DMP · 1142-GUARD

DMP 1142-GUARD Under-Desk Hold-Up Transmitter Guard

Concealed under-desk mount for DMP wireless panic-holdup transmitters

• Purpose-built guard ensures mechanical fit with DMP wireless panic-holdup transmitters.
• Under-desk concealed mount prevents tampering and accidental activation in high-traffic areas.
• Ergonomic guard design allows authorized staff rapid two-button activation during incidents.

DMP · 1148-G

DMP 1148-G Personal Pendant Wireless Panic Button

Wireless pendant for panic and holdup alerts in commercial facilities

• Wearable panic button transmits wireless emergency alerts without reaching a hardwired device.
• Status LED confirms signal transmission to the receiver, enabling rapid deployment verification.
• Pre-installed non-removable battery eliminates ongoing maintenance; water-resistant for typical indoor use.

DMP · 1154

DMP 1154 Wireless Four-Zone Input Module

Four wireless zones for door/window monitoring with HID and NFC support

• Four independent wireless zones accept legacy door/window contacts with no new conduit runs.
• Supports HID and NFC/13.56MHz credentials, reducing reader hardware across distributed sites.
• 12VDC operation allows CR123A battery or PS12-5 supply for flexible permanent or temp installs.

DMP · 1158

DMP 1158 Wireless 8-Zone Input Module

Wireless 8-zone input module for retrofit door/window monitoring without cables

• Eight independent 12VDC zone inputs cover doors and windows without new cable runs.
• Wireless connectivity eliminates conduit work in retrofits, leased spaces, and warehouses.
• Integrates with DMP control panel ecosystems to expand zone capacity without panel replacement.

DMP · GP-23

DMP GP-23 Hidden Wire Surface Mount Magnetic Contact

Surface mount magnetic contact for DMP door and window monitoring

• Surface mount design eliminates frame drilling, simplifying retrofits and commercial installs.
• 1-inch rated gap tolerance gives installers reliable trigger thresholds on doors and windows.
• Concealed screws and multi-direction wire routing reduce visible footprint and deter tampering.

DMP · MET-44WG-18

DMP MET-44WG-18 Overhead Contact

TCP/IP overhead contact for networked door/window detection

• TCP/IP communication eliminates dedicated analog wiring runs to each sensor point.
• Overhead form factor enables ceiling or transom mounting without door-frame hardware.
• Integrates directly with DMP TCP/IP-zone-capable control panels and management systems.

DMP · P2S-001

DMP P2S-001 High Security Single Zone Magnetic Sensor

Single zone magnetic sensor for door/window monitoring with HID integration

• Single-zone magnetic detection simplifies per-door/window wiring in multi-zone panels.
• HID credential integration correlates door contact events with cardholder access logs.
• Intrusion/contacts cable category ensures signal compatibility with standard detection circuits.

DMP · SM-20WG

DMP SM-20WG 3" Wide Gap Magnetic Reed Contact

3" wide gap magnetic reed contact for networked door monitoring

• 3-inch operating gap handles reinforced steel frames and non-standard door geometries.
• TCP/IP connectivity enables remote event logging across distributed perimeter door networks.
• Supports up to 500 NFC/13.56MHz credentials for multi-zone access control deployments.

DMP · STB-10

DMP STB-10 3/8" Recessed Contact

3/8" recessed contact for concealed door and window monitoring

• 3/8" recessed body fits tight door and window frame cavities for flush, hidden install.
• Closed-loop wiring integrates directly with DMP panels and standard intrusion alarm systems.
• Miniature form factor eliminates surface-mount housing, keeping hardware invisible post-install.

DSC · PG9939

DSC PG9939 Wireless Temperature Sensor

Wireless temperature sensor for DSC systems, -20°C to 50°C range

• PG9939 wireless temperature sensor, -20C to 50C
• 128-bit AES encryption on CR2032 lithium battery
• Up to 5-year battery life for facility monitoring

Eaton · 103005822

Eaton Temperature & Humidity Sensor TH-Module - 103005822

Temperature and humidity sensor module designed for environmental monitoring in surveillance, access control, and data center environments

• Temperature and humidity sensor module for environmental monitoring
• Detects thermal runaway and condensation risk in equipment racks
• Integrates with Eaton UPS and PDU management systems

ELK Products · ELK-M1ZTSR

ELK Products M1 Zone Temp Sensor - ELK-M1ZTSR

Zone temperature sensor expansion module for ELK M1 control panels

• Zone temp sensor with remote probe for off-panel placement
• Probe extension lets you sense temperature away from panel housing
• Drops onto ELK M1 zone input for environmental automation

ELK Products · ELK-M1ZTS

ELK Products M1 Zone Temperature Sensor M1Zts - ELK-M1ZTS

Zone temperature sensor designed to integrate with ELK M1 control panels, enabling HVAC automation and environmental monitoring within a security

• Zone temperature sensor adds HVAC monitoring to ELK M1 panels
• Wired zone input integrates temperature data into security logic
• Trigger automation on temperature thresholds at any monitored zone

GRI · 2600

GRI 2600 Water Sensor with Relay

Passive water sensor with relay for 12V/24V alarm systems, no power needed

• Water sensor with built-in N.O. relay - no intermediate switching
• Conductive moisture probe distinguishes water from humidity
• 12V/24V alarm system compatible for direct panel zone wiring

GRI · 4561

GRI 4561 Tilt Sensor

Miniature tilt sensor detects 13.3mm displacement for tamper detection

• Compact 2.0 x 0.75 inch tilt sensor for covert equipment monitoring
• Detects panel, cabinet, or display rotation away from secured position
• 25A switching capacity, 5VA max for direct alarm zone wiring

GRI · 4561R

GRI 4561R Tilt Sensor with Relay

Tilt sensor with relay output for door and window monitoring

• Tilt sensor with integrated N.O./N.C. relay output to panel
• Switches clean contact closure - no software parsing needed
• 5VA max switching capacity for direct alarm zone integration

GRI · DPARM

GRI DPARM Closed Loop Pool Access Alarm

Closed-loop pool perimeter alarm with integrated access control

• Closed-loop pool access alarm with continuous circuit monitoring
• Detects tampering or line cuts immediately - no silent failures
• 9V battery operation - drop-in for residential pool perimeter

GRI · GR3045

GRI GR3045 Panic Switch

Hardwired panic switch with 80A relay capacity for emergency response

• Finger-tip panic switch handles up to 80A direct alarm relay loads
• Deliberate-actuation lever prevents accidental triggering
• Operates 32 to 140 degrees F for unconditioned panic-button placement

GRI · H8800

GRI H8800 Humidity Sensor

Precision RH sensor for HVAC, data centers, and facility monitoring

• Humidity sensor for HVAC, climate control, and facility monitoring
• 10VDC operation drops into standard sensor power buses
• Reliable output for commercial and industrial environment tracking

GRI · PAA

GRI PAA Pool Access Alarm

Standalone pool perimeter alarm with instant visual and audible alert

• Closed-loop pool access alarm tuned for pool perimeter coverage
• Ultralife 9V lithium battery for multi-year unattended operation
• Filters wind, animals, and vegetation movement false alarms

GRI · SG-2

GRI SG-2 ShockTec Vibration Sensor

Ground vibration sensor with 5–500 Hz detection for perimeter breach warning

• ShockTec vibration sensor detects climbing, cutting, and impact
• Standoff warning before intruder reaches the fence or barrier
• 12V DC or battery operation - relay contact closure to panel

GRI · T8800

GRI T8800 Temperature Sensor

Industrial temperature sensor for HVAC control and facility automation

• Industrial temperature sensor for factory floor and server rooms
• 10VDC operation drops into standard environmental monitoring loops
• US-made 1 lb housing for outdoor equipment enclosure deployments

GRI · WVS

GRI WVS Water Valve Shutoff

Automatic water shutoff controller stops floods at the source

• Automatic water valve shutoff triggers on flood or abnormal flow
• 55 mA draw at 12V DC - low alarm panel aux power impact
• Integrated battery backup keeps shutoff active during AC outage

Hanwha · TRTN-PR001

Hanwha TRTN-PR001 Multi-Detection Environmental Sensor

Multi-threat environmental sensor for vaping, THC, aggression detection

• Detects vaping, nicotine, THC, aggression, and emergency keywords in real time
• PoE+ powered, IP65 rated, IK10 vandal resistant for indoor/outdoor mounting
• AWS cloud alerts and Triton Dashboard integration for centralized monitoring

Hanwha · TRTN-UA001

Hanwha TRTN-UA001 Environmental Sensor

Multi-threat environmental sensor with substance & acoustic detection, PoE+

• Detects vaping, smoke, marijuana, gunshots, screams, and glass breakage in real time
• People counting and loitering analytics with IP66 rating and 10-year warranty

Honeywell · 4191SN-WH

Honeywell 4191SN-WH Recessed Door Contact Sensor

Recessed wired door contact for commercial perimeter security without batteries

• Hard-wired connection eliminates battery cycles and RF interference for 24/7 uptime.
• Recessed form factor mounts flush into door frames, reducing tamper and damage risk.
• Triggers zone detection automatically on door open, requiring no post-programming intervention.

Honeywell · 5819S

Honeywell 5819S Wireless Door/Window Contact

Wireless shock sensor and transmitter designed to integrate with Honeywell 5800 Series alarm systems

• Three independent zones (shock, reed switch, external contact) reduce panel input consumption.
• 6–8 ft omni-directional shock coverage detects forced entry without line-of-sight alignment.
• Loop 3 accepts hardwired contacts, bridging legacy glass-break sensors into the 5800 RF chain.

Honeywell · PROSIXTEMP

Honeywell ProSIX Wireless Temperature Sensor - PROSIXTEMP

Wireless temperature sensor designed to integrate with Honeywell ProSIX security systems

• Wireless integration eliminates sensor wiring runs to the ProSIX control panel.
• Monitors ambient temperature alongside intrusion events in a single ProSIX system.
• Suits data centers and climate-sensitive storage where temperature excursions need alerts.

Middle Atlantic · FWD-LT-UTL-35-40-D

Middle Atlantic FWD-LT-UTL-35-40-D 35-40U Dual

Forward-facing rack utility lighting fixture with an integrated dimming sensor, sized for 35–40U dual-rack configurations

Middle Atlantic · FWD-LT-UTL-41-42-D

Middle Atlantic FWD-LT-UTL-41-42-D 41-42U Dual

Forward-facing rack utility lighting kit with integrated dimming sensor, engineered specifically for 41U and 42U dual-rack enclosures

Middle Atlantic · FWD-LT-UTL-44-45-D

Middle Atlantic FWD-LT-UTL-44-45-D 44-45U Dual

Forward-facing utility light strip with integrated dimming sensor, sized to span a 44U rack enclosure

Optex · AP-360BR(C)

Optex AP-360BR(C) 360-Degree Ceiling-Mount PIR Detector

360° ceiling PIR detector, battery-powered, recessed mount

• 360-degree omnidirectional PIR motion coverage from one ceiling unit
• Battery-operated at 200 mA - no hardwired power pull to ceiling
• Compact 52 x 42.5 mm ceiling-mount housing for discreet install

Optex · AX-100TFRI

Optex AX-100TFRI Outdoor Photoelectric Beam Detector

Battery-powered outdoor beam detector, 200 ft range, IP65 rated

• 200ft (60m) active infrared beam detector for outdoor perimeters
• Battery-powered with 4 SAFT LSH20 lithium cells - no AC pull
• Operates -13 to 140 degrees F for year-round outdoor exposure

Optex · AX-130TN

Optex AX-130TN Outdoor Beam Detector 20m

4-beam outdoor detector with 20m range and IP65 rating

• Outdoor 4-beam photoelectric detector with 20m (70ft) range
• 4 independent channels for layered perimeter zone coverage
• 38 mA draw at standard alarm panel voltage - low aux power impact

Optex · AX-200TFRI

Optex AX-200TFRI Outdoor Photoelectric Beam Detector

Outdoor perimeter beam detector with 200ft range and IP65 rating

• 200ft active infrared beam detector with IP65 outdoor housing
• Operates -13 to 140 degrees F for year-round outdoor exposure
• Standalone perimeter zone protects fence lines and rooftop edges

Optex · AX-200TN

Optex AX-200TN Outdoor Photoelectric Beam Detector 20m (70ft.)

Outdoor thermal motion detector, 20m range, IP65 rated

• Outdoor PIR motion sensor with dual-element pyroelectric design
• Two-element filtering rejects sun and temperature swing false alarms
• Hardwired install for stable outdoor perimeter motion coverage