Extenders & Repeaters
Showing Results for Extenders & Repeaters
-
Add to Cart The item has been addedVeracity
SKU: VHW-HWPS-C2
Veracity VHW-HWPS-C2 HIGHWIRE Powerstar PoE Extender
PoE extender reaches 1000ft to power remote security devices
- Extends PoE+ (802.3at) at up to 5W over coax to 1000ft for remote cameras.
- Runs 100Base-TX at 200 Mbps throughput over RG-59 or RG-11 coax cable.
- Operates from -10 to 50°C and weighs 90g for tight enclosure installs.
$407.50 $321.99 Save $85.51The item has been added -
Add to Cart The item has been addedVeracity
SKU: VHW-HWPS-C4
Veracity VHW-HWPS-C4 Managed PoE Extender
Managed PoE extender regenerates power & signal to 300m for remote cameras
- Extends PoE+ signal and power up to 300m (1000ft) over RG-59/RG-11 coax.
- Managed Layer 2 with VLAN and port mirroring isolates cameras from office traffic.
- Operates from -10 to 50°C, fitting both indoor cabinets and temperature-controlled enclosures.
$448.75 $355.99 Save $92.76The item has been added -
Add to Cart The item has been addedVeracity
SKU: VHW-HWPS-CBB
Veracity VHW-HWPS-CBB HIGHWIRE Powerstar PoE Extender
PoE extender with power regeneration up to 1000 ft on coax cable
- Extends PoE and 100Base-TX Ethernet up to 1000 ft over RG-59/RG-11 coax.
- Regenerates PoE+ (802.3at) power delivery, eliminating separate 24VDC home runs.
- Operates from -10°C to 50°C, supporting both indoor and protected outdoor installs.
$258.25 $204.99 Save $53.26The item has been added -
Veracity
SKU: VHW-HWPS-CXT
Veracity VHW-HWPS-CXT PoE Over Coax Camera Adaptor
- PoE-over-coax camera adaptor for existing 75-ohm BNC runs
- Delivers PoE 802.3af power and 100Base-TX data over coax
- Retrofits IP cameras into legacy analog cable infrastructure
$436.00 $362.99 Save $73.01The item has been added -
Add to Cart The item has been addedVeracity
SKU: VHW-HWPS-ERK4-US
Veracity VHW-HWPS-ERK4-US HIGHWIRE Powerstar Ethernet Extender
Ethernet extender pushes 10/100 Mbps to 300m without repeaters
- Extends 10/100 Mbps Ethernet up to 300m (1100 ft) over Cat5, RG-59, or RG-11.
- Eliminates repeaters and fiber conversion—direct point-to-point run from closet to edge.
- Industrial temperature rating supports outdoor shelters, parking structures, and utility buildings.
$1,536.50 $1,324.99 Save $211.51The item has been added -
Veracity
SKU: VHW-RMPSU-US
Veracity VHW-RMPSU-US HIGHWIRE Ethernet over Coax
Ethernet over coax for surveillance—reuse existing cable runs
- Ethernet over Coax extender for legacy RG-59 cabling
- Industrial-grade operating temperature range
- Reuses existing coax for IP camera retrofits
$84.88 $73.99 Save $10.89The item has been added -
Add to Cart The item has been addedVeracity
SKU: VLS-1N-L
Veracity VLS-1N-L LONGSPAN PoE Extender Media Converter
PoE extender with fiber conversion for long-distance remote cameras
- Extends PoE+ (802.3at) power and data beyond the 100 m Ethernet limit.
- Integrated media converter bridges fiber backbone to copper for remote drops.
- Rack-mountable; pairs with VPSU-xx multi-channel supplies for centralized power.
$279.00 $231.99 Save $47.01The item has been added -
Veracity
SKU: VLS-1N-LC
Veracity VLS-1N-LC HIGHWIRE Longstar LITE Transceiver
- HIGHWIRE Longstar LITE single-channel fibre transceiver
- LC fiber connector for standard cable plant integration
- Point-to-point HIGHWIRE camera fiber transmission
$277.12 $199.99 Save $77.13The item has been added -
Add to Cart The item has been addedVeracity
SKU: VLS-1P-B
Veracity VLS-1P-B PoE Extender
Single-port PoE extender pushes 802.3af/at to 600m range
- Extends 802.3af PoE and 100Base-TX data up to 600m over Cat5e/Cat6.
- 25W PoE budget supports IP cameras, readers, and sensors without AC drops.
- Compact 120×36×23mm form factor installs at rack or remote edge points.
$312.00 $271.99 Save $40.01The item has been added -
Add to Cart The item has been addedVeracity
SKU: VLS-1P-BC
Veracity VLS-1P-BC 4-Port PoE Extender
4-port PoE extender for cameras and devices 150m+ from switch
- Extends PoE and data to 4 independent endpoints up to 600 m from the switch.
- 25 W PoE 802.3af budget supports cameras and access-control readers simultaneously.
- Industrial-rated design handles outdoor mounting and conduit runs on Cat5e/Cat6.
$346.00 $252.99 Save $93.01The item has been added -
Add to Cart The item has been addedVeracity
SKU: VLS-1P-C
Veracity VLS-1P-C LONGSPAN PoE Extender
Single-port PoE extender for IP cameras & access readers 150–250m out
- Regenerates PoE+ (802.3at) power beyond 100 m, eliminating brownouts at 150–250 m endpoints.
- 10/100 Mbps, 200 Mbps bandwidth passes VLAN and QoS tags transparently—no protocol changes needed.
- Single-port, 5.4×2.4×1.1 in form factor rack-mounts and pairs with VPSU-xx redundant power supplies.
$312.00 $271.99 Save $40.01The item has been added -
Add to Cart The item has been addedVeracity
SKU: VLS-1P-CC
Veracity VLS-1P-CC PoE Extender
Extends PoE power and data beyond 100m without extra power supplies
- Extends PoE 802.3af power and data up to 600m (690 ft) over Cat5e/Cat6.
- 25W PoE budget supports IP cameras, access control readers, and intercoms.
- 100Base-TX Fast Ethernet at 200 Mbps eliminates the need for added power drops.
$346.00 $252.99 Save $93.01The item has been added -
Add to Cart The item has been addedVeracity
SKU: VLS-1U
Veracity VLS-1U LONGSPAN PoE Extender SFP Module Switch
24-port SFP switch extends PoE across fiber for remote cameras
- 24 hot-swappable SFP slots support single-mode fiber runs beyond 20 km.
- Regenerates 802.3at+ PoE at the fiber terminus, powering cameras and readers remotely.
- 1U rackmount chassis consolidates fiber termination, switching, and power injection.
$93.56 $82.99 Save $10.57The item has been added -
Veracity
SKU: VLS-IP-B
Veracity Vls-IP-B Longspan Base Unit Poe
- PoE 802.3af longspan base unit for IP surveillance
- Network distribution point for extended deployments
- Redistributes power for daisy-chained edge devices
$312.00 $311.99 Save $0.01The item has been added -
Add to Cart The item has been addedVeracity
SKU: VLS-LS-B8
Veracity VLS-LS-B8 LONGSPAN PoE Extender 12-Port Industrial
12-port PoE extender with SFP fiber options for industrial long-distance
- 12-port 802.3af PoE switch extends power and data to distributed edge devices.
- SFP module design supports fiber uplinks for EMI immunity on long cable runs.
- Industrial operating temperature rating sustains performance in harsh outdoor sites.
$1,337.75 $1,002.99 Save $334.76The item has been added -
Add to Cart The item has been addedVeracity
SKU: VLS-LSM-B
Veracity VLS-LSM-B PoE Extender Industrial 10/100
Passive PoE extender pushes 10/100 networks 150–200m beyond standard limits
- Extends PoE and 10/100 connectivity up to 820m over Cat5e/Cat6 cable.
- Industrial operating range handles unheated enclosures without added thermal hardware.
- 90W PoE++ budget supports high-draw endpoints like PTZ cameras on a single run.
$338.00 $286.99 Save $51.01The item has been added
Extenders & Repeaters
Network extenders and repeaters help extend Ethernet and PoE beyond standard distance limitations, supporting reliable connectivity for remote cameras and edge devices. These solutions are commonly used for long runs, distributed sites, and challenging infrastructure layouts.
Plan Your Deployment
- Distance requirements and cabling limitations
- PoE power delivery and total wattage planning
- Bandwidth needs and device throughput requirements
- Installation environment and enclosure considerations
- Reliability planning and service access
Extenders & Repeaters — Engineering-Grade Network Infrastructure for Commercial Deployments
This category covers 171 working models of extenders & repeaters sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Port count and PoE budget come first. An 8-camera install needs at least 9 ports (cameras + uplink), with PoE budget covering the sum of per-camera PoE class. Account for uplink speed: 1 Gbps uplinks bottleneck under heavy video load on switches with 8+ high-resolution cameras. SFP+ or 10 Gbps uplinks remove that bottleneck on growing sites.
Managed versus unmanaged switches affect troubleshooting and VLAN segmentation. Managed switches (HPE Aruba, Cisco, Netgear ProSAFE M-series) support VLANs, link-aggregation, port mirroring, and SNMP monitoring — essential for any deployment over 16 cameras or with mixed traffic. Unmanaged switches work for small isolated camera networks but limit growth and troubleshooting visibility.
Layer 3 capability (routing, VLAN inter-VLAN routing) becomes important when surveillance, access control, and corporate traffic share the same physical network. Surveillance VLAN isolation is now standard practice — segregate camera traffic from corporate Wi-Fi and guest networks to prevent broadcast storms and lateral attack paths. Confirm the switch supports the VLAN count and ACL complexity you need.
Outdoor/industrial deployments need ruggedized switches. ComNet, Antaira, and Moxa make hardened switches rated for -40°C to +75°C, vibration, and waterproof housings. DIN-rail mounting fits standard outdoor enclosures. Standard data-closet switches in outdoor enclosures fail within 1-2 years from condensation and temperature swings; spec the right environment rating up front.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| IP Rating | IP66 |
| Connectivity | Wired |
| Power | PoE, PoE+, AC/DC, PoE++ |
| Type | Switch, PoE Extender, PoE Injector, Ethernet Extender, Power Supply, Media Converter, Adapter, Enclosure |
| Durability | Indoor, Outdoor |
Top Brands in This Category
Frequently Asked Questions
What's the difference between managed and unmanaged PoE switches?
Unmanaged switches power-on and forward traffic without configuration — simplest deployment but no VLAN, no monitoring, no troubleshooting visibility. Managed switches add VLANs, link-aggregation, port mirroring, SNMP, and remote-management interfaces. For deployments above 16 cameras or those sharing infrastructure with other systems, managed is the right choice; the per-port cost is modest and the operational benefit is large.
How much PoE budget should I size for?
Sum the PoE-class budget of all PoE-powered devices, then add 20-30% headroom for growth. Eight 802.3at cameras at 30W max each is 240W minimum — but a 130W-budget 8-port PoE+ switch can't deliver that. Confirm both per-port budget and total PoE budget; many entry-level switches advertise PoE+ ports but cap aggregate budget at half the per-port maximum.
Do I need 10 Gbps uplinks?
For installations under 32 cameras with mid-resolution streams, 1 Gbps uplinks suffice. Above that, or when you need fast investigative playback for many simultaneous reviewers, 10 Gbps (SFP+) uplinks remove the choke point. NVRs writing to NAS over the network also benefit. SFP+ has become reasonably affordable on managed switches; opt for it on new installs over 16 cameras.
Can I run VoIP and video on the same switch?
Yes — modern managed switches use VLAN segregation to keep VoIP, video, and data traffic separated even on shared physical ports. Use QoS (Quality of Service) to prioritize VoIP for low latency and assign video its own queue. Avoid mixing untagged traffic types on a single switch port without VLAN configuration; broadcast storms and bandwidth competition cause both voice and video quality issues.
What's the right uplink between buildings on a campus?
Single-mode fiber for runs over 100 m, multi-mode for shorter runs (typically up to 550 m on OM3, 300 m on OM4 at 10 Gbps). Bidirectional SFPs (single fiber instead of pair) save fiber count when the run is already deployed. Avoid copper between buildings — ground-potential differences during lightning strikes destroy switch SFP modules even when surge-protected.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.