Lifesafety Power FPO75-D8PW1M 75W Single Voltage Power Supply

Overview

The FPO75-D8PW1M is a 75W single-voltage power supply rated for 120 VAC input, equipped with 8 auxiliary outputs. This is a fixed-voltage supply intended for distributed power delivery in surveillance and access control installations where you need to feed multiple devices from a centralized source without the complexity of PoE switching.

The 75W capacity and 8 auxiliary ports make it suitable for small-to-medium camera arrays, door controllers, or mixed-load installations where individual cameras or sensors draw low current and you want to avoid daisy-chaining wall adapters or running separate 12V/24V runs to each device.

Compatibility

The FPO75-D8PW1M is compatible with Lifesafety Power panel systems and third-party surveillance devices that accept its output voltage and connector configuration. Verify exact connector types and voltage requirements (12V or 24V) with your camera or access control device before wiring. The 8 auxiliary ports allow parallel connection to multiple low-current devices, provided the total load does not exceed the 75W budget.

Installation Notes

Confirm input voltage is 120 VAC before connection. The supply requires a standard 120V outlet with adequate circuit protection. Do not exceed the 75W aggregate output load across all 8 ports — oversizing risks thermal shutdown and device damage. Install in a clean, dry environment with adequate ventilation to prevent heat stress. Verify polarity on each auxiliary connector before powering devices.