches your site power before energizing.

What's in the Box

• 1x FPO150/250-2C83D8PE8M1/T16-A power supply
• Tie wrap bundle for output cable management