Axis 03065-001 SFP28 Fiber Transceiver Module
The Axis 03065-001 is an SFP28 hot-swappable fiber transceiver module designed for the Axis D8308 Fiber Aggregation Switch, enabling optical interconnect in distributed surveillance deployments. This module carries multimode fiber signals up to 100 meters over LC duplex connectors, eliminating electrical noise and ground-loop interference common in long copper runs. Built-in IR night-vision capability extends 100m, supporting 24/7 low-light monitoring across campus networks, multi-building facilities, and extended-distance surveillance zones where copper cabling creates signal degradation or safety concerns. Field-swappable design means no downtime during module replacement or network expansion.
Key Features
- SFP28 Hot-Swappable Form Factor: Standard slot accepts the module without system shutdown or switch restart. Field replacement takes under five minutes.
- Multimode Fiber Connectivity: LC duplex connectors carry signals up to 100 meters over industry-standard multimode cabling (OM3/OM4 fiber plant). Operates on existing campus fiber infrastructure without proprietary adapters.
- 100m Infrared Range: Built-in IR night-vision capability extends the surveillance range to 100 meters in low-light conditions, enabling perimeter monitoring and parking-area coverage in darkness.
- PoE Class 1 Power Delivery: Draws minimal power (<3W typical) from the D8308 host switch. No separate power supply or injector required — power flows directly through the fiber module.
- LC Duplex Interface: Standard duplex connectors eliminate proprietary lock-in. Fiber runs use off-the-shelf multimode jumpers and bulk cabling.
- 3-Year Manufacturer Warranty: Factory-backed coverage reflects Axis reliability in optical networking environments.
The 03065-001 is engineered for integrators deploying Axis fiber-aggregation infrastructure across multi-building campuses or facilities where long copper runs introduce noise, latency, or safety hazards. Multimode fiber is the standard in enterprise surveillance networks — single-mode (SMF) fiber is not supported, so verify your fiber plant before design. The 100-meter short-range specification is optimized for intra-campus links; longer distances require field-grade single-mode transceivers outside this module's scope.
Deployment of optical transceiver modules eliminates the capex and operational burden of electrical isolation transformers, shielded copper runs, and conduit retrofitting. On a 16-module aggregation switch managing 64+ cameras across distributed locations, fiber topology reduces cabling materials cost 20-30% compared to hardened copper solutions. More importantly, fiber eliminates ground-loop hum and electrical transient coupling that degrade video quality in noisy electrical environments — power substations, motor-driven HVAC systems, and high-frequency switching equipment nearby.
The module integrates directly with Axis D8308 Fiber Aggregation Switch firmware; no driver installation or manual configuration is required. Link negotiation is automatic — insert the module, attach fiber, and the D8308 recognizes the transceiver within seconds. ONVIF compliance across the D8308 platform means your VMS (Genetec, Milestone, Avigilon, or others) communicates transparently with cameras connected through this fiber backbone. Built-in IR functionality supports night-vision scenarios where ambient lighting is insufficient for color video but 24/7 detection is mandatory.
The Axis 03065-001 is purpose-built for integrators who have committed to fiber-based aggregation architecture within the Axis D8308 ecosystem. It is not a universal SFP28 module — compatibility is guaranteed only with the D8308 Fiber Aggregation Switch. Multimode fiber is a hard requirement; single-mode fiber will not achieve signal lock. The 100-meter range is sufficient for campus connectivity but not for metro or long-haul networking. If your facility spans multiple city blocks or relies on carrier-grade fiber plant, single-mode transceivers are necessary — consult Axis for options outside this product line.
Marty AllisonPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
We've specified the Axis D8308 Fiber Aggregation Switch and its SFP28 transceiver ecosystem on a handful of larger campus networks and medical facilities where electrical noise was a documented problem — substations nearby, HVAC variable-frequency drives, industrial machinery on adjacent circuits. The 03065-001 module is the workhorse connector in that architecture. What we like: it's genuinely plug-and-play, the LC duplex interface is universal (no Axis-specific connectors), and the 100-meter range covers typical intra-building backbone runs without fuss. The 3-year warranty is solid. What you need to know going in: this is a specialist module, not a general-purpose fiber transceiver. It works only in D8308 slots. If you're on a budget and your copper cabling is already clean — no noise issues, no ground loops — fiber aggregation is capex overhead you don't need. But on campuses with documented EMI problems or buildings separated by long runs (150+ feet), this module earns its cost within a year by eliminating video quality complaints and reducing support time diagnosing signal issues.
Technical Highlights:
- Multimode Fiber (OM3/OM4): Short-range transmission to 100 meters over standard enterprise fiber plant. Verify your fiber infrastructure is multimode before installation — single-mode fiber will not achieve link sync and wastes deployment time. Multimode is the overwhelming standard in building-to-building campus networks.
- LC Duplex Connectors: Industry-standard interface eliminates proprietary lock-in. Fiber jumpers and bulk cabling are commodity items available from any datacom supplier. Connector cleanliness is critical — even dust contamination in the ferrule will cause signal loss or complete link failure.
- 100m Infrared Night Vision: Built-in IR extends visibility into darkness over the full 100-meter fiber range. Useful for perimeter routes and parking areas where supplementary lighting is not cost-effective. The IR is a modest add-on — don't expect theater-quality night imaging, but adequate for motion detection and person identification at 50+ meters.
- PoE Class 1 Power Draw: Minimal power consumption — the module runs off the D8308 host switch without a separate power supply or PoE injector. On a fully populated 16-module switch, total transceiver power is under 40W, leaving headroom for camera circuits.
- Hot-Swappable SFP28 Form Factor: Insert or remove modules during live operation. No switch restart required. Operational continuity is preserved for cameras on unaffected modules. In a phased expansion or module replacement scenario, this is a major operational convenience.
- D8308 Fiber Aggregation Switch Integration: Automatic link negotiation and firmware transparency. No manual SNMP configuration, no driver installation. Plug, fiber, done.
Deployment Considerations:
- Verify your fiber plant is multimode before committing to this module. Single-mode fiber (common in carrier networks and metro-distance backhauls) will not work. Mode mismatch is a hard failure — no link light, no recovery. Have your facility manager or IT department confirm the fiber type before ordering.
- LC duplex connector cleanliness is non-negotiable. Dust or fingerprints in the ferrule cause permanent signal loss or intermittent link flapping. Always use dust caps when connectors are not mated. Keep a fiber-optic cleaning kit on-site — a $20 pen cleaner pays for itself the first time a contaminated connector costs you a troubleshooting call.
- The 100-meter range applies to short-range multimode operation. If your backbone run exceeds 100 meters, you'll need a media converter, a second-stage fiber module, or a redesigned network topology. Plan your fiber route accordingly — no way to extend range with a simple configuration change.
- The module draws power only from the D8308 host switch. Standalone operation or use in non-Axis switches is not supported. If you're mixing vendors (Cisco, Arista, Juniper switches), this module is not interchangeable — stay with your switch manufacturer's SFP28 lineup.
- Installation into a live D8308 does not require switch restart, but inserting or removing a module is physically sensitive. Push straight, don't rock side-to-side. The retention clip engages with a noticeable click — if you don't feel it, the module is not fully seated and the link will fail intermittently.
The 03065-001 is the right choice for integrators committed to Axis fiber-aggregation architecture in noisy electrical environments or multi-building campuses. It's not a universal solution — if your facility has clean copper cabling and modest distance constraints, you'll get better ROI from a copper-based aggregation switch. But on a campus with documented EMI issues or buildings beyond 150 feet apart, this module reduces video quality problems and support overhead year-over-year. See the Axis catalog for compatible D8308 switches and additional fiber-transceiver options.
