Lifesafety Power FPO150/250-2C82D8E8M1 12V/24V Relay Lock Power Module

Overview

The FPO150/250-2C82D8E8M1 is a compact relay-based power distribution module designed for access control power supplies and door lock integration in multi-door enterprise installations. It operates in dual-voltage mode—12A at 12VDC or 6A at 24VDC—allowing a single unit to serve different lock types and control architectures without stock-keeping complexity. Use this where you need supervised, relay-switched power output to strike plates, magnetic locks, or electrified latchbolts across multiple zones without deploying individual power supplies per door.

Compatibility

This module is part of the Lifesafety Power access control line and is specified for enterprise panel-mount installations requiring relay-switched distribution. Confirm input voltage and relay contact ratings with your access control panel manufacturer; the dual-voltage design integrates with standard 12V and 24V panel outputs. If you are deploying a multi-door access control system design, verify relay current capacity against total lock amperage on each supervised circuit.

Installation Notes

This is a relay lock module—the output is switching-supervised, not continuously powered. Verify that your access control panel's relay outputs match the FPO150/250-2C82D8E8M1 contact rating before wiring. Confirm the total sustained current draw across all connected locks does not exceed 12A at 12V or 6A at 24V to prevent nuisance relay cycling or thermal shutdown. Mount in a controlled temperature environment; consult the panel documentation for thermal derating if ambient exceeds 40°C. Standard DIN rail or panel-mount hardware is typical for this class of module—confirm mechanical footprint with the installation guide.