Installation Hardware & Kits
Sub categories
Showing Results for Installation Hardware & Kits
-
Ubiquiti
SKU: UACC-RACK-PANEL-BLANK-2U
Ubiquiti UACC-RACK-PANEL-BLANK-2U Rack mount 2U blank panel
2U blank panel for 19-inch racks, airflow and cable management
- Fills 2U of unused rack space, blocking air bypass paths that degrade cooling.
- Fits any standard 19-inch rack without power or cabling — purely mechanical install.
- SPCC cold-rolled steel with gray finish blends into mixed-equipment network cabinets.
$53.99The item has been added -
Ubiquiti
SKU: UACC-RACK-PANEL-BRUSH-1U
Ubiquiti UACC-RACK-PANEL-BRUSH-1U Rack mount 1U brush panel
1U rack brush panel for 19-inch EIA cable management
- 1U form factor fits standard 19-inch EIA racks, minimizing vertical space consumption.
- Cold-rolled carbon steel and aluminum alloy construction provides durable long-term support.
- Brush panel design routes cables cleanly while maintaining rack airflow and organization.
$72.99The item has been added -
Ubiquiti
SKU: UACC-READER-PRO-JB-B
Ubiquiti UACC-READER-PRO-JB-B Junction box for Readers
Junction box for UniFi Reader Pro access control installations
- Purpose-built for UniFi Professional Access Readers and UniFi Doorbells.
- Supports flat-surface mounting or standard 3/4" conduit attachment for flexible installs.
- Centralizes wiring consolidation, protecting terminations from direct weather exposure.
$30.00 $29.99 Save $0.01The item has been added -
ACTi
SKU: BT-NEWMIC
ACTi Bluetooth Microphone Array FOR Q & Z Series - BT-NEWMIC
- Four directional mics deliver 360° coverage, eliminating audio dead zones in any room layout.
- Bluetooth or USB Type-C dual-mode connection enables fast, cableless deployment on ACTi Q/Z displays.
- Built-in echo cancellation and noise reduction keep speech intelligible during live calls or recordings.
$449.00 $247.99 Save $201.01The item has been added -
ACTi
SKU: CTS-CS100-BTWC
ACTi Conference Speaker/microphone - CTS-CS100-BTWC
- Six-array omnidirectional mic captures voices across a 3–6 ft radius without repositioning.
- Bluetooth plus USB dongle support integrates with laptops, tablets, and standard VMS audio inputs.
- Wireless and USB charging with 8-hour talk time supports mobile and temporary deployment scenarios.
$199.00 $176.99 Save $22.01The item has been added -
ACTi
SKU: PMIC-0100
Acti PMIC-0100 Active Omnidirectional Microphone
360° omnidirectional microphone for Acti IP cameras, PoE powered
- Omnidirectional pickup captures audio across 360 degrees for multi-directional monitoring
- PoE (802.3af) power eliminates separate cables and simplifies network integration
- Line-in audio support connects external audio sources to Acti camera systems
$114.00 $113.99 Save $0.01The item has been added -
ACTi
SKU: CTS-RM100-USBA
ACTi Whole Room Microphone Array - CTS-RM100-USBA
- Ceiling-mounted omnidirectional array covers rooms up to 25×20 ft with no dead zones.
- Automatic beamforming tracks active speakers and suppresses ambient noise without reconfiguration.
- Single USB connection simplifies cabling; supports ceiling and standard 19-inch rack mounting.
$449.00 $398.99 Save $50.01The item has been added -
Aiphone
SKU: GTW-LC
Aiphone GTW-LC Multi-Relay Control Unit
20-relay control unit for GT Series intercoms and access doors
- Multi-relay control unit with 20 programmable outputs
- Wall-mount for Aiphone GT series intercom integration
- Flexible auxiliary device + access control switching
$514.00 $276.99 Save $237.01The item has been added -
Aiphone
SKU: IME-100
Aiphone IME-100 Gooseneck Microphone for IM System
Gooseneck mic for Aiphone IM intercom systems at service windows
- Gooseneck microphone with direct OU-100 attachment
- -46dB sensitivity optimized for close-range voice
- No separate audio cable runs required
$326.00 $175.99 Save $150.01The item has been added -
Add to Cart The item has been addedAiphone
SKU: MC-A/A
Aiphone MC-A/A MarketCom Paging Adaptor
Multi-tenant paging adaptor for Aiphone MarketCom systems
- MarketCom paging adaptor for multi-tenant deployments
- Integrates with existing MarketCom system architecture
- Wall or pole mount for residential commercial use
In stock · Ships same business day$218.00 $217.99 Save $0.01The item has been added -
Add to Cart The item has been addedAiphone
SKU: MCW-S/B
Aiphone MCW-S/B Desk Stand Adjustable
Adjustable desk stand for Aiphone intercoms; wall, ceiling, pole mount
- Adjustable desk stand for master and handset stations
- Repositions intercom for operator ergonomics
- 0.5 lb US-made desk-mount accessory
In stock · Ships same business day$42.00 $41.99 Save $0.01The item has been added -
Aiphone
SKU: NI-SB
Aiphone NI-SB Ceiling Mount Microphone
Ceiling flush-mount microphone for hands-free intercom transmission
- Ceiling-mount stainless steel microphone sub-station
- Hands-free transmit for intercom installations
- UL-listed for institutional ceiling cavity install
$84.00 $83.99 Save $0.01The item has been added -
Aiphone
SKU: PD-2
Aiphone PD-2 Paging/Talkback Adaptor
Paging/talkback adaptor for TB-H/TD-H handsets with auto music mute
- Paging/talkback adapter for TD-H and TB-H/B handsets
- Connects handset stations to overhead PA systems
- 2- and 3-conductor shielded wiring support
$280.00 $279.99 Save $0.01The item has been added -
Aiphone
SKU: RY-AC/A
Aiphone RY-AC/A Call Extension Relay
Call extension relay for multi-zone Aiphone intercom systems
- Call extension relay for multi-station routing
- Wall, pole, or rack mount distribution module
- Eliminates single-point-of-failure communication
$80.00 $79.99 Save $0.01The item has been added -
Add to Cart The item has been addedAiphone
SKU: RY-ES
Aiphone RY-ES External Signaling Relay
Dry contact relay triggers sirens and strobes from Aiphone master stations
- External signaling relay, 125VAC @ 1A or 30VDC @ 1A
- Drives alarm sirens, strobes, or control relays
- 0.35 lb US-made wall or rack-mount module
In stock · Ships same business day$102.00 $101.99 Save $0.01The item has been added -
Altronix
SKU: 6030
Altronix 6030 Programmable Timer Relay Module
Programmable timer relay, 1-second to 60-minute range, 6/12VDC input
- Single SPDT relay output rated 8A/120VAC or 28VDC for siren cutoff and dialer delay
- Repeat mode for pulse/flasher operation; guard tour supervisory timer capable
- Low 3mA standby draw, compact 3" × 2.5" board, -25°C to 55°C operating range
$25.09 $24.99 Save $0.10The item has been added
Installation Hardware & Kits
Installation hardware and kits provide the job-ready components needed to mount, secure, and complete commercial surveillance, access control, and intercom deployments. Standardizing installation parts helps speed up installs and supports consistent long-term serviceability.
Plan Your Deployment
- Mounting surface type and hardware compatibility
- Indoor vs outdoor durability requirements
- Standardization across sites and install teams
- Serviceability and replacement part planning
- Project staging and kit-based installation efficiency
Installation Hardware & Kits — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 48 working models of installation hardware & kits sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 5MP, 20MP+, 2MP, 8MP |
| IP Rating | IP68, IP56 |
| Connectivity | Wired |
| Power | PoE |
| Type | Controller, Station Adaptors, LED Beacon/Strobe, Custom/Special Order Unit, Accessories, Lock/Strike, Relays and Control Units |
| Night Vision | Yes |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.