TP-Link · RE500X

TP-Link RE500X AX1500 Wi-Fi 6 Range Extender

Wall-plug dual-band Wi-Fi 6 (802.11ax) range extender engineered to bridge coverage gaps in warehouse automation, office perimeters, and enterprise

• AX1500 wall-plug Wi-Fi 6 dual-band range extender
• 1.46 Gbps throughput for warehouse and office coverage gaps
• Drop-in 802.11ax repeater — no wired backhaul needed

TP-Link · RE600X

TP-Link RE600X AX1800 Wi-Fi 6 Range Extender

Plug-in Wi-Fi 6 (802.11ax) range extender designed to expand network coverage in spaces where wired backhaul is impractical

• AX1800 wall-plug Wi-Fi 6 dual-band range extender
• Repeater mode bridges gaps in warehouse and multi-floor sites
• Dual-band 2.4 GHz and 5 GHz simultaneous operation

TP-Link · RE615X

TP-Link RE615X AX1800 Wi-Fi 6 Range Extender

Dual-band Wi-Fi 6 (802.11ax) range extender built to eliminate coverage dead zones in facilities where security cameras, IoT sensors, or mobile

• AX1800 dual-band Wi-Fi 6 range extender — bridge mode option
• Eliminates coverage dead zones for cameras and IoT devices
• WPA2 and WPA3 security for enterprise client encryption

Transition Networks · S6120-1040-NA

Transition Networks S6120-1040-NA 4x T1/E1 ION with Ethernet

4-port T1/E1 to 10G Ethernet converter for legacy telecom migration

• Converts 4 independent T1/E1 circuits to a single 10G Ethernet uplink with no transcoding.
• Full SNMP, CLI, and web management integrates directly into existing NOC monitoring platforms.
• Industrial-rated operating range and CE/EN55022 Class A certifications suit harsh equipment rooms.

Transition Networks · S6210-3040-NA

Transition Networks S6210-3040-NA DS3-T3/E3 Coax to Fiber

DS3-T3/E3 coax-to-fiber converter for industrial outdoor deployments

• Converts DS3/T3/E3 coax to 10G SFP fiber with no intermediate signal conditioning.
• Industrial-rated for outdoor cabinets and harsh sites; DIN-rail mount included.
• Managed architecture enables remote monitoring; backed by a lifetime warranty.

Transition Networks · SPOEB1013-105-FNA

Transition Networks SPOEB1013-105-FNA Optical Ethernet Extender

Fiber optic Ethernet extender for point-to-point industrial network extension

• Extends 10/100 Mbps Ethernet over multimode fiber, bypassing 100 m copper limits.
• IEEE PoE (15.4 W) powered — no separate DC supply needed at remote install points.
• DIN rail-ready with included 4-slot shelf for direct cabinet or enclosure mounting.

Transition Networks · SRS2F3111-100-NA

Transition Networks SRS2F3111-100-NA Managed Media Converter

8-port managed converter bridges copper to fiber with ST connectors

• 8-port managed design lets you consolidate copper-to-fiber conversion at a single point.
• Gigabit throughput sustains bandwidth-intensive surveillance and data traffic across fiber runs.
• ST fiber interface and 100BASE-FX support simplify integration into existing fiber infrastructure.

Transition Networks · SRS2F3114-100-NA

Transition Networks SRS2F3114-100-NA RS232/DB9 to Fiber Media

RS232 to single-mode fiber converter with 8 managed ports and gigabit speed

• Bridges RS-232/DB9 serial devices to single-mode fiber for extended-distance runs.
• 8 managed ports support gigabit throughput for high-density serial device integration.
• SC single-mode fiber connectivity suits campus and wide-area fiber infrastructure deployments.

Tripp Lite · B165-101

Tripp Lite B165-101

Tripp Lite · B203-104-PNP

Tripp Lite B203-104-PNP

Ubiquiti · UACC-LRE

Ubiquiti UACC-LRE Long-Range Ethernet Repeater

Ethernet repeater extends PoE networks 1 km with passthrough power

• Extends PoE network segments up to 1 km, eliminating mid-run active equipment.
• Delivers 22.5W passthrough PoE+ to power cameras or APs without a second injector.
• IPX5-rated enclosure handles outdoor installs from -40 to 80°C with ±30kV ESD protection.

Ubiquiti · UACC-RETROFIT-POE-2WIRE

Ubiquiti UACC-RETROFIT-POE-2WIRE PoE Extender

Extend PoE power across existing 2-wire infrastructure for access control

• Accepts PoE++ input and delivers PoE/PoE+ output across existing 2-wire runs.
• Works with legacy twisted-pair or coaxial cable, eliminating new Ethernet pulls.
• Dual-unit TX/RX design deploys at the PoE source and near the access device.

Veracity · VHW-HWPS-B4-LL

Veracity Highwire Powerstar BASE4 Linklock - VHW-HWPS-B4-LL

Gigabit-rated connector assembly designed for the Highwire Powerstar BASE4 platform

• Highwire Powerstar BASE4 Gigabit Linklock connector
• Drop-in module for BASE4 platform expansion
• Gigabit Ethernet over coax for legacy cable reuse

Veracity · VHW-HWPS-B8-LL

Veracity Highwire Powerstar BASE8 Linklock - VHW-HWPS-B8-LL

Linklock connector module designed for the Highwire Powerstar BASE8 platform

• Highwire Powerstar BASE8 Linklock connector module
• Gigabit Ethernet over coax for legacy cable reuse
• Drop-in module for BASE8 platform expansion

Veracity · RMPSU-8W

Veracity RMPSU-8W 24-Port Managed Gigabit Switch

24-port managed gigabit switch for rack and DIN rail security systems

• All 24 ports run full 1000 Mbps for simultaneous high-bandwidth IP camera feeds.
• VLAN, QoS, and port mirroring give integrators precise control over security traffic.
• DIN rail mounting fits electrical enclosures and compact security closets cleanly.

Veracity · VHW-1U

Veracity VHW-1U Ethernet over Coax Extender

Ethernet over coax extender—300m reach on existing RG-59/RG-6 cable

• Transmits 10/100 Mbps Ethernet up to 300m (1100ft) over existing RG-59/RG-6 coax.
• Zero-configuration transparent bridge—no IP assignment needed for immediate deployment.
• 1U rack-mount form factor fits cable headends and central hub closets with 3-year warranty.

Veracity · VHW-DMB

Veracity VHW-DMB Ethernet over Coax Converter

Ethernet over coax converter for IP cameras on existing cable runs

• Transmits standard Ethernet over existing RG-6/RG-11 coax, eliminating recabling costs.
• DIN rail mountable design fits panel and rack deployments in compact equipment spaces.
• Supports 802.3af PoE, powering IP cameras directly through the coaxial infrastructure.

Veracity · VHW-HW

Veracity VHW-HW Ethernet over Coax Extender

Ethernet over coax extender for retrofit installs—1000 ft range

• Delivers 100Base-TX over existing coax up to 1,100 ft, eliminating new cable pulls.
• Transparent Layer 2 bridge needs no IP config—plug coax and Ethernet in, traffic flows.
• PoE 802.3af pass-through powers edge devices over the same coax run via BNC connector.

Veracity · VHW-HWPS-B

Veracity VHW-HWPS-B HIGHWIRE Powerstar PoE Extender

PoE extender for cameras and readers up to 1,000 feet away

• Extends PoE+ (802.3at) and 100Base-TX up to 300m (1,000ft) over coax.
• Delivers up to 5W PoE budget to power cameras, readers, and intercoms remotely.
• Rated -10 to 50°C and supports RG-59/RG-11 coax for existing cable reuse.

Veracity · VHW-HWPS-B4

Veracity VHW-HWPS-B4 HIGHWIRE Powerstar Managed PoE Extender

Managed PoE extender with Gigabit speed for remote camera and sensor sites

• Extends PoE 802.3af and Gigabit data up to 300m (1,640ft) over RG-59/RG-11 coax.
• 200 Mbps bandwidth sustains concurrent HD and 4K streams without compression artifacts.
• Managed interface enables remote VLAN, QoS, and power-fault diagnosis without site visits.

Veracity · VHW-HWPS-B8

Veracity VHW-HWPS-B8 HIGHWIRE Managed PoE Extender

Managed PoE extender for security cameras beyond switch reach

• Extends PoE 802.3af delivery up to 1,640 ft (500 m) beyond standard switch reach.
• DIN-rail mount and screw terminals simplify installation in control panels and enclosures.
• SNMP management enables remote VLAN tagging, port shutdown, and fault isolation at 25 W PoE budget.

Veracity · VHW-HWPS-C

Veracity VHW-HWPS-C HIGHWIRE Powerstar PoE Extender

PoE extender pushes power 300m beyond standard limits on single cable

• Extends PoE+ power delivery up to 300 m (1,000 ft) on a single cable run.
• Accepts and re-injects 802.3at PoE+, eliminating separate power lines for edge devices.
• Rated –10°C to 50°C, suiting enclosed outdoor and temperature-controlled indoor installs.

Veracity · VHW-HWPS-C2

Veracity VHW-HWPS-C2 HIGHWIRE Powerstar PoE Extender

PoE extender reaches 1000ft to power remote security devices

• Extends PoE+ (802.3at) at up to 5W over coax to 1000ft for remote cameras.
• Runs 100Base-TX at 200 Mbps throughput over RG-59 or RG-11 coax cable.
• Operates from -10 to 50°C and weighs 90g for tight enclosure installs.

Veracity · VHW-HWPS-C4

Veracity VHW-HWPS-C4 Managed PoE Extender

Managed PoE extender regenerates power & signal to 300m for remote cameras

• Extends PoE+ signal and power up to 300m (1000ft) over RG-59/RG-11 coax.
• Managed Layer 2 with VLAN and port mirroring isolates cameras from office traffic.
• Operates from -10 to 50°C, fitting both indoor cabinets and temperature-controlled enclosures.

Veracity · VHW-HWPS-CBB

Veracity VHW-HWPS-CBB HIGHWIRE Powerstar PoE Extender

PoE extender with power regeneration up to 1000 ft on coax cable

• Extends PoE and 100Base-TX Ethernet up to 1000 ft over RG-59/RG-11 coax.
• Regenerates PoE+ (802.3at) power delivery, eliminating separate 24VDC home runs.
• Operates from -10°C to 50°C, supporting both indoor and protected outdoor installs.

Veracity · VHW-HWPS-CXT

Veracity VHW-HWPS-CXT PoE Over Coax Camera Adaptor

Paired Ethernet-over-coax adaptor that lets you run PoE power and 100Base-TX data over existing 75-ohm BNC coaxial cable runs

• PoE-over-coax camera adaptor for existing 75-ohm BNC runs
• Delivers PoE 802.3af power and 100Base-TX data over coax
• Retrofits IP cameras into legacy analog cable infrastructure

Veracity · VHW-HWPS-ERK4-US

Veracity VHW-HWPS-ERK4-US HIGHWIRE Powerstar Ethernet Extender

Ethernet extender pushes 10/100 Mbps to 300m without repeaters

• Extends 10/100 Mbps Ethernet up to 300m (1100 ft) over Cat5, RG-59, or RG-11.
• Eliminates repeaters and fiber conversion—direct point-to-point run from closet to edge.
• Industrial temperature rating supports outdoor shelters, parking structures, and utility buildings.

Veracity · VHW-RMPSU-US

Veracity VHW-RMPSU-US HIGHWIRE Ethernet over Coax

Ethernet over coax for surveillance—reuse existing cable runs

• Ethernet over Coax extender for legacy RG-59 cabling
• Industrial-grade operating temperature range
• Reuses existing coax for IP camera retrofits

Veracity · VLS-1N-L

Veracity VLS-1N-L LONGSPAN PoE Extender Media Converter

PoE extender with fiber conversion for long-distance remote cameras

• Extends PoE+ (802.3at) power and data beyond the 100 m Ethernet limit.
• Integrated media converter bridges fiber backbone to copper for remote drops.
• Rack-mountable; pairs with VPSU-xx multi-channel supplies for centralized power.

Veracity · VLS-1N-LC

Veracity VLS-1N-LC HIGHWIRE Longstar LITE Transceiver

Single-channel fiber optic transceiver engineered for extended-distance IP camera transmission over fiber optic cable in professional surveillance

• HIGHWIRE Longstar LITE single-channel fibre transceiver
• LC fiber connector for standard cable plant integration
• Point-to-point HIGHWIRE camera fiber transmission

Veracity · VLS-1P-B

Veracity VLS-1P-B PoE Extender

Single-port PoE extender pushes 802.3af/at to 600m range

• Extends 802.3af PoE and 100Base-TX data up to 600m over Cat5e/Cat6.
• 25W PoE budget supports IP cameras, readers, and sensors without AC drops.
• Compact 120×36×23mm form factor installs at rack or remote edge points.

Veracity · VLS-1P-BC

Veracity VLS-1P-BC 4-Port PoE Extender

4-port PoE extender for cameras and devices 150m+ from switch

• Extends PoE and data to 4 independent endpoints up to 600 m from the switch.
• 25 W PoE 802.3af budget supports cameras and access-control readers simultaneously.
• Industrial-rated design handles outdoor mounting and conduit runs on Cat5e/Cat6.

Veracity · VLS-1P-C

Veracity VLS-1P-C LONGSPAN PoE Extender

Single-port PoE extender for IP cameras & access readers 150–250m out

• Regenerates PoE+ (802.3at) power beyond 100 m, eliminating brownouts at 150–250 m endpoints.
• 10/100 Mbps, 200 Mbps bandwidth passes VLAN and QoS tags transparently—no protocol changes needed.
• Single-port, 5.4×2.4×1.1 in form factor rack-mounts and pairs with VPSU-xx redundant power supplies.

Veracity · VLS-1P-CC

Veracity VLS-1P-CC PoE Extender

Extends PoE power and data beyond 100m without extra power supplies

• Extends PoE 802.3af power and data up to 600m (690 ft) over Cat5e/Cat6.
• 25W PoE budget supports IP cameras, access control readers, and intercoms.
• 100Base-TX Fast Ethernet at 200 Mbps eliminates the need for added power drops.

Veracity · VLS-1U

Veracity VLS-1U LONGSPAN PoE Extender SFP Module Switch

24-port SFP switch extends PoE across fiber for remote cameras

• 24 hot-swappable SFP slots support single-mode fiber runs beyond 20 km.
• Regenerates 802.3at+ PoE at the fiber terminus, powering cameras and readers remotely.
• 1U rackmount chassis consolidates fiber termination, switching, and power injection.

Veracity · VLS-LS-B8

Veracity VLS-LS-B8 LONGSPAN PoE Extender 12-Port Industrial

12-port PoE extender with SFP fiber options for industrial long-distance

• 12-port 802.3af PoE switch extends power and data to distributed edge devices.
• SFP module design supports fiber uplinks for EMI immunity on long cable runs.
• Industrial operating temperature rating sustains performance in harsh outdoor sites.