Covers & Protection
Sub categories
Showing Results for Covers & Protection
-
Geovision
SKU: 84-HOUG101-0001
Geovision 84-HOUG101-0001 Housing Box IP67
- IP67 rating seals against dust and 1m submersion, blocking moisture-induced corrosion.
- Houses PoE injectors, surge protectors, and terminal blocks in one weatherproof compartment.
- Consolidated outdoor cable termination reduces field-side RJ45 and power connection failures.
$154.00 $153.99 Save $0.01The item has been added -
Geovision
SKU: 84-HOUG102-0001
Geovision 84-HOUG102-0001 Camera Housing
- IP66 and IK10 ratings handle washdown, salt spray, and vandalism without failure.
- Supports varifocal IP PTZ cameras up to 8MP for high-detail outdoor coverage.
- Single PoE (802.3af) run powers the camera—no separate power cable required.
$198.41 $197.99 Save $0.42The item has been added -
Geovision
SKU: 84-HOUG103-002U
Geovision 84-HOUG103-002U Box Housing with IR
- Integrated IR illuminators extend PTZ coverage in low-light and nighttime conditions.
- PoE connectivity simplifies cabling by delivering power and data over a single run.
- Box enclosure shields Geovision IP PTZ cameras from rain, dust, and UV exposure outdoors.
$519.65 $330.99 Save $188.66The item has been added -
Geovision
SKU: GV-HOUSING
Geovision GV-HOUSING Compact IP Sensor Housing
Compact IP housing for GV-IPSH30 series cameras with PoE
- PoE 802.3af eliminates separate power supplies, simplifying single-cable installation.
- H.265/H.264 compression reduces storage overhead versus Motion-JPEG in multi-channel deployments.
- ONVIF support and GV-Center V2 compatibility enable centralized management across up to 800 channels.
$288.99 $280.99 Save $8.00The item has been added -
Geovision
SKU: GV-HOUSING102
Geovision GV-HOUSING102 Vandal-Resistant Housing
IP66/IK10 vandal housing for 8MP varifocal PTZ cameras
- IP66 and IK10 ratings protect PTZ optics against high-pressure water jets and 20J impacts.
- Supports 8MP varifocal PTZ operation via PoE 802.3af—no separate power circuit required.
- ONVIF-compliant pass-through preserves full pan-tilt-zoom function without signal degradation.
$154.00 $149.99 Save $4.01The item has been added -
Geovision
SKU: GV-HOUSING103
Geovision GV-HOUSING103 IR Housing Box
Weatherproof IR housing box for IP PTZ cameras, 24/7 surveillance
- Integrated IR illumination enables 24/7 outdoor monitoring without separate lighting hardware.
- ONVIF-compliant PTZ support allows drop-in integration across multi-vendor VMS environments.
- Outdoor-rated enclosure ships with a 3-year warranty; powers via single PoE 802.3af cable.
$347.99 $338.99 Save $9.00The item has been added -
Geovision
SKU: GV-VD123
Geovision GV-VD123 VD123 Housing Smoke Cover IK07
IK07 vandal-resistant smoke cover housing for Geovision VD123 domes
- IK07-rated housing withstands blunt-force impacts, protecting optics in high-traffic zones.
- IP67 ingress protection supports outdoor deployment in rain, dust, and extreme temperatures.
- Smoked cover reduces glare and reflections while preserving Day/Night IR 850nm performance.
$31.99The item has been added -
Hanwha
SKU: SLM-5M12
Hanwha 12MM Lens FOR Mono BCR Cameras - SLM-5M12
- 12mm fixed lens for Hanwha mono BCR camera systems
- 5MP resolution capture without optical degradation
- NDAA compliant for federal facility procurement
$300.00 $195.99 Save $104.01The item has been added -
Hanwha
SKU: SLM-5M16
Hanwha 16MM Lens FOR Mono BCR Cameras - SLM-5M16
- 16mm fixed-focus lens for Hanwha mono box camera readers
- Narrow FOV optimized for LPR lanes and credential gates
- C/CS-mount compatible for plug-in installation
$300.00 $195.99 Save $104.01The item has been added -
Hanwha
SKU: SLM-5M06
Hanwha 6MM Lens FOR Mono BCR Cameras - SLM-5M06
- 6mm fixed lens for Hanwha mono BCR cameras
- Optimized for medium-range barcode capture distances
- NDAA compliant for federal facility procurement
$300.00 $195.99 Save $104.01The item has been added -
Hanwha
SKU: Z7204161901A
Hanwha 70_COVER_GLASS Requires $15 Shipping Fee - Z7204161901A
- 70mm OEM cover glass replacement for Hanwha dome cameras
- Maintains original IP rating after field replacement
- Optical-grade material preserves image clarity
$32.00 $31.99 Save $0.01The item has been added -
Hanwha
SKU: AM03-021680G
Hanwha AM03-021680G Assembly Cover Top
OEM assembly cover top housing for Hanwha QNV-6012R cameras
- Assembly cover top for the Hanwha QNV-6012R dome
- OEM replacement maintains camera equipment integrity
- Direct-fit spare for vandal-resistant indoor cameras
$53.71 $52.99 Save $0.72The item has been added -
Hanwha
SKU: AM07-002530M
Hanwha AM07-002530M Case Top Assembly
OEM case top assembly for SNV-6084R enclosure replacement
- Direct-fit replacement for SNV-6084R surveillance housing
- Ivory finish maintains aesthetic consistency with Hanwha enclosures
- Genuine OEM part for field technicians and system integrators
$102.96 $101.99 Save $0.97The item has been added -
Hanwha
SKU: AM07-004492S
Hanwha AM07-004492S Case Top Assembly
OEM case top assembly for QNV-8081R with IP67 environmental sealing
- Precision-manufactured housing restores moisture, dust, and temperature resistance
- Direct replacement for QNV-8081R WiseNet HC maintains structural integrity
- IK10 impact rating and outdoor-rated design for demanding field deployments
$77.55 $76.99 Save $0.56The item has been added -
Hanwha
SKU: AM07-004492X
Hanwha AM07-004492X Case Top Assembly
OEM case top assembly for QNV-8081R housing replacement
- Genuine Hanwha component designed for QNV-8081R camera enclosure
- White case top assembly maintains proper environmental sealing
- Direct replacement part for maintenance and system reconfiguration
$61.05 $60.99 Save $0.06The item has been added -
Hanwha
SKU: AM07-004782A
Hanwha AM07-004782A SNP-Series PTZ Dome Cover
Transparent dome cover for SNP-Series PTZ cameras with outdoor weather protection
- UV-resistant polymer construction shields optics and mechanisms from rain, snow, and dust
- Full pan-tilt-zoom range preserved with transparent dome design for unobstructed video
- Drop-in accessory fits SNP-Series PTZ cameras without installation complexity
$118.51 $117.99 Save $0.52The item has been added
Covers & Protection
Covers and protective enclosures safeguard cameras, intercom devices, and other security equipment from weather exposure, tampering, and accidental damage. Proper protection extends device lifespan and helps maintain consistent system performance in demanding environments.
Plan Your Deployment
- Indoor vs outdoor exposure and weather rating requirements
- Vandal-resistant and impact protection needs
- Compatibility with specific device models
- Mounting method and clearance considerations
- Maintenance access and long-term durability planning
Covers & Protection — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 250 working models of covers & protection sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 4MP, 2MP, 20MP+, 6MP |
| IP Rating | IP66 |
| Connectivity | Wired |
| Power | PoE+, PoE |
| Type | Lock/Strike, Intercom, Controller, Accessory, Reader, Printer, Dome, Thermal |
| Night Vision | Yes |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.