Showing Results for Power & UPS
-
Save $44.01
Lifesafety Power NPE130-BOXED 0W Single Voltage PoE
- PoE input eliminates dedicated AC runs to remote access control cabinets.
- Selectable 12V or 24V output reduces nuisance lock dropout on power transients.
- Form C fire alarm contact auto-unlocks doors to meet life safety egress code.
Free shipping over $499$130.00 $85.99 Save $44.01 -
Save $33.01
Add to Cart The item has been addedLifesafety Power Nxb-Boxed Flexpower Nlc Nxb
- Supervised output channels report brownout, overcurrent, and breaker faults in real time.
- Dual-input architecture supports AC mains failover, preventing cascading endpoint loss.
- Boxed enclosure includes cable routing and terminal blocks for organized, modular wiring.
Free shipping over $499$98.00 $64.99 Save $33.01 -
Save $18.01
Lifesafety Power RB8-BOXED 8A Aux Relay DPDT Auto VLTG
- DPDT contacts provide two independent 8A switching paths for dual-circuit control.
- Auto voltage sensing (12V/24VDC) eliminates jumper config and reduces field wiring errors.
- Isolated relay contacts protect control panel electronics from load-side transients.
Free shipping over $499$54.00 $35.99 Save $18.01 -
Save $311.01
Lifesafety Power RC150-C16/E 220VAC input Rackmount 150W pwr sup
- 16 independently supervised outputs prevent a single fault from cascading across your install.
- Selectable 12VDC/12A or 24VDC/6A output supports both short-run and long-cable-run deployments.
- FAI supervision and battery backup via R2U board enable proactive alerting before cameras drop.
Free shipping over $499$909.00 $597.99 Save $311.01 -
Save $274.01
Lifesafety Power RC150-C8 Rackmount 150W power supply 12A/12V
- Selectable 12VDC/12A or 24VDC/6A output powers mixed camera and reader deployments.
- 8 supervised outputs with fault detection alert monitoring systems before failures escalate.
- 2U 19-inch rackmount form factor consolidates power alongside switches in standard racks.
Free shipping over $499$799.00 $524.99 Save $274.01 -
Save $416.01
Lifesafety Power RC150/150-C16 Rackmount 150W power supply 12A/1
- Delivers 150W total capacity supporting 12A at 12V or dual 6A channels at 24V DC.
- 2U rackmount form factor fits standard 19-inch racks for organized, centralized distribution.
- Dual RC8 board slots enable stacked battery backup and fault/FAI management for redundancy.
Free shipping over $499$1,214.00 $797.99 Save $416.01 -
Save $325.01
Lifesafety Power RC150B-C8D8 RC150B-C8D8
- Simultaneous 12V@4A and 24V@4A rails eliminate a second PSU for mixed-voltage lock installs.
- 8 dedicated lock channels handle solenoid strikes and mag-locks across up to 8 doors per chassis.
- 8 isolated auxiliary relay outputs free lock channels for egress, door status, and alarm loads.
Free shipping over $499$948.00 $622.99 Save $325.01 -
Save $393.01
Lifesafety Power RC75/150-C16 RC75/150-C16
- 16 independently relay-switched outputs let you control mixed 12V/24V locks from one unit.
- Dual rails (12V@6A and 24V@6A) eliminate external power bricks in multi-zone deployments.
- 1U rackmount form factor consolidates solenoid switching into a single 19-inch rack slot.
Free shipping over $499$1,146.00 $752.99 Save $393.01 -
Save $274.01
Lifesafety Power RD150-16 rack mount DC 12V@12A or 24V@6A with 16
- 16 discrete 12V or 24V outputs eliminate daisy-chaining in multi-door deployments.
- 1U rackmount form factor consolidates egress lock power within a standard cabinet.
- Fixed 150W capacity delivers 12A at 12VDC or 6A at 24VDC to match lock voltage needs.
Free shipping over $499$799.00 $524.99 Save $274.01 -
Save $261.01
Lifesafety Power RD150-8 rack mount DC 12V@12A or 24V@6A with 8
- Dual-voltage output (12V @ 12A or 24V @ 6A) supports mixed-voltage device deployments.
- Eight independent outputs eliminate daisy-chaining across door locks, readers, and control modules.
- 1RU form factor mounts in any standard 19-inch rack for centralized access control power distribution.
Free shipping over $499$763.00 $501.99 Save $261.01 -
Save $393.01
Lifesafety Power RD150/150-16 rack mount DC dual voltage: 12V@12A
- Dual-rail output (12V@12A and 24V@6A) powers mixed-voltage lock hardware from one unit.
- 16 discrete egress lock outputs support door strikes, mag locks, and PTZ relay circuits.
- 1U/2U rackmount form factor fits standard 19-inch security cabinets for centralized deployment.
Free shipping over $499$1,147.00 $753.99 Save $393.01 -
Save $495.01
Lifesafety Power RD150/250-16 Rackmount 150W power supply 12A/12
- Distributes 12VDC or 24VDC across 16 outputs from a single 2RU rack footprint.
- Fused front board isolates each zone, preventing one short from taking down all endpoints.
- Rear board supports battery backup and RD Faults/FAI for supervised, resilient installations.
Free shipping over $499$1,443.00 $947.99 Save $495.01 -
Save $267.01
Lifesafety Power RD250 Rack mount system
- Mounts Lifesafety Power hardware in standard 19-inch rack enclosures.
- Consolidates power distribution and backup units into a single rack footprint.
- Simplifies installation in control rooms, server closets, and security racks.
Free shipping over $499$779.00 $511.99 Save $267.01 -
Save $296.01
Lifesafety Power RD250-16 Rackmount 250W power supply 20A/12V
- 16 individually fused outputs isolate faults, preventing one short from killing adjacent zones.
- Selectable 12VDC/20A or 24VDC/10A rails eliminate external regulators in mixed-voltage deployments.
- 2U rackmount form factor with dual 8-zone front boards simplifies cable routing in dense racks.
Free shipping over $499$864.00 $567.99 Save $296.01 -
Save $276.01
Lifesafety Power RD250-8 rack mount DC 12V at 20A or 24V at 10A
- Selectable 12VDC/20A or 24VDC/10A output matches your lock voltage topology exactly.
- Eight dedicated egress lock outputs eliminate separate relay modules in multi-door deployments.
- Rackmount form factor centralizes power distribution, reducing point-load failures across the rack.
Free shipping over $499$806.00 $529.99 Save $276.01 -
Save $395.01
Lifesafety Power RD250/250 Rackmount 250W power supply 20A/12V
- Delivers 250W across 16 outputs at 12VDC/20A or 24VDC/10A from a single 2U chassis.
- Built-in FAI supervision and battery connections enable centralized fault monitoring and backup.
- Fits standard 19-inch racks at 2U, consolidating mixed-voltage endpoints without extra panels.
Free shipping over $499$1,152.00 $756.99 Save $395.01 -
Save $423.01
Lifesafety Power RD250/250-16 RD250/250-16
- Simultaneous 12V @ 20A and 24V @ 10A rails power mixed-voltage door hardware from one unit.
- 16 relay-switched lock outputs, each rated 2A, eliminate external distribution relay panels.
- Standard 19-inch rackmount form factor installs in any rack without special brackets.
Free shipping over $499$1,234.00 $810.99 Save $423.01 -
Save $219.01
Lifesafety Power RD75-8 Rack Mount DC 12V@6A or 24V@3Aw/8 egress
- Rack-mount form factor fits standard 19-inch infrastructure without adapters.
- Eight dedicated egress outputs eliminate external relay banks for multi-lock runs.
- Dual-voltage design (12VDC/6A or 24VDC/3A) matches common lock hardware specs.
Free shipping over $499$641.00 $421.99 Save $219.01 -
Save $347.01
Lifesafety Power RD75/75-16 150W Dual Voltage Multi OutputRackmou
- Dual 12V/6A and 24V/12A rails power mixed-voltage devices from one 1U chassis.
- 16 individually fused outputs isolate faults so a single trip never drops adjacent zones.
- 150W budget supports up to 12 mag-locks or 16 strikes consolidated in a rack enclosure.
Free shipping over $499$1,012.00 $664.99 Save $347.01 -
Save $528.01
Lifesafety Power RGA75B-C8D8Z Gemini Rack Mount Power Sys RGA75B
- 16 fused 3A outputs (8 relay lock + 8 aux) support mixed 12V/24V lock types per zone.
- UL-listed 3U rack enclosure consolidates dual-voltage power and battery backup in 75W.
- AC/system fault supervision triggers on blown fuse, ground fault, or power supply failure.
Free shipping over $499$1,540.00 $1,011.99 Save $528.01 -
Save $515.01
Lifesafety Power RGA75B-C8Z 75W power supply 6A/12V or 3A/24V 8
- Delivers 75W at 12V/6A or 24V/3A to support mixed-voltage access control loads.
- Eight independently fused 3A relay outputs allow per-channel failsafe or failsecure logic.
- Single-unit backbone eliminates separate stepping converters for 12V readers and 24V locks.
Free shipping over $499$1,502.00 $986.99 Save $515.01 -
Save $484.01
Lifesafety Power RGH-XZ1-BOXED RGH enclosure with a heavy duty
- Heavy-duty frame ships boxed with Z bracket, eliminating separate hardware sourcing.
- Accepts all RGH-series power modules, scaling output circuits as site requirements grow.
- Z bracket supports 1.5–2 inch poles and wall surfaces for flexible field deployment.
Free shipping over $499$1,413.00 $928.99 Save $484.01 -
Save $576.01
Lifesafety Power RGH75B-C8PZ 75W power supply 6A/12V or 3A/24V 8
- Delivers 6A/12VDC or 3A/24VDC from a single 75W supply for flexible lock voltage.
- Eight independently configurable Class 2 relay outputs rated 2.5A each simplify wiring.
- Failsafe or failsecure mode set per channel; external battery input supports backup power.
Free shipping over $499$1,681.00 $1,104.99 Save $576.01 -
Save $775.01
Lifesafety Power RGH75B-C8PZ/T4-C 75W power supply 6A/12V or 3A
- Selectable 12VDC/6A or 24VDC/3A output supports mixed-voltage lock hardware from one unit.
- Eight independently configurable relay outputs at 2.5A each control up to 8 locks simultaneously.
- Per-channel failsafe, failsecure, or FAI logic simplifies fire alarm integration and egress compliance.
Free shipping over $499$2,259.00 $1,483.99 Save $775.01 -
Save $509.01
Lifesafety Power RGL-XZ RGL Drawer and Backplate
- Heavy-duty steel construction ensures secure, long-term mounting in POS and access-control installs.
- Supports both manual and printer-triggered drawer operation for flexible deployment configurations.
- Designed specifically for RGL series hardware, simplifying integration and reducing compatibility risk.
Free shipping over $499$1,486.00 $976.99 Save $509.01 -
Save $962.01
Lifesafety Power RGL250-2D8P2M8PNLCZ1-ORC02 RGL250/250-2D82M8NZ
- 16 individually monitored outputs enable per-circuit fault isolation without a site visit.
- Simultaneous 12VDC and 24VDC rails eliminate separate supplies in mixed-device deployments.
- SNMP support integrates outlet-level control into Nagios, Zabbix, or SolarWinds workflows.
Free shipping over $499$2,805.00 $1,842.99 Save $962.01 -
Save $821.01
Lifesafety Power RGL250-2M8PZ1-ORC03 RGL250-2M8PZ1-ORC03 Gemini
- Centralizes access control and door hardware power into one managed enclosure.
- Dual power inputs with automatic failover eliminate single points of failure.
- DIN rail support simplifies component swaps and incremental capacity expansion.
Free shipping over $499$2,393.00 $1,571.99 Save $821.01 -
Save $885.01
Lifesafety Power RGL250/250/H-2D8Z 2 x 250W power supply 20A/12V
- Two independent 250W channels let you isolate access control from camera loads.
- Select 12VDC/20A or 24VDC/10A per channel to support mixed-voltage endpoints.
- 2U, 19″ rack-mount form factor fits standard EIA enclosures in central security rooms.
Free shipping over $499$2,581.00 $1,695.99 Save $885.01 -
Save $885.01
Lifesafety Power RGL250/250/H-2D8Z/E 250W power supply 20A/12V
- Delivers 250W at 20A/12VDC or 10A/24VDC to power multiple IP cameras from one unit.
- Eight supervised 3A auxiliary outputs route independently across Bus1 or Bus2 for load segmentation.
- 2U rack footprint with Z-bracket wire management fits 19″ cabinets and simplifies dense installs.
Free shipping over $499$2,581.00 $1,695.99 Save $885.01 -
Save $1,162.01
Lifesafety Power RGL250/250/H-2M8PNLCZ1-FB03/E Rackmount 150W pow
- Selectable 12VDC/12A or 24VDC/6A output eliminates duplicate inventory across door hardware specs.
- 8-port managed distribution with 2.5A Class 2 per port removes need for external fuses or breakers.
- 150W total capacity supports 8–16 access-control readers or mixed strike/intercom loads without voltage sag.
Free shipping over $499$3,386.00 $2,223.99 Save $1,162.01 -
Save $582.01
Lifesafety Power RGL75-D8Z 75W power supply 6A/12V or 3A/24V 8
- Eight independently fused 3A outputs centralize DC power for readers, locks, and sensors.
- Field-selectable Bus1/Bus2 per channel supports 6A/12V or 3A/24V without rewiring.
- 2U, 19-inch rack-mount form factor with Z-bracket arm keeps field wiring organized.
Free shipping over $499$1,697.00 $1,114.99 Save $582.01 -
Save $553.01
Lifesafety Power RGM-D8PM8PZ1 8 DC aux oput class 2 pwr ltd.@2.5A
- 8 independent 2.5A class 2 power-limited DC outputs support locks, sensors, and monitors.
- Per-output Bus1/Bus2 selection enables dual-circuit power distribution from a single module.
- 2U rackmount form factor with Z1 articulating wire management simplifies organized panel builds.
Free shipping over $499$1,613.00 $1,059.99 Save $553.01 -
Save $598.01
Lifesafety Power RGM-XZ1-ORC01 RGM-XZ1 Gemini RGM Mercury Integra
- Expands Gemini RGM or Mercury Integra I/O capacity without replacing the primary unit.
- Mounts in any standard 19-inch rack alongside existing IT infrastructure with no extra IP overhead.
- Backplane or ribbon interconnect enables capacity growth with no operational downtime during install.
Free shipping over $499$1,745.00 $1,146.99 Save $598.01 -
Save $510.01
Lifesafety Power RGM150-C4D8PZ Gemini Rack Mount Pwr 150V 120VAC
- 150W rack-mount PDU centralizes AC power for multi-device surveillance and access control.
- 12 segregated outputs (4 lock + 8 auxiliary) enable independent fusing of critical loads.
- Standard 19-inch form factor integrates directly into existing rack enclosures via 120VAC input.
Free shipping over $499$1,487.00 $976.99 Save $510.01 -
Save $520.01
Lifesafety Power RGM150-C8PZ 150W power supply 12A/12V or 6A/24V
- Delivers 150W at 12A/12V or 6A/24V to support mixed lock hardware from one supply.
- Eight 2.5A relay outputs support FAI, failsafe, or failsecure modes per door independently.
- 2U 19-inch rackmount form factor with Z-bracket arm simplifies cable routing in rack deployments.
Free shipping over $499$1,516.00 $995.99 Save $520.01 -
Save $482.01
Lifesafety Power RGM150-D8PZ 4 Door 150W Mercury Single Voltage
- Consolidates power for 4 door-lock circuits into a single 19-inch rack chassis.
- 8 independently fused Class 2 outputs protect readers and sensors from short circuits.
- Field-selectable 12V or 24V DC at shipment reduces commissioning errors on site.
Free shipping over $499$1,405.00 $922.99 Save $482.01
