Lifesafety Power FPO150/250-2C83D8PE6M1/T16-A 16-Channel 400W Power Supply
Overview
The FPO150/250-2C83D8PE6M1/T16-A is a 400W, 16-channel power distribution unit designed for commercial access control and surveillance installations. It delivers 12A at 12V DC and 10A at 24V DC across 16 dedicated lockable outputs, eliminating the need for individual power supplies at multiple door controllers, mag locks, and auxiliary devices. This is the core power backbone for medium-to-large installations (hotels, offices, warehouses, multi-building campuses) where centralized, monitored power distribution cuts installation labor and improves fault isolation.
Compatibility
The FPO150/250-2C83D8PE6M1/T16-A integrates with Lifesafety Power ecosystems and works with any 12V or 24V access control reader, magnetic lock, electric strike, motion detector, or auxiliary relay drawing within the 12A/12V or 10A/24V per-channel limits. It is compatible with standard door control modules, credential readers (Wiegand, RS-485, IP), and 24V surveillance camera PoE injectors operating at 24V. Verify individual device current draw against per-channel capacity before deployment.
Installation Notes
Mount in a climate-controlled enclosure (electrical closet, server room, or equipment cabinet). Incoming mains power: 150–250V AC (the model designation reflects input voltage range). All 16 outputs are individually lockable and fused for circuit protection. Wired delivery via standard 1502/MR52 terminals and included tie wraps. Design assumes 24/7 operation; if outdoor mounting is required, verify enclosure IP rating independently — the supply itself is intended for indoor use. Do not exceed 12A or 10A per channel; exceeding limits will trip protection and require manual reset.
What's in the Box
- 1x FPO150/250-2C83D8PE6M1/T16-A 16-channel 400W power supply unit
- 1x Wired connector set (1502/MR52 terminals)
- 1x Tie wrap bundle for cable management
