Camden · CM-RX-91

Camden CM-RX-91 Basic Single Relay Receiver

• 915 MHz Lazerpoint™ signal penetrates concrete and steel-frame walls reliably.
• Single 30VDC relay output drives electric strikes or solenoids with no added controller.
• Supports up to 40 access codes via 2-pin header connector for fast cabinet integration.

Camden · CM-SK336/42S

Camden CM-SK336/42S Electric Strike

• Fail-secure operation keeps the door locked on power loss, reducing breach risk.
• Integrates with standard access control panels and credential readers via conventional wiring.
• Backed by manufacturer warranty, supporting commercial and institutional deployment accountability.

Camden · CM-SK336/42SN

Camden CM-SK336/42SN TCP/IP Keypad Lock

TCP/IP keypad lock with HID credential support and remote monitoring

• HID proximity and smart card recognition integrated with numeric keypad
• Network-based management with centralized audit trails and remote control
• Lock/strike mechanism for door control in IP-connected access systems

Camden · CM-SK336/42SW

Camden CM-SK336/42SW Network Keypad

• TCP/IP communication enables centralized credential management without dedicated control wiring.
• HID credential support allows drop-in integration with existing HID access control infrastructure.
• Integrated keypad enables PIN or multi-factor validation at each networked door point.

Camden · CM-SRFM2

Camden CM-SRFM2 Exit Buttons

• TCP/IP connectivity enables real-time egress event logging over standard Ethernet.
• 2-channel wireless receiver eliminates conduit runs on retrofit and multi-zone installs.
• Direct 30VDC mag-lock output with HID reader support fits existing access deployments.

Camden · CM-SRX2

Camden CM-SRX2 2-Channel 868 MHz Wireless Relay Receiver

2-channel 868 MHz wireless relay receiver for HID access control

• Dual relay outputs control electromagnetic strikes and maglocks at 30VDC
• TCP/IP communication integrates with HID credential systems
• Indoor/outdoor rated receiver pairs with included transmitter

Camden · CM-TX-9

Camden CM-TX-9 Wall Switch Transmitter Keypad

Wall-mounted keypad transmitter with TCP/IP, RS-485, RS-232 support

• Multi-protocol connectivity integrates into IP-based or legacy hardwired systems
• Keypad-based credential input for wall-mounted access control applications
• Compatible with diverse network topologies for retrofit and new installations

Camden · CM-TXLF-1

Camden CM-TXLF-1 One-Button Key FOB Credential

Single-button key FOB for Camden access control systems

• One dedicated button eliminates multi-step sequences at entry doors
• Compact key FOB form factor fits standard key rings for daily carry
• Integrates with Camden reader infrastructure and credential protocols

Camden · CM-TXLF-1LP

Camden CM-TXLF-1LP One Button Recessed Key FOB

• 902–928 MHz ISM band with 20-bit coding yields 1M unique codes, minimizing credential overlap.
• Recessed button prevents accidental transmissions during carry, reducing false-trigger service calls.
• Pre-installed CR2032 with LED gas gauge alerts users before battery failure, cutting support calls.

Camden · CM-TXLF-2

Camden CM-TXLF-2 Two-Button Key FOB Credential

Two-button key FOB for Camden access control systems with dual functions

• Dual independent control buttons enable separate access commands for multi-door setups
• 125 kHz and higher frequency compatibility works with Camden reader infrastructure
• Secure encrypted access protects credential transmission across access control network

Camden · CM-TXLF-2LP

Camden CM-TXLF-2LP Two-Button Recessed Key FOB

• Operates on 902–928 MHz ISM band with 1 million unique 20-bit codes—no license required.
• Recessed buttons prevent accidental pocket activation, reducing false-trigger service calls.
• Battery Gas Gauge™ LED indicates CR-2032 charge level on demand—no meter needed.

Camden · CM-TXLF-4

Camden CM-TXLF-4 Four-Button Key FOB Credential

Four-button wireless FOB credential for multi-zone access control

• Four independent programmable buttons control separate doors or zones
• Wireless operation eliminates reader wiring in retrofit and new builds
• Compact handheld design—one operator manages multiple access points

Camden · CM-PT250M

Camden Concealed 1/4” inside diameter mortise mount - CM-PT250M

• Routes 4-conductor 22 AWG or 2-conductor 18 AWG wire through door frame mortises.
• 7" length spans standard commercial frame depths for retrofit and new construction.
• Concealed routing eliminates visible cable runs on door faces for clean installs.

Camden · CM-PT516M

Camden Concealed 5/16” inside diameter mortise mount - CM-PT516M

• 5/16" ID routes HID power and signal bundles together without compression or pinch risk.
• Concealed mortise routing eliminates surface conduit, preserving finished door frame aesthetics.
• 10-5/32" usable wire run covers most frame-to-panel distances without extension splices.

Camden · CV-550SPK

Camden CV-550SPK Standalone Proximity Reader & Keypad

Standalone proximity + keypad reader; 20,000 credentials, one relay output

• HID 125kHz proximity cards with integrated PIN keypad in one mounted device
• Stores 20,000 user credentials locally; no centralized panel required for single door
• OSDP and Wiegand support; 16VDC operation with one dry-contact relay for strike control

Camden · CV-603VR10

Camden CV-603VR10 Virtual Remote Licence Key

Multi-door controller for up to 20 doors with MIFARE, HID, and proximity credentials

• Supports MIFARE, HID, and 125kHz proximity credentials across 20 doors
• Wiegand and RS-485 communication protocols for flexible network integration
• Works with proximity and fingerprint readers on 12VDC power supply

Camden · CV-603VR50

Camden CV-603VR50 Virtual Remote Licence Key Controller

• Controls up to 20 doors from a single controller instance for mid-scale deployments.
• Authenticates MIFARE, HID, and 125kHz proximity credentials in mixed-reader environments.
• Wiegand and RS-485 interfaces support both local readers and long-distance serial runs.

Camden · CV-7400

Camden CV-7400 Dual HID Format Reader

• Reads dual HID credential formats from one head, eliminating extra reader hardware.
• Native Wiegand output integrates directly with major access control panels, no translator needed.
• 5VDC operation draws from standard reader supplies, simplifying retrofit wiring.

Camden · CV-7600

Camden CV-7600 MIFARE Reader with BLE Smartphone Credentials

• Reads DESFire, MIFARE, HID, and NFC/13.56 MHz cards for phased credential migration.
• BLE smartphone credential support reduces physical card issuance and replacement overhead.
• Dual OSDP and Wiegand output ensures compatibility with modern and legacy access controllers.

Camden · CV-7820

Camden CV-7820 Proximity Reader Single Gang

Single gang 125kHz proximity reader with 8-inch read range

• 8-inch read range fits standard door access control installations
• OSDP and Wiegand protocols integrate with existing access systems
• 16VDC operation in single gang form factor for retrofit deployments

Camden · CV-CSE-B

Camden CV-CSE-B 125kHz Proximity Card Reader (100-Pack)

• Dual OSDP/Wiegand output integrates with legacy and modern access control panels.
• Supports up to 250,000 users and 4 doors, scaling to enterprise facility deployments.
• 100-unit bulk pack at 16VDC simplifies large rollouts using standard commercial power supplies.

Camden · CV-ISH-B

Camden CV-ISH-B HID Format ISO Proximity Card Reader

• Supports up to 250,000 credentials, scaling across multi-facility enterprise deployments.
• OSDP and Wiegand outputs integrate with both legacy panels and modern networked controllers.
• Single reader manages up to 4 door strike circuits, reducing interface hardware requirements.

Camden · CV-KTA

Camden CV-KTA 125kHz Proximity Key Tag (25-Pack)

• AWID-format encoding ensures compatibility with HID and HID-compatible 125kHz readers.
• Passive operation eliminates batteries, reducing credential lifecycle overhead at scale.
• 25-pack bulk quantity covers a typical departmental rollout in a single procurement order.

Camden · CV-KTE

Camden CV-KTE 125kHz Proximity Tag (25-Pack)

• 125kHz HID-standard format works with installed North American reader bases—no firmware changes.
• Dual Wiegand and OSDP support lets one credential stock serve legacy and modern panels alike.
• Passive, read-only tags need zero battery maintenance and resist UID reprogramming attacks.

Camden · CV-KTH

Camden CV-KTH HID Proximity Reader Tag (25-Pack)

• 125kHz HID-format credential works with legacy and current proximity readers, no replacement needed.
• Dual OSDP and Wiegand support lets these tags integrate into mixed-protocol access control panels.
• 25-unit bulk pack at 16VDC simplifies mid-scale deployments across 10–15 doors on existing wiring.

Camden · CV-WRX4

Camden CV-WRX4 Four Channel Wiegand Receiver

• Supports four independent Wiegand channels, eliminating extra multiplexing hardware.
• DIP-switch selectable Wiegand 26 or 37 per channel enables mixed-protocol deployments.
• 9–21VDC input at 14mA idle fits battery-backed and PoE-adjacent power budgets.

Camden · CV-WTX2

Camden CV-WTX2 Two-Button Proximity Key Fob Reader

• Dual OSDP and Wiegand output eliminates protocol translators on mixed-controller deployments.
• HID 125kHz prox support preserves existing card and fob credential bases during retrofits.
• 16VDC operation and wall/rack mounting options fit standard reader runs without recabling.

Camden · CV-WTX2-H26

Camden CV-WTX2-H26 Two-Channel Wiegand Proximity Reader

• Dual Wiegand and OSDP outputs let one device serve both legacy and modern controllers.
• Reads HID 125kHz and AWID 34-bit credentials, preserving existing card and key tag stock.
• Two-channel architecture cuts panel port usage and simplifies wiring in multi-door clusters.

Camden · CV-WTX2H

Camden CV-WTX2H Two Channel Wiegand Proximity Reader

Dual-channel 125kHz proximity reader with Wiegand and OSDP output

• Two independent reader channels for multi-door access control setups
• Reads HID 125kHz proximity cards and fobs on 16VDC power
• Wiegand and OSDP protocol support for retrofit and new installations

Camden · CV-WTX2H-H26

Camden CV-WTX2H-H26 Dual-Channel Wiegand Proximity Reader

• Dual Wiegand/OSDP outputs let one reader serve legacy and modern panels simultaneously.
• IP67-rated housing and −35°C to +66°C range support outdoor and harsh-environment installs.
• Reads HID 37-bit and AWID 34-bit 125kHz credentials, preserving existing card ecosystems.

Camden · CV-WTX4H

Camden CV-WTX4H Four Channel Wiegand Key Fob Reader

Four-channel 125kHz proximity reader with Wiegand and OSDP output

• Four independent channels handle multiple credential streams or door zones
• HID 125kHz proximity credentials with Wiegand + OSDP protocol support
• Panel or surface mount at 16VDC for retrofit and new installations

Camden · CV-WTX4H-H26

Camden CV-WTX4H-H26 Four Channel Wiegand Proximity Reader

Four-channel proximity reader for multi-door access control systems

• Four independent channels support simultaneous multi-door deployment
• OSDP and Wiegand protocols integrate with existing access control systems
• Reads HID 125kHz proximity credentials at 16VDC operation

Camden · CV-WTX4H-H26SE

Camden CV-WTX4H-H26SE Four-Channel Wiegand Proximity Reader

Four-channel proximity reader for Wiegand and OSDP access control

• Reads 125kHz HID proximity cards and HID iCLASS SE smart cards
• Dual protocol output via Wiegand and OSDP for system integration
• Operates at 16VDC for standard power infrastructure compatibility

Camden · CX-1000/74

Camden CX-1000/74 Electric Strike Lock

Network electric strike, 24VDC fail-secure, TCP/IP control

• TCP/IP integration for centralized access control across multiple doors
• Fail-secure locking mode holds strike in locked position during power loss
• 24VDC operation with wall, ceiling, or pole mount for flexible installation

Camden · CX-1000/77

Camden CX-1000/77 Electric Strike

• Fail-secure 24VDC design keeps door locked on power loss or panel fault.
• SPDT relay input requires no firmware, VMS, or network integration to deploy.

Camden · CX-1085M

Camden CX-1085M Pneumatic Timer for Push Buttons

Pneumatic timer for push-button door control with TCP/IP integration

• Time-delay control for electromagnetic locks and strike mechanisms
• TCP/IP networked integration with access control systems
• Works in new installations and retrofit applications, –4°F to 120°F