Geovision

SKU: 140-POE0812-000

Geovision 140-POE0812-000 8-Port PoE+ Network Switch

• Delivers 802.3at PoE+ across 8 RJ-45 ports with a 119W total power budget.
• Each port supports 10/100/1000BaseT, keeping legacy and gigabit cameras on one switch.
• Two open SFP slots accept optional fiber transceivers for long-run or isolated uplinks.

Geovision

SKU: 55-PA191-100

Geovision 55-PA191-100 PoE Adapter 802.3af PSE

• IEEE 802.3af compliant PSE delivers up to 15.4 W for PoE-powered endpoints.
• Mid-span injector adds PoE to existing Ethernet runs without replacing switches.
• Supports low-power cameras and access-control devices on standard POSINT cabling.

Geovision

SKU: 84-APA903B-001U

Geovision 84-APA903B-001U Gigabit PoE Injector

• Delivers IEEE 802.3af PoE at 48V to power cameras and door controllers.
• Gigabit throughput sustains 1000 Mbps full-duplex for video and analytics.
• Single-port passive design minimizes failure modes and draws only 4W itself.

Geovision

SKU: 84-APOE081-301U

Geovision 84-APOE081-301U 8-Port PoE+ Network Switch

• Delivers up to 30W per port via IEEE 802.3at PoE+ across all 8 Gigabit ports.
• Two dedicated Gigabit uplink ports support daisy-chaining to a core switch or NVR.
• Compatible with any IEEE 802.3af/at device, including Axis, Hikvision, and Dahua cameras.

Geovision

SKU: 84-APOE161-401U

Geovision 84-APOE161-401U 16-Port Managed Switch

• 16 x 10/100/1000 Mbps ports sustain simultaneous multi-camera streams without bottleneck.
• Extended-range PoE eliminates outdoor power runs to remote cameras beyond 100m cable limits.
• Web-based management enables VLAN, port prioritization, and link monitoring from any browser.

Geovision

SKU: 84-APOE162-001U

Geovision 84-APOE162-001U GV-APOE1612 Network Switch

• 16-port PoE+ (802.3at) switch delivers up to 30W per port across all 16 ports.
• 250W total PoE budget supports simultaneous powering of cameras, APs, and readers.
• Four SFP uplink ports plus combo ports enable fiber or copper backbone flexibility.

Geovision

SKU: 84-APOE48W-301U

Geovision 84-APOE48W-301U 48-Port PoE+ Switch

• Powers all 48 ports at 802.3at PoE+ simultaneously with full 1 Gbps per port.
• Six 10GE SFP+ uplinks eliminate backbone bottlenecks in large camera deployments.
• Web-managed with no driver install — deploy directly into existing rack infrastructure.

Geovision

SKU: 84-GVCOM-2000

Geovision 84-GVCOM-2000 Media Converter

• Converts between network media types, eliminating rewiring in mixed-cabling deployments.
• 12 Mbps data rate sustains reliable surveillance traffic across bridged network segments.
• Compact form factor fits tight rack, cabinet, or wall-mount spaces in retrofit installs.

Geovision

SKU: 84-POE0100-0010

Geovision 84-POE0100-0010 1-Port PoE Extender

• Extends IEEE 802.3af PoE runs an additional 100m beyond the standard 100m limit.
• Single RJ45 in / RJ45 out topology installs inline with no configuration required.
• Delivers up to 13W to the end device using standard 802.3af switch infrastructure.

Geovision

SKU: 84-POE1601-001U

Geovision 84-POE1601-001U GV-POE1601 16-Port PoE+ Switch

• 16 PoE+ ports (802.3at) deliver up to 30W each for cameras, readers, and intercoms.
• 250W total power budget supports mid-to-large camera deployments without separate injectors.
• Dual gigabit uplinks (RJ-45 copper or SFP) connect to core switches or NVRs flexibly.

Geovision

SKU: 84-SD2200S-2012

Geovision 84-SD2200S-2012 Network Switch

• Outdoor-rated enclosure eliminates need for a separate climate-controlled cabinet.
• Delivers 802.3af PoE (up to 13W per port) to power IP PTZ cameras over data cable.
• 60 Hz operation suits IP surveillance deployments requiring stable power distribution.

Geovision

SKU: 84-SDIREPE-001U

Geovision 84-SDIREPE-001U GV HD-SDI Repeater

• Active signal regeneration eliminates ghosting and attenuation on long coaxial runs.
• Extends HD-SDI transmission beyond 300 ft where passive cabling alone would fail.
• Operates on 12V DC; integrates directly with GV-DVR HD-SDI and GV-Hybrid recorders.

Geovision

SKU: 85-NAS2008-001U

Geovision 85-NAS2008-001U Linux-Based NAS Accessory

• Linux-based OS delivers stable 24/7 uptime for continuous surveillance recording workloads.
• SMB/CIFS and NFS support integrates over standard Ethernet with Geovision and third-party tools.
• Native Geovision platform support eliminates cross-platform middleware on heterogeneous deployments.

Geovision

SKU: GV-APOE0811

Geovision GV-APOE0811 8-Port PoE+ Switch

8-port PoE+ gigabit switch for IP cameras and networked security devices

• 8 gigabit PoE+ ports deliver 802.3at power, eliminating separate injectors per device.
• 2 dedicated gigabit uplinks enable clean backbone aggregation and direct NVR integration.
• Managed architecture supports VLAN, QoS, and port mirroring for segmented security networks.

Geovision

SKU: GV-APOE0811-140

Geovision GV-APOE0811 8-Port PoE+ Switch

8-port PoE+ switch with gigabit uplinks for IP camera deployments

• All 8 ports deliver 802.3at PoE+ power, eliminating separate injectors for PTZ cameras.
• 140W total power budget supports simultaneous operation of multiple high-draw IP devices.
• Two dedicated gigabit uplinks provide clean backhaul separation to NVRs or core switches.

Geovision

SKU: GV-APOE1612

Geovision GV-APOE1612 16-Port PoE Switch

16-port Gigabit PoE switch with extended distance power for IP cameras

• 250W PoE+ budget across 16 gigabit ports powers up to 20 IEEE 802.3af/at cameras.
• Extended PoE reach to 250m at 10 Mbps eliminates separate power runs to remote cameras.
• 4-port SFP plus 2-port combo uplinks connect to backbone without consuming PoE ports.