Kantech · SH-CMG3/GG

Kantech ShadowProx KSF Dye Sublimation Card

Dye-sublimation KSF cards with fade-resistant color for ShadowProx access

• ShadowProx KSF dye-sublimation card
• Full-color photo-quality printing infused into card
• No lamination layer — reduced cost and thickness

Kantech · SK-CE-400-SCSG

Kantech SK-CE-400-SCSG Starter Kit with EntraPass

Enterprise access control kit with centralized multi-site management

• Access control starter kit with EntraPass software
• Multi-technology reader: DESFire + MIFARE + HID + NFC
• AES-128 + RS-485 for enterprise-grade key management

Kantech · SK-CE402

Kantech SK-CE402 Starter Kit with EntraPass Corporate

Enterprise access control starter kit for multi-site deployments

• Access control starter kit with EntraPass Corporate
• Centralized multi-site cardholder + facility management
• Proximity reader + TCP/IP + RS-485 + RS-232 support

Kantech · SK-SE-1M-SCM

Kantech SK-SE-1M EntraPass Special Edition Starter Kit

Complete access control starter kit with EntraPass software for small-to-mid facilities

• EntraPass Special Edition + multi-tech smart card reader
• Handles DESFire, MIFARE, HID, NFC 13.56MHz, and 125kHz prox
• AES-128 encrypted RS-485 link to controller

Kantech · SK-SE-1M-RDR

Kantech SK-SE-1M-RDR Starter Kit with EntraPass

Complete access control for 1 door with EntraPass software included

• EntraPass Special Edition with 1-month software license
• 10 lb compact starter kit for single-door deployments
• 12VDC integrated controller + reader hardware bundle

Kantech · SK-SE-2M-SCSG

Kantech SK-SE-2M-SCSG Starter Kit EntraPass Special Edition

Complete access control starter kit with EntraPass software and multi-credential support

• EntraPass Special Edition + KT-2 controller in one kit
• 12VDC starter bundle ready to deploy out of the box
• Multi-vendor sourcing eliminated — single SKU starts the system

Kantech · SK-SE-400-SCM

Kantech SK-SE-400-SCM EntraPass Special Edition Starter Kit

EntraPass Special Edition starter kit with 4-door controller, multi-tech readers

• EntraPass Special Edition starter kit — 4-door access control
• Supports MIFARE + HID + NFC + 125 kHz Prox in one platform
• Wiegand + RS-485 for legacy reader and modern OSDP integration

Kantech · SK-CE-2M-SCM

Kantech Starter Kit EntraPass Corporate Edition

Complete 4-door access control kit with EntraPass Corporate software

• EntraPass Corporate Edition with two networked controllers
• Multi-tech reader handles MIFARE, HID, NFC, and 125kHz prox
• RS-485 + Wiegand communication for mixed-vendor sites

Kantech · SK-CE-1M-RDR

Kantech Starter Kit with EntraPass Corporate Edition

Network access control starter kit with EntraPass Corporate Edition software

• 1-door KT-1 starter kit with P225XSF ioProx reader bundled
• EntraPass Corporate Edition v6.02+ software included
• 12VDC complete kit deploys access control in one afternoon

Kantech · SK-CE-1M-SCM

Kantech Starter Kit with EntraPass Corporate Edition

Enterprise access control with centralized multi-site management

• KT-1 single-door controller + EntraPass Corporate bundled
• TCP/IP networked controller deploys on existing LAN
• 12VDC complete starter kit for first access control site

Kantech · SK-SE403

Kantech Starter Kit with EntraPass Special Edition

Multi-door access control starter kit with EntraPass software included

• 4-door starter kit with EntraPass Special Edition
• KT-400 controller + proximity readers + networking gear
• TCP/IP + RS-485 + RS-232 + EntraPass for small sites

Kantech · TR1675

Kantech TR1675 KT-400 Step-Down Transformer 75VA

110-to-16.5 VAC hardwired transformer, 75 VA for access control

• 75VA step-down transformer for KT-400 controller installs
• UL-listed for code-compliant access control power
• Direct OEM fit preserves controller warranty

Kantech · KT-APA-10-PC

Kantech USB Software Tool with PAP and Radio

USB software tool for Kantech access control programming and radio setup

• PAP USB programming tool for installer workstations
• Direct controller programming — no middleware required
• 0.1 lb pocket tool for field commissioning

Kantech · USB-485

Kantech USB-485 USB to RS-485 Communication Interface

USB-to-RS-485 converter with IP66 rating for access control integration

• USB to RS-485 interface for PC programming of panels
• IP66 ingress rating allows outdoor cabinet placement
• 0.4 lb compact dongle fits installer's laptop bag

Kantech · VC-485

Kantech VC-485 RS-232 to RS-485 Communication Interface

RS-232 to RS-485 converter for multi-device access control networks

Lifesafety Power · AC-CABLE-4-FEET-BOXED-SET-OF-2

Lifesafety Power AC-Cable-4-Feet-Boxed-Set-Of-2 AC-Cable-4-Feet-B

• Four-foot length suits standard rack or wall-mount AC runs without excess slack.
• Two-unit boxed set supports redundancy planning or simultaneous multi-device deployment.
• Designed for Lifesafety Power supplies and control modules requiring AC mains connection.

Lifesafety Power · E4A-BACKPLATE-ONLY

Lifesafety Power E4A-BACKPLATE-ONLY Backplate for E4A enclosure

• Replacement backplate assembly restores E4A enclosure functionality without full unit swap.
• Designed for E4A series ensuring precise mechanical fit and correct electrical alignment.
• Supports access control, alarm, and backup battery staging deployments at 230 VAC installations.

Lifesafety Power · E4M-BACKPLATE-ONLY

Lifesafety Power E4M-Backplate-Only E4M Back Plate Only

• Aluminum construction provides durable mounting for Mercury panels and FlexPower modules.
• Supports single and dual voltage configurations, enabling flexible power system design.
• Removable design simplifies replacement or expansion without specialized tooling.

Lifesafety Power · E8V-BOXED

Lifesafety Power E8V-BOXED Enclosure. E8 36" X 30" X6-1/2" Blk

• 36"×30"×6.5" profile fits standard 16" and 24" stud-center wall cavities.
• Vertx back plate supports 35mm DIN rail, M5/M6 fasteners for organized terminations.
• Top and side knockouts accept conduit entries up to 1.5" NPT for clean cable routing.

Lifesafety Power · F8P-BOXED

Lifesafety Power F8P-BOXED Voltage-Based Lock Power Module

• Isolates lock power from controller circuits, preventing maglock dropout under load.
• Operates on 230 VAC; integrates into standard electrical enclosures via wall or DIN-rail.
• Supports multiple maglocks and electronic strikes from one regulated source per enclosure.

Lifesafety Power · FPO250/250-2D82F8E2

Lifesafety Power FPO250/250-2D82F8E2 Sixteen Door Access Control

• Dual 12V/24V rails at 250W each power mixed-voltage door hardware from one enclosure.
• Supports up to 16 doors including EM locks, readers, RTE sensors, and strike plates.
• Independent rail design isolates faults — an overloaded 24V channel won't drop 12V egress locks.

Lifesafety Power · FPO75-C4E1

Lifesafety Power FPO75-C4E1 4 Door Access Control 4 Lock Outputs

• Four individually fused 3A outputs isolate door circuits, preventing one fault from affecting others.
• 75W budget supports four EM locks or solenoid strikes at 12V or 24V without auxiliary boost.
• DIN-rail E1 enclosure mounts directly in access control cabinets, eliminating extra surface hardware.

Lifesafety Power · FPO75/150-C4D8E1

Lifesafety Power FPO75/150-C4D8E1 Four Door Access Control 1224V

• Dual 12V and 24V rails power mixed-voltage locks and readers from one chassis.
• 75W budget supports four doors; single DIN-rail or wall-mount chassis cuts cabinet clutter.
• Continuous-duty passive cooling suits 24/7 access control without active fan maintenance.

Lifesafety Power · R8-BOXED

Lifesafety Power R8-BOXED Lock output module 8 outputs

• Eight individually fused 12VDC/3A outputs isolate faults so one shorted lock can't take down adjacent doors.
• Per-output failsafe/fail-secure jumper selection lets you match egress or security requirements door by door.
• FAI supervision detects open circuits, shorts, and supply faults and propagates alerts to the host panel instantly.

Lifesafety Power · RC150-C16

Lifesafety Power RC150-C16 rack mount DC lock control 12V@12A Or2

• 16 independently supervised outputs isolate faults without disrupting other lock circuits.
• Dual-voltage operation: 12VDC @ 12A or 24VDC @ 6A suits mixed door hardware installs.
• 19-inch rack-mount form factor centralizes lock power across multi-door enterprise deployments.

Lifesafety Power · RGM-D8PZ1

Lifesafety Power Rgm-D8PZ1 Empty R2U Rackdrawer

• Mounts up to four Lenel access control panels on a removable backplate in 2U space.
• 19" EIA-compliant form factor (19W × 3.5H × 20.5D in.) fits standard rack rails.
• Integrated lockset and wire management arm reduce tampering risk and cable strain.

Lifesafety Power · RGM-X-BOXED

Lifesafety Power RGM-X-BOXED Gemini Rack Drawer RGM-X 2U black

• Mounts in standard 19-inch racks, occupying only 2U of vertical space.
• Pull-out drawer design provides direct access to internal components during maintenance.
• Engineered for Lifesafety Power Gemini system frames; verify chassis compatibility before ordering.

Napco · GEM-EZM8

Napco GEM-EZM8 Access Control Module

Distributed access processor for multi-door commercial systems with card and PIN

• GEM-EZM8 access control module for credential validation
• Card and PIN with Wiegand/Serial reader support
• Local door strike decisions in milliseconds

Napco · GEM-K1CA

Napco GEM-K1CA Keypad Reader with Dual-Line Display

Menu-driven keypad reader with dual-line display for PIN-based access control

• GEM-K1CA keypad reader with 32-char backlit display
• Dual-line display for prompt + status messaging
• Direct-fit for Napco access control panels

Napco · GEM-K1VPS

Napco GEM-K1VPS Backlit Alphanumeric Keypad Reader

Backlit alphanumeric LCD keypad for Napco GEM access control

• GEM-K1VPS keypad reader with backlit alphanumeric LCD
• Auto-sensing dim mode for variable lighting
• Custom prompts reduce user confusion and support calls

Napco · GEM-K4RF

Napco GEM-K4RF Keypad Reader

Large-display PIN keypad reader for Napco control panel integration

• GEM-K4RF keypad reader with large backlit English display
• PIN entry for parking and exterior entry points
• Clear visibility in low-light environments

Napco · GEM-P3200

Napco GEM-P3200 Keypad Reader

PIN keypad reader for Napco systems—no cards or biometrics needed

• GEM-P3200 keypad reader with PIN-only credential entry
• Numeric/alphanumeric code entry at door
• Centralized Napco panel code management

Napco · GEM-P801

Napco GEM-P801 Keypad Reader

PIN keypad reader for Napco GEM access control systems

• GEM-P801 RP8 numeric keypad reader for door entry
• PIN credential entry with Napco GEM compatibility
• Multi-reader door access integration

Napco · GEM-P816

Napco GEM-P816 Keypad Reader

PIN keypad reader for Napco access control systems

• GEM-P816 keypad reader with PIN entry capability
• Numeric/employee ID credential sequences
• Door-level access control for Napco systems

Napco · GEM-P9600

Napco GEM-P9600 PIN Keypad Reader for Access Control

Numeric PIN keypad reader for Napco GEM access control systems

• GEM-P9600 PIN keypad reader with RS-232 serial
• Deterministic wired comms for access control
• Eliminates lost-card credential replacement overhead

Napco · GEM-PIR

Napco GEM-PIR Motion Sensor Detector

Wireless PIR motion sensor for Napco systems with battery-saver mode

• GEM-PIR PIR motion sensor with auto temp compensation
• Battery-saver feature for extended deployment
• Direct-fit Napco panel integration with screws included