Refine by

No filters applied

Door Controllers

Door controllers manage door inputs and outputs, enforce access rules, and connect readers, locks, and sensors to your broader access control platform. Choose controllers based on door count, expansion needs, and integration requirements for reliable commercial deployments.

Plan Your Deployment

Door count today and planned expansion capacity
Controller topology (single-door vs multi-door panels)
I/O requirements (REX, door contacts, auxiliary relays)
Power planning for locks and connected devices
Network connectivity and cybersecurity requirements

Get Recommendations Control Systems

Showing Results for Door Controllers

Compare

Out of stock
Kantech

SKU: KT-2-M

Kantech KT-2-M Two-Door IP Access Controller

Two-door IP controller with PoE power and ONVIF VMS integration
Special Order · Ships in 2-3 weeks

$1,815.00 $1,333.99 Save $481.01

Add to Cart
The item has been added
Free shipping over $499

$1,815.00 $1,333.99 Save $481.01

Add to quote Compare
Compare

Out of stock
Kantech

SKU: KT-2-PCB

Kantech KT-2-PCB Two-Door IP Controller PCB

Two-door IP controller on PoE 802.3af for enterprise access control
Special Order · Ships in 2-3 weeks

$1,717.00 $1,261.99 Save $455.01

Add to Cart
The item has been added
Free shipping over $499

$1,717.00 $1,261.99 Save $455.01

Add to quote Compare
Compare

Out of stock
Kantech

SKU: KT-4DE2

Kantech KT-4DE2 Unified Power Enclosure

Unified power enclosure for 1–4 door access control with IP67 protection
Special Order · Ships in 2-3 weeks

$950.00 $769.99 Save $180.01

Add to Cart
The item has been added
Free shipping over $499

$950.00 $769.99 Save $180.01

Add to quote Compare
Compare

Out of stock
Kantech

SKU: KT-4DNE2

Kantech KT-4DNE2 Unified Power Network Enclosure

Unified power & network enclosure for 1–4 door access control
Special Order · Ships in 2-3 weeks

$1,400.00 $1,133.99 Save $266.01

Add to Cart
The item has been added
Free shipping over $499

$1,400.00 $1,133.99 Save $266.01

Add to quote Compare
Compare

Out of stock
Kantech

SKU: KT-8DE4

Kantech KT-8DE4 8-Door Unified Power Enclosure

8-door unified power enclosure with PoE support and IP67 protection
Special Order · Ships in 2-3 weeks

$1,450.00 $1,174.99 Save $275.01

Add to Cart
The item has been added
Free shipping over $499

$1,450.00 $1,174.99 Save $275.01

Add to quote Compare
Compare

Out of stock
Kantech

SKU: KT-BATT-12

Kantech KT-BATT-12 12V 7Ah Rechargeable Battery

12V 7Ah sealed lead-acid battery for Kantech access control backup
Special Order · Ships in 2-3 weeks

$43.00 $42.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$43.00 $42.99 Save $0.01

Add to quote Compare
Compare

Out of stock
Kantech

SKU: KT-CON

Kantech KT-CON Removable Terminal Block Spare Kit

Tool-free removable terminal block for Kantech KT-4, KT-2, KT-400
Special Order · Ships in 2-3 weeks

$167.00 $117.99 Save $49.01

Add to Cart
The item has been added
Free shipping over $499

$167.00 $117.99 Save $49.01

Add to quote Compare
Compare

Out of stock
Kantech

SKU: KT-IT100

Kantech KT-IT100 Power Series Integration Module

Connect DSC Power Series panels to IP networks via PoE
Special Order · Ships in 2-3 weeks

$233.00 $171.99 Save $61.01

Add to Cart
The item has been added
Free shipping over $499

$233.00 $171.99 Save $61.01

Add to quote Compare
Compare

Out of stock
Kantech

SKU: KT-LOCK

Kantech KT-LOCK Cabinet Lock with Keys

Mechanical keyed cabinet lock for Kantech access control enclosures
Special Order · Ships in 2-3 weeks

$60.00 $44.99 Save $15.01

Add to Cart
The item has been added
Free shipping over $499

$60.00 $44.99 Save $15.01

Add to quote Compare
Compare

Out of stock
Kantech

SKU: KT-MOD-CAB

Kantech KT-MOD-CAB Expansion Module Cabinet

Expansion cabinet for Kantech KT-400 systems, factory pre-configured
Special Order · Ships in 2-3 weeks

$336.00 $246.99 Save $89.01

Add to Cart
The item has been added
Free shipping over $499

$336.00 $246.99 Save $89.01

Add to quote Compare
Compare

Out of stock
Kantech

SKU: KT-MUL-MT-KP2

Kantech KT-MUL-MT-KP2 Multi-Technology Mullion Reader

Dual-frequency mullion reader with keypad for mixed-credential access control
Special Order · Ships in 2-3 weeks

$740.00 $543.99 Save $196.01

Add to Cart
The item has been added
Free shipping over $499

$740.00 $543.99 Save $196.01

Add to quote Compare
Compare

Out of stock
Kantech

SKU: KT-MUL-MT2

Kantech KT-MUL-MT2 Gen 2 Multi-Technology Mullion Reader

Dual-frequency mullion reader with PoE power for mixed credential systems
Special Order · Ships in 2-3 weeks

$400.00 $281.99 Save $118.01

Add to Cart
The item has been added
Free shipping over $499

$400.00 $281.99 Save $118.01

Add to quote Compare
Compare

Out of stock
Kantech

SKU: KT-MUL-SC-KP2

Kantech KT-MUL-SC-KP2 Smart Card Mullion Reader

13.56 MHz smart card reader with keypad for mullion-mount access control
Special Order · Ships in 2-3 weeks

$570.00 $418.99 Save $151.01

Add to Cart
The item has been added
Free shipping over $499

$570.00 $418.99 Save $151.01

Add to quote Compare
Compare

Out of stock
Kantech

SKU: KT-SG-SC-KP2

Kantech KT-SG-SC-KP2 Smart Card Reader with Keypad

Smart card + PIN reader for single-gang wall mount access control
Special Order · Ships in 2-3 weeks

$570.00 $418.99 Save $151.01

Add to Cart
The item has been added
Free shipping over $499

$570.00 $418.99 Save $151.01

Add to quote Compare
Compare

Add to Cart The item has been added
Kantech

SKU: KT-SG-SC2

Kantech KT-SG-SC2 Smart Card Reader Single Gang

Single gang smart card reader, 13.56 MHz contactless with ISO 14443A/B
Special Order · Ships in 2-3 weeks

$300.00 $220.99 Save $79.01

Add to Cart
The item has been added
Free shipping over $499

$300.00 $220.99 Save $79.01

Add to cart Add to quote Compare
Compare

Out of stock
Kantech

SKU: KT-SIG-20TKS-02

Kantech KT-SIG-20TKS-02 HID Signo 20 Mullion Reader

Mullion reader for glass doors; reads HID proximity, MIFARE, NFC
Special Order · Ships in 2-3 weeks

$450.00 $364.99 Save $85.01

Add to Cart
The item has been added
Free shipping over $499

$450.00 $364.99 Save $85.01

Add to quote Compare

Browse by Product Family

Click through to shop the families that fit your door controllers deployment.

Single-Door Controllers

Compact controllers managing one door with reader integration, electric strike/mag lock output, and sensor inputs. Ideal for small deployments, retrofits, and standalone secured entries.

Multi-Door Controllers (2–4 Doors)

Mid-scale controllers handling 2 to 4 doors with shared access logic, expansion I/O, and networked credential validation. Standard choice for office buildings, retail, and small facilities.

Scalable & Enterprise Controllers (4+ Doors)

High-capacity controllers supporting 4+ doors, modular I/O expansion, advanced rule engines, and seamless integration with central access management platforms. Built for large campuses and complex security policies.

IP & Network-Based Controllers

Native Ethernet/PoE controllers eliminating dedicated serial lines, enabling remote management, firmware updates, and real-time audit logs. Reduce cabling costs and scale across distributed sites.

Hybrid & 12V Power Controllers

Controllers supporting legacy 12V DC power supplies or dual power modes for retrofitting existing systems. Backward-compatible with older readers, locks, and wiring infrastructure.

Mobile & Cloud-Ready Controllers

Controllers with mobile app support, cloud credential sync, and offline cache for continuous operation during network loss. Ideal for distributed retail, hospitality, and multi-location deployments.

What to Look For When Buying

The decisions that matter most before you spec.

Door Count & Expansion Roadmap

Start with your current secured entry count, then plan for 12–24 month growth. Single-door controllers cannot scale; multi-door or modular controllers with I/O expansion slots protect capex and reduce installation labor. Access hubs and controllers offer centralized credential management if you're expanding across multiple buildings.

Network Topology & Cabling Cost

IP and PoE-based controllers eliminate 2-pair RS-485 or RS-232 serial runs, lowering installation time and material cost in new construction. If retrofitting, door hardware and I/O modules can adapt legacy serial controllers to newer systems without full replacement. Review your network resilience—why surveillance networks collapse at the core applies equally to access control uplinks.

Reader & Lock Integration

Ensure the controller's input/output format matches your card readers (Wiegand, RS-485, IP) and lock actuators (fail-safe/fail-secure relay outputs, electric strikes, mag locks). Card readers and door locks and strikes vary widely in voltage and signal protocol; mismatch delays deployments and creates support burden.

Offline & Failsafe Behavior

Controllers with onboard credential caches and local time-zone rules continue enforcing access during network or server loss—critical for life-safety and business continuity. Check battery backup duration, failsafe lock behavior (remain locked vs. unlock), and audit trail storage limits. Why surveillance systems fail during incidents highlights the cost of connectivity assumptions.

Power Supply & PoE Budget

PoE controllers (802.3af/at) simplify cabling but consume 5–15W per door; calculate total current draw across all controllers on your PoE switch to avoid overload. Non-PoE controllers require dedicated 12V or 24V supplies sized for peak lock current (300–500mA per strike). PoE budget planning methodology applies here.

Brand Ecosystem & Firmware Support

Kantech, Axis, Honeywell, and Geovision dominate enterprise door control; ensure your systems integrator is factory-trained and your controller's firmware receives monthly security patches. Legacy or white-label controllers may lack vendor support after 5 years, risking stranded infrastructure.

Technology Stack

The specs and acronyms that actually affect door controllers performance.

Wiegand & RS-485 Readers

Wiegand is a legacy two-wire reader protocol (data + ground) supplying 26–37 bit card ID; RS-485 is multi-drop serial for longer runs and higher capacity. Most modern controllers support both; verify pin compatibility and termination resistor requirements before ordering readers and controllers together.

Relay Outputs & Lock Control

Controllers drive locks via form-C relays (normally open, closed, or changeover contacts). Strikes draw 300–500mA at 12V; mag locks draw 400–1000mA. Undersized relay contacts or power supplies cause lock chatter, shortened solenoid life, and failed entry attempts during peak occupancy.

Credential Cache & Offline Operation

On-board flash memory stores 10,000–100,000 card ID / PIN combinations, allowing door unlock during network outage. Cache refresh rate (seconds to minutes) and conflict resolution (deny vs. allow on sync loss) are critical for retail and hospitality multi-location rollouts.

PoE+ & Power Class Negotiation

802.3af supplies 15.4W max; 802.3at (PoE+) supplies 30W. Dual-port controllers and mag locks require PoE+. Controllers negotiate power class on link-up; older switches may not allocate PoE+ on all ports, requiring per-port configuration or high-power injectors.

Audit Log & Tamper Detection

Controllers log access events (card ID, timestamp, granted/denied) to onboard flash or to a remote server. Tamper switches on the enclosure detect physical tampering; critical for regulated facilities (healthcare, finance). Verify log capacity (1,000–1,000,000 events) and export format (CSV, syslog, API).

Time Synchronization & Scheduling

NTP or local RTC (real-time clock) ensures consistent audit timestamps across doors. Controllers enforce time-based access rules (office hours, after-hours, day-of-week). Battery-backed RTC maintains schedule during power loss; check battery life expectancy and replacement ease.

Typical Deployment Scenarios

Small Office (1–2 Doors)

Single IP-based door controller with integrated PoE power, Wiegand reader input, and fail-safe strike relay. Add a cloud-ready access hub for mobile unlock and audit visibility; no on-site server needed. Total cost: $800–$1,500 including reader and lock.

Retail Multi-Location (5–10 Doors per Site)

Multi-door controller (4 doors) + I/O expansion module at each location, syncing credentials via Geovision or Honeywell cloud platform. Local cache enables offline operation during HQ internet loss. Scale to 20+ locations by daisy-chaining controllers over Ethernet.

Campus or Government Facility (50+ Doors)

Enterprise controller cluster (8+ controllers) with central control systems platform, active-passive failover, and distributed credential server. Integrate card readers with biometric backup at high-security zones. Audit trail: 10+ million events, archived monthly to video storage or SIEM.

Retrofit to IP (Legacy Serial Readers)

Existing 26-bit Wiegand readers and 12V mag locks fed through new Kantech IP controller with Ethernet uplink. Door I/O modules translate old cabinet wiring to modern controllers; no reader or lock replacement. Preserve 70% of cabling investment while gaining cloud access and failover.

Top Brands for Door Controllers

Click through to each brand for engineering profile and NDAA compliance status.

Kantech

Authorized dealer · browse the full Kantech catalog for this category

Axis

Authorized dealer · browse the full Axis catalog for this category

Honeywell

Authorized dealer · browse the full Honeywell catalog for this category

Geovision

Authorized dealer · browse the full Geovision catalog for this category

Hikvision

Authorized dealer · browse the full Hikvision catalog for this category

Speco Technologies

Authorized dealer · browse the full Speco Technologies catalog for this category

Frequently Asked Questions

What's the difference between a door controller and an access hub?

Door controllers manage individual door(s)—reader input, lock output, sensor logic—and sit in or near the door frame or in a local cabinet. Access hubs are centralized appliances managing multiple controllers, enforcing credential policy, and syncing with a cloud or on-premise server. Start with controllers if you have <5 doors per site; consider a hub if you have 20+ doors or multiple locations.

Can I use a single-door controller for two doors?

No. Single-door controllers have one Wiegand reader input and one relay output. Wiring two readers and two locks to one controller causes contention and unpredictable lock behavior. Always match door count to controller capacity, or use a multi-door controller with expansion I/O from the start.

Do IP door controllers need a separate PoE switch?

Yes, unless your PoE switch already supplies enough power and ports. Calculate: each IP controller + reader = 5–15W. A 24-port PoE+ switch typically supplies 180–240W total; a fully loaded switch supports 12–20 door controllers. Use a managed PoE switch to monitor power per port and avoid brownout failures.

What happens to door access if the network goes down?

Controllers with onboard credential cache (10,000–100,000 card IDs) continue granting/denying access using last-synced rules. Once the network restores, audit logs upload and credential cache refreshes. Controllers without cache fail-lock (deny all) or fail-open (allow all), depending on configuration; clarify your site's safety vs. convenience tradeoff before deployment.

Which reader types does each controller support?

Most modern controllers (Kantech, Axis, Honeywell) accept Wiegand 26/34/37-bit readers and EM proximity (125 kHz). Premium models add RS-485 multi-reader support and IP readers. Legacy controllers may support only Wiegand; always cross-check reader datasheet against controller input specs before purchase.

How do I add more doors without replacing the controller?

Multi-door controllers with modular I/O expansion slots allow 2–4 additional door modules. Each module adds reader + lock outputs and sensor inputs. If you need to go beyond 8 doors at one site, upgrade to a multi-site control system with multiple controllers, or use a centralized access hub with redundant uplinks.

Related Categories

Adjacent equipment that typically ships alongside these products.

Door Hardware & I/O Door Locks & Strikes Control Systems Card Readers Access Hubs & Controllers Access Cards & Credentials Credentials

Engineering Reading

Deep-dives from our engineering team on deployment planning.

Why Surveillance Systems Fail During Incidents Why Your NVR Can't Handle Its Rated Camera Count Why Surveillance Networks Collapse at the Core Why Large Surveillance Systems Fail: Storage Throughput Reality Why Surveillance Standards Collapse After the Third Location Why 4K Cameras Fail at Night Why Your PoE Switch Fails After 18 Cameras Frame Rate vs. Reality: When 30 FPS Makes Your System Worse