STI

STI

SKU: KIT-102722-G

STI KIT-102722-G 5/8" Spacer for Stopper® Stations

• Provides 5/8" standoff to ensure correct gasket seating on uneven wall surfaces.
• Supports both indoor and outdoor Stopper/Stopper II station surface installations.
• Positions frame before gasket and cable entry hardware for clean, secure cable routing.

STI

SKU: KIT-102722-E

STI KIT-102722-E 5/8" Spacer for Stopper® Stations

• Maintains precise frame-to-strike air gap for reliable engagement in 9VDC Stopper® systems.
• Compatible with Stopper® Station and Stopper II assemblies for new installs and retrofits.
• Blank-off inserts seal unused cable entries, preventing moisture ingress in wet environments.

STI

SKU: KIT-102722-B

STI KIT-102722-B 5/8" Spacer for Stopper® Stations

5/8" spacer for STI Stopper® stations with 9VDC lock/strike

• Precise 5/8" spacing for proper alignment in Stopper® installations
• Compatible with 9VDC lock/strike mechanisms on Stopper® stations
• Wall-mount accessory for credential reader and door strike assembly

STI

SKU: KIT-102720-Y

STI Stackable Yellow 10mm Spacer Stopper® Station Push Button series

Yellow 10mm stackable push button with RS-232 control for door entry

• Modular stackable design builds multi-button arrays without extra hardware
• 9VDC wired operation with RS-232 serial for legacy system integration
• Wall-mount yellow spacer stopper element for visual identification in arrays

STI

SKU: KIT-102720-G

STI Stackable Green 10mm Spacer Stopper® Station Push Button series

Stackable 10mm green push button with 9VDC TCP/IP networked strike

• TCP/IP network connectivity integrates with centralized access control systems
• 9VDC operation compatible with STI stackable push button station frameworks
• Modular design stacks for multi-button configurations in door access panels

STI

SKU: KIT-06297E

STI Kit Package - "E" Spacer for STI-1210E and STI-1221E

Spacer kit for STI-1210E and STI-1221E door frame alignment with HID readers

• Ensures proper strike engagement on STI-1210E and STI-1221E 9VDC locks
• Corrects door frame fit across varied installation depths and configurations
• Supports HID credential reader integration in access control systems

STI

SKU: KIT-06297D

STI KIT-06297D Electric Strike Spacer Kit for STI-1210D/1221D

• Corrects frame-depth misalignment for STI-1210D and STI-1221D electric strikes.
• Operates at 9V DC, integrating directly with the strike's existing power circuit.
• Frame-specific design prevents latch engagement gaps on wood, metal, or composite frames.

STI

SKU: KIT-06297C

STI Kit Package - "C" Spacer for STI-1210C and STI-1221C

Alignment spacer for STI-1210C and STI-1221C electric strikes

• Corrects frame-to-strike spacing on STI-1210C and STI-1221C to prevent latch binding.
• Supports 9VDC electric strike installations in retrofit and new-build commercial door frames.
• Includes wall fixings and cable entry inserts; mounts using standard 7mm masonry drill pattern.

STI

SKU: KIT-06297B

STI Kit Package - "B" Spacer for STI-1210B and - KIT-06297B

• Corrects frame-to-strike gaps on STI-1210B and STI-1221B retrofit installations.
• Ensures reliable HID credential reader alignment when non-standard frame geometry is present.
• Requires 9VDC at strike and 7mm fixing holes; wall fixings included for direct frame mounting.

STI

SKU: KIT-06297A

STI Kit Package - "A" Spacer for STI-1210 and STI-1221A

Spacer kit for STI-1210 and STI-1221A electric strikes at 9VDC

• Aligns strikes on STI-1210 and STI-1221A models with 9VDC operation
• Accommodates variable door frame depths in HID credential access systems
• Wall-mount spacer assembly for proper strike positioning during installation

STI

SKU: GLR401NT-EN

STI GLR401NT-EN Global ReSet Push Button Credential

• UL-listed under UL2017 Type SM, UL294, and UL365 for compliant access control deployments.
• Operates at 42VDC, fitting standard low-voltage access control power infrastructures.
• Flush-mount double gang box installation with included #6-32 x 1.0" machine screws simplifies rough-in.

STI

SKU: G3A529ZA-EN

STI G3 Multipurpose Push Button with Shield, No Camera, Turn-to-Reset

Shielded push button for 12VDC lock/strike control with turn-to-reset

• 12VDC operation integrates with standard electromagnetic lock and strike systems
• Turn-to-reset manual override function for secured entry point access control
• Shielded enclosure design protects button mechanism in high-traffic installations

STI

SKU: G3A429EM-EN

STI G3 Multipurpose Push Button with Shield No - G3A429EM-EN

• Operates at 12VDC, compatible with standard access control auxiliary inputs.
• NC/NO/COM contact options support retrofit and new construction panel integration.
• Turn-to-reset mechanism enables manual override without requiring a system reset.

STI

SKU: G3A229PO-EN

STI G3 Multipurpose Push Button with Shield No - G3A229PO-EN

• Latching 12VDC push button holds state until deliberately reset via rotating disc.
• COM, NO, and NC terminals support flexible switching logic for diverse panel wiring.
• Shield enclosure reduces accidental activation and vandalism in commercial installs.

STI

SKU: G3A125XT-EN

STI G3 Multipurpose Push Button with Shield No - G3A125XT-EN

• Operates on 12VDC momentary input, compatible with standard electric strike circuits.
• NC/NO/COM contact outputs support both normally-open and normally-closed locking logic.
• Shielded stainless steel enclosure protects contacts; 1/2" NPT entry fits standard conduit.

STI

SKU: G3A125RM-EN

STI G3 Multipurpose Push Button with Shield, No Camera, Momentary

Networked momentary push button with shield for access control

• TCP/IP connectivity and 12VDC operation for door strike integration
• Momentary switch output with reset lever for tactile feedback
• Shielded design suitable for request-to-exit and access control apps

STI

SKU: G3A105XT-EN

STI G3 Multipurpose Push Button No Camera - G3A105XT-EN

• Outputs both NO and NC relay contacts for flexible wiring to G3 or third-party controllers.
• 12VDC operation integrates directly into existing STI G3 access control installations.
• Green illuminated momentary button signals ready-state and confirms request acceptance visually.

STI

SKU: EP242410-T3

STI EnviroArmour® Polycarbonate with NEMA 3R - EP242410-T3

• Injection-molded polycarbonate body meets NEMA 3R rating for outdoor and wet-location use.
• Integrated filter fan at 44dB(A) manages cabinet heat without separate HVAC equipment.
• Supports 7-door access control systems with UL/cUL-listed compliance for commercial installs.

STI

SKU: EP242410-T2

STI EnviroArmour® Polycarbonate with A/C and Heat - Tinted

NEMA 4 polycarbonate enclosure with A/C and heat for outdoor access control

• Integrated climate control maintains reader performance across temperature extremes
• Supports HID and NFC/13.56MHz credentials with TCP/IP network connectivity
• Polycarbonate construction with UV resistance and tinted lens for harsh environments

STI

SKU: EP242410-T

STI EP242410-T EnviroArmour Polycarbonate Enclosure

Polycarbonate enclosure for 7-door access control with TCP/IP

• Injection-molded polycarbonate resists impact and weather for indoor/outdoor
• Supports up to 7 controlled entry points in a single enclosure
• UL/cUL certified with TCP/IP network connectivity for remote integration