Lifesafety Power · FPO75-C4D8E2X

Lifesafety Power FPO75-C4D8E2X 75W (12 or 24V) 4 lock outputs 8

75W compact power supply from Lifesafety Power, configurable for either 12V or 24V operation

• Selectable 12V or 24V output eliminates stocking separate supplies per site.
• Four independent lock outputs eliminate daisy-chaining across separate door circuits.
• Eight auxiliary outputs power sensors, keypads, and indicators from one 75W unit.

Lifesafety Power · FPO75-C4D8PE1M

Lifesafety Power FPO75-C4D8PE1M 75W PS 6A/12V or 3A/24V 4 relay

75W centralized power supply and relay controller designed for distributed access control and door locking infrastructure

• Selectable 12V/6A or 24V/3A output matches lock voltage without extra SKUs.
• Four 3A-fused relay outputs with per-relay FAI, failsafe, or failsecure logic.
• Eight Class 2 aux DC outputs power readers and sensors on Bus1 or Bus2.

Lifesafety Power · FPO75-C4D8PE2M/T4-A

Lifesafety Power FPO75-C4D8PE2M/T4-A Power supply board 75W 6A/1

75W power distribution board designed for access control and security panel integration

• Delivers 75W at 6A/12V or 3A/24V to power locks, readers, and aux devices.
• Pre-wired Mercury harness (1502/MR52) connects to 4-door panels without extra termination.
• Four dedicated lock outputs plus 8 aux channels consolidate multi-door power distribution.

Lifesafety Power · FPO75-C4D8PE4M/T4-B

Lifesafety Power FPO75-C4D8PE4M/T4-B Mercury ProWire Unified Pow

Unified access control power platform combining regulated power distribution, battery backup, relay lock control, and auxiliary load management in a

• 75W, 12V/24V DC regulated output across 12 concurrent access points from one enclosure.
• 4 relay lock outputs with failsafe/failsecure per zone; supports strikes and buzzers together.
• Built-in fire alarm disconnect automatically releases doors for ADA-compliant emergency egress.

Lifesafety Power · FPO75-C4E1

Lifesafety Power FPO75-C4E1 4 Door Access Control 4 Lock Outputs

75W distributed power supply purpose-built for multi-door access control installations where independent lock circuits are non-negotiable

• Four individually fused 3A outputs isolate door circuits, preventing one fault from affecting others.
• 75W budget supports four EM locks or solenoid strikes at 12V or 24V without auxiliary boost.
• DIN-rail E1 enclosure mounts directly in access control cabinets, eliminating extra surface hardware.

Lifesafety Power · FPO75-C4E1-2DM2

Lifesafety Power FPO75-C4E1-2DM2 DMP Unified Power Sys

DMP-integrated power supply and battery management system designed for distributed access control, fire alarm, and intercom deployments across

• 75W output supports 4–6 EM locks with 4 independently fused 3A relay outputs.
• Integrated battery charger and low-battery cutoff eliminate external modules and prevent deep discharge.
• Automatic fire alarm disconnect triggers door unlock for code-compliant emergency egress.

Lifesafety Power · FPO75-C4E2

Lifesafety Power FPO75-C4E2 Power Supply Board 75W

75W unified power supply board designed for access control systems requiring reliable, multi-zone power distribution

• 75W output with 4 relay lock outputs, each fused at 3A for independent zone protection.
• Fire alarm disconnect auto-unlocks doors on alarm signal, supporting life-safety compliance.
• Optional Netlink module enables network monitoring, remote battery testing, and cloud dashboard.

Lifesafety Power · FPO75-C4E2M

Lifesafety Power FPO75-C4E2M Power Supply Board 75W

75W power supply board designed for access control and lock management in small-to-medium commercial installations

• Delivers 6A at 12V or 3A at 24V to power locks, readers, and relays from one board.
• Four relay outputs, each fused at 3A, isolate faults so one shorted lock won't cascade.
• Supports electric strikes, maglocks, and relay-driven door operators in commercial installs.

Lifesafety Power · FPO75-C4PD8PE1

Lifesafety Power FPO75-C4PD8PE1 75W Svps 4 Lock Control Out; 8AUX

75W supervised power supply (SVPS) designed to power and manage distributed access control devices—door locks, strikes, magnetic locks, and auxiliary

• 75W total capacity supports 4 supervised lock control outputs from a single cabinet.
• 8 auxiliary outputs allow monitoring of relays, sensors, and secondary devices.
• Built-in supervision detects wiring faults, power loss, and tamper before doors fail.

Lifesafety Power · FPO75-C4PD8PE1M

Lifesafety Power FPO75-C4PD8PE1M Power supply board 75W 6A/12V

75W board-mount power supply configured for 6A at 12V or 3A at 24V — designed to feed access control systems, door locks, and auxiliary loads in

• Delivers 75W at 6A/12V or 3A/24V to support multi-door access control loads.
• Provides 4 relay lock outputs plus 8 auxiliary DC outputs, each class 2 limited at 2.5A.
• Mercury/Lenel backplate compatibility simplifies retrofit and new-build panel integration.

Lifesafety Power · FPO75-C4PD8PE2M

Lifesafety Power FPO75-C4PD8PE2M Power Supply Board 75w 6A/12V 4

Four-output 12VDC power supply designed to distribute backup power across multiple access control readers, door locks, and small-scale security

• Four independent 12VDC outputs isolate high-current locks from sensitive reader circuits.
• 75W capacity at 6A/12VDC supports multiple access control endpoints from a single board.
• 120VAC input suits standard commercial utility supply for straightforward panel integration.

Lifesafety Power · FPO75-C4PD8PE4M/T4-A

Lifesafety Power FPO75-C4PD8PE4M/T4-A ProWire Pow Sys 75W Single

UL-listed power distribution platform designed for access control and life-safety applications where prewired integration, fault tolerance, and

• 75W at 120V AC powers up to 4 lock outputs plus 8 auxiliary zones in one enclosure.
• Integrated fire alarm disconnect auto-unlocks doors without external relays or wiring.
• Built-in battery charger with low-cutoff protects backup batteries during extended outages.

Lifesafety Power · FPO75-C8D8E2

Lifesafety Power FPO75-C8D8E2 Single Voltage Offline Switchmode

75W single voltage offline switchmode supply engineered for distributed access control loads across 8 independent door circuits

• 8 independently fused 3A lock outputs prevent a single short from cascading to adjacent doors.
• 75W envelope supports 12V @ 6A or 24V @ 3A — covers 3–6 strikes plus readers in one unit.
• 8 additional 3A auxiliary circuits power readers and REX sensors with isolated protection.

Lifesafety Power · FPO75-C8D8E6M1

Lifesafety Power FPO75-C8D8E6M1 75W PS 6A/12V or 3A/24V 8 relay

Regulated 75W AC-to-DC power supply engineered for access control and life-safety door lock systems

• Dual-voltage output (6A/12V or 3A/24V) matches lock hardware without added converters.
• Eight independently fused 3A relay outputs handle failsafe/failsecure per door, no relay panel needed.
• Eight auxiliary DC outputs assignable to Bus1 or Bus2 isolate REX and sensor power from lock rails.

Lifesafety Power · FPO75-C8E1

Lifesafety Power FPO75-C8E1 FPO75-C8E1

75-watt industrial power enclosure designed to distribute regulated 12V or 24V DC power across eight independently fused outputs

• Eight independently fused 3A outputs isolate faults, preventing one failed device from killing the bus.
• Supports 12V or 24V DC distribution up to 75W total across locks, readers, and PoE injectors.
• E1 cabinet mounts in wall or rack environments, suiting IDF closets and comms room deployments.

Lifesafety Power · FPO75-C8E1M

Lifesafety Power FPO75-C8E1M PSB75W 6A/12V or 3A/24V 8 relay loc

75W regulated power supply board designed for access-control and door-lock deployments requiring independent circuit isolation and multi-load

• Eight independently fused 3A relay outputs prevent a single fault from disrupting other circuits.
• Supports 12V (6A) or 24V (3A) operation, eliminating external converters on mixed-voltage sites.
• Pre-installed Mercury/Lenel backplate allows direct cabinet mounting with no custom fabrication.

Lifesafety Power · FPO75-C8E4M

Lifesafety Power FPO75-C8E4M Power supply board 75W 6A/12Vor 3A

75W board-mounted power distribution module designed to serve small-to-medium security deployments that require centralized DC power rather than

• Selectable 12VDC or 24VDC output adapts to endpoint voltage requirements per install.
• 75W budget delivers 6A at 12V or 3A at 24V for cameras, readers, and door strikes.
• Board-mount form factor integrates directly into power cabinets without external housing.

Lifesafety Power · FPO75-C8PD8PE2

Lifesafety Power FPO75-C8PD8PE2 FPO75 Sing Vol Pow Sys Flex Power

Unified access control power supply designed for compact, single-voltage deployments requiring fire alarm integration and multi-zone relay switching

• 75W single-voltage output supports up to 8 relay lock zones at 2.5A Class 2 each.
• FAI input auto-unlocks doors on fire alarm signal with integrated override prevention.
• Wall-mount enclosure (20×16×4.5 in) consolidates power, backup, and surge protection.

Lifesafety Power · FPO75-D8E1V

Lifesafety Power FPO75-D8E1V 2DR Vertx system power 6A/12V 75W

75W auxiliary power supply designed for Vertx access control and security system integration

Lifesafety Power · FPO75-D8E2V

Lifesafety Power FPO75-D8E2V HID Unified Power System

75W unified power supply with integrated battery charger designed for access control, emergency egress, and life-safety door systems

• Eight individually fused 3A auxiliary outputs enable fault isolation per zone.
• Integrated fast-charge battery management eliminates a separate charger in the enclosure.
• Form C fire alarm relay unlocks doors on alarm signal—no add-on relay module needed.

Lifesafety Power · FPO75-D8E4A

Lifesafety Power FPO75-D8E4A Power supply board 75W 6A/12V or 3A

75W power supply board designed to centralize power distribution for small-to-medium IP camera installations and access control systems

• Dual-voltage output (12VDC/6A or 24VDC/3A) supports mixed-voltage deployments from one board.
• 75W board consolidates power distribution for small-to-medium camera and access control systems.
• Voltage is jumper-selected pre-commissioning; confirm endpoint ratings before energizing the board.

Lifesafety Power · FPO75-D8E4V

Lifesafety Power FPO75-D8E4V FPO75-D8E4V

75W auxiliary power distribution enclosure designed to feed secondary circuits in surveillance and access control systems

• Distributes 12V DC across 8 independent fused outputs, protecting each circuit individually.
• 75W / 6A capacity offloads door strikes and sensors from your main camera or NVR PSU.
• E4V enclosure (24×20×4.5 in) mounts on 19-in rack rails or wall in any equipment room.

Lifesafety Power · FPO75-D8PE1M

Lifesafety Power FPO75-D8PE1M Power supply board 75W 6A/12Vor 3A

Compact 75W power supply designed to distribute power to networked security endpoints and control devices across small-to-medium access control and

• Selectable 12VDC/6A or 24VDC/3A primary output supports mixed-voltage deployments.
• Eight 2.5A auxiliary outputs power locks, readers, and RTE sensors from one enclosure.
• 110–240VAC auto-sensing input and individual fused outputs simplify global installation.

Lifesafety Power · FPO75-D8PE2M

Lifesafety Power FPO75-D8PE2M Power supply board 75W 6A/12Vor 3A

Compact 75W power supply designed for distributed camera and access control deployments where a single primary load (6A at 12VDC or 3A at 24VDC) must

• Dual primary voltage (12VDC/6A or 24VDC/3A) suits PTZ heads, encoders, or camera hubs.
• Eight isolated 2.5A auxiliary outputs eliminate separate power rails for cameras or door controllers.
• E2M enclosure with Mercury back plate provides frame grounding and noise isolation at installation.

Lifesafety Power · FPO75-D8PE4H

Lifesafety Power FPO75-D8PE4H Power Supply 75W 6A/12 3A/24 8Aux

75-watt power supply designed to distribute regulated voltage across access control, intercoms, and security endpoint infrastructure in mid-scale

• Dual-voltage output (12VDC/6A and 24VDC/3A) supports mixed-voltage endpoint deployments.
• Eight supervised auxiliary outputs enable centralized, monitored power distribution per channel.
• PTC polyswitch protection self-resets after overcurrent, eliminating fuse replacement on site visits.

Lifesafety Power · FPO75-D8PE4M

Lifesafety Power FPO75-D8PE4M FPO75-D8PE4M

75W auxiliary power supply designed to distribute regulated DC power to multiple surveillance and access-control loads in a single rack or

• Selectable 12V/6A or 24V/3A main output matches your primary load at install.
• Eight independent 2.5A Class 2 auxiliary channels eliminate cascading power failures.
• 75W total capacity supports access-control clusters and sensor arrays in one zone.

Lifesafety Power · FPO75-D8PE4M1

Lifesafety Power FPO75-D8PE4M1 Power supply board 75W 6A/12Vor 3

75W compact power distribution board designed to centralize and manage power delivery to networked IP cameras , access control readers, and allied

• Selectable 12VDC/6A or 24VDC/3A output matches most IP camera and reader requirements.
• Centralized 75W distribution eliminates individual wall transformers at each endpoint.
• Single-board hub simplifies troubleshooting across multi-door or multi-camera deployments.

Lifesafety Power · FPO75-D8PW1M

Lifesafety Power FPO75-D8PW1M 75W Single Voltage 120 VAC 8 Auxil

75W single-voltage power supply rated for 120 VAC input, equipped with 8 auxiliary outputs

• 75W capacity powers up to 8 auxiliary outputs from a single centralized source.
• 120 VAC input integrates directly into standard circuits without additional conversion.
• Eight parallel ports eliminate daisy-chained adapters in camera and access control runs.

Lifesafety Power · FPO75-E1

Lifesafety Power FPO75-E1 75W Svps E1 Cabinet

75W SVPS (Switched-Mode Power Supply) housed in a compact E1 cabinet enclosure

• Dual-voltage output (6A at 12VDC or 3A at 24VDC) supports mixed-device deployments.
• 75W power budget covers up to six 12W cameras plus auxiliary sensors in one unit.
• Compact E1 cabinet enclosure enables wall-mount installation in tight IDF spaces.

Lifesafety Power · FPO75-E1M

Lifesafety Power FPO75-E1M 75W power supply 6A/12V or 3A/24V E1M

Compact 75W power supply designed to feed dual security circuits — typically access control, door locks, IP cameras , and auxiliary loads in

• Dual selectable output — 6A @ 12VDC or 3A @ 24VDC — fits mixed-voltage retrofits.
• 75W total capacity supports two mid-draw endpoints without oversizing the circuit.
• Mercury back plate isolates circuits, reducing ground loops on long or multi-floor runs.

Lifesafety Power · FPO75-E2

Lifesafety Power FPO75-E2 6A/12V Or 3A/24V E2 Enclosure

75W regulated power supply designed for access control systems, alarm panels, and distributed IP security equipment where reliable 12VDC or 24VDC

• Selectable 6A/12V or 3A/24V output eliminates separate SKUs for mixed-voltage sites.
• 75W regulated output sustains main ACU plus multiple readers without brownout risk.
• E2 enclosure fits standard wall-mount and DIN-rail deployments in equipment rooms.

Lifesafety Power · FPO75-E2M

Lifesafety Power FPO75-E2M Mercury/Lnl Backplate In E2 Enclosure

75W auxiliary power supply housed in a compact E2 metal enclosure with Mercury/LNL backplate integration

• 75W power supply with Mercury/LNL backplate integration
• 6A @ 12V or 3A @ 24V output for access control loads
• Compact E2 metal enclosure for door-side install

Lifesafety Power · FPO75-E4M

Lifesafety Power FPO75-E4M Mercury/Lnl Backplate In E4 Enclosure

75W power distribution unit housed in a steel E4 enclosure with Mercury/LNL backplate — the right choice when you need to feed multiple access

• 75W output delivers 6A @ 12V or 3A @ 24V to match field device voltage needs.
• Steel E4 enclosure provides a compact, wall-mounted housing for tidy installations.
• Mercury/LNL backplate simplifies wiring connections for access control deployments.

Lifesafety Power · FPO75-E4S

Lifesafety Power FPO75-E4S Power supply board 75W 6A/12Vor 3A/24

Compact power supply board rated for 75W output, delivering either 6A at 12VDC or 3A at 24VDC

• Delivers 75W output at 6A/12VDC or 3A/24VDC from a single board SKU.
• Board form factor fits cabinet- or wall-mount enclosures where space is limited.
• Dual-voltage output eliminates separate SKUs for mixed 12V and 24V deployments.

Lifesafety Power · FPO75-E5M

Lifesafety Power FPO75-E5M 75W power supply 120 VAC AC Fault &

UL-listed, single-voltage 75W power module engineered for power supply infrastructure in access control deployments

• UL-listed 75W module with field-selectable 12VDC or 24VDC output suits mixed lock deployments.
• Built-in fire alarm disconnect unlocks doors on alarm signal without external relay hardware.
• AC fault and system fault Form C contacts flag low battery, shorts, or blown fuse for fast diagnosis.

Lifesafety Power · FPO75/150-2C82D8E2

Lifesafety Power FPO75/150-2C82D8E2 Power supply board 75W 6A/12

75-watt board-mount power supply designed for distributed power architecture in IP security installations

• Board-mount form factor integrates into custom enclosures and OEM power frames.
• Dual-voltage output—12VDC @ 6A or 24VDC @ 3A—serves mixed device populations from one unit.
• Select 24V mode on long cable runs to reduce voltage drop across extended security zones.