Axis

SKU: 02630-001

Axis TD8901 Sfp+ Module Lc.lr.x - 02630-001

SFP+ fiber module with 10km range for long-distance network links

• LC connector, 10 km transmission range for extended connectivity runs
• Operates -40°C to 60°C in industrial and outdoor network environments
• SFP+ MSA compliant for broad compatibility with standard network switches

Axis

SKU: 02631-001

Axis TD8902 SFP+ Module LC.SR - 02631-001

10 Gbps SFP+ transceiver for Axis fiber networks up to 400m

• 10GBASE-SR multimode LC duplex with 850nm wavelength
• 400 meter maximum distance on standard multimode fiber
• Hot-pluggable design operates -40°C to 85°C

Axis

SKU: 03064-001

Axis TD8911 SFP28 Fiber Module 25Gbps - 03064-001

25Gbps SFP28 fiber module for long-distance camera aggregation

• 25 Gbps SFP28 fiber module (25GBASE-LR) at 1310nm
• LC duplex connector for the Axis D8308 aggregation switch
• Carries dozens of 4K camera streams over single-mode fiber

Axis

SKU: 03065-001

Axis TD8912 SFP28 Fiber Transceiver Module - 03065-001

SFP28 fiber transceiver for Axis D8308 with 100m IR night vision

• SFP28 fiber transceiver (hot-swappable, multimode)
• LC duplex connector carries signals up to 100 meters
• Field-swap in under 5 minutes without switch reboot

Axis

SKU: 02647-001

Axis TU9004 Wireless Dongle - 02647-001

Compact Wi-Fi dongle for wireless Axis camera deployment

• Dual-band 802.11ac support on 2.4 GHz and 5 GHz frequencies
• Ultrasmall 29.5 × 15 × 8 mm form factor weighs just 3.3 g
• Operates reliably across 0°C to 35°C temperature range

Bosch

SKU: ANT-FP

Bosch Flatpanel Antenna - ANT-FP

• Flatpanel antenna for Bosch surveillance and wireless security
• Drops into deployments where external antennas are impractical
• Discreet flatpanel form factor for indoor and protected outdoor install

Camden

SKU: CX-LRS12

Camden 12V Latching Relay Assembly for EM Call System - CX-LRS12

12/24 VDC latching relay for EM call systems with TCP/IP control

• Dual-voltage 12/24 VDC output for door strikes and access devices
• TCP/IP networked control integrates with existing security systems
• UL 294 and ULC S533 certified for access control applications

Camden

SKU: CX-TRX-4024

Camden 24 VAC 40 VA Standard mount transformer - CX-TRX-4024

• Delivers 24 VAC / 40 VA output to power EM locks, electric strikes, and relay circuits.
• Compact 2″×2⅜″×2½″ body fits standard electrical boxes and surface-mount enclosures.
• 120 VAC 60 Hz input with transformer isolation; 3-year warranty covers access control deployments.

Camden

SKU: CX-TRX-2024

Camden 24 VAC, 20 VA, Fused, Standard mount transformer

24 VAC, 20 VA fused transformer for access control systems

• 24 VAC 20 VA fused transformer for access control aux power
• Built-in fusing protects downstream loads from short-circuit damage
• Standard-mount form factor fits compact head-end and panel cabinets

Camden

SKU: CX-LRS24

Camden 24V Latching Relay Assembly for EM Call System - CX-LRS24

• Latching relay holds door strike state on momentary trigger, eliminating continuous coil current draw.
• Selectable 12/24VDC output bridges mixed legacy and modern strike circuits without added converters.
• TCP/IP connectivity enables remote latch/reset control and status monitoring from networked AC panels.

Camden

SKU: CX-TRK-2450

Camden 24VAC, 40VA standard mount transformer and AC to DC Rectifier

24VDC 40VA transformer-rectifier for access control and security systems

• Converts 24VAC input to regulated 24VDC output for door control devices
• Standard DIN rail and panel mount for typical security enclosure integration
• AC to DC rectification with voltage regulation for TCP/IP networked systems

Camden

SKU: CV-603EA

Camden 433 Mhz. extension antenna for MProx-BLE Controller, 8 feet...

8-foot 433 MHz extension antenna for Camden MProx-BLE Controller range

• 8-foot cable length extends wireless signal reach to distant readers
• 433 MHz frequency compatible with MProx-BLE Controller deployments
• TCP/IP communication integrates with networked access control systems

Camden

SKU: CX-5024

Camden CX-5024 AC-DC Rectifier 50 VA

• Converts 120V AC mains to regulated DC, eliminating ripple that degrades solenoids.
• 50 VA capacity supports up to three mag locks or electric strikes without voltage sag.
• Built-in thermal cutoff and over-current protection prevent damage under fault conditions.

Camden

SKU: CX-SA1

Camden CX-SA1 TCP/IP Network Switch Lock

• TCP/IP integration routes lock events and audit logs through your central management platform.
• Form C relay (NO/NC) supports both fail-safe and fail-secure door configurations at 2A/24V.
• Included MOV suppressor protects relay contacts from back-EMF damage on 24/7 duty cycles.

Camden

SKU: CX-TRX-5024

Camden CX-TRX-5024 24 VAC 50 VA Standard Mount Transformer

24 VAC 50 VA transformer for networked access control systems

• 50 VA output at 24 VAC for electronic locks, readers, and controllers
• Standard wall or enclosure mount compatible with TCP/IP access platforms
• Supports single and multi-door installations with Class 2 rated output

Code Blue

SKU: SLNP0101

Code Blue 1-Port PoE Injector Indoor Use Only - SLNP0101

• Single-port PoE injector delivers power and data over one Ethernet cable.
• Compatible with Code Blue IP1500, IP2500, IP5000, LS1000, LS2000, and IA4100.
• Mounts to wall, pole, or rack rail — no separate power supply required indoors.