DMP products
-
DMP
SKU: 777
DMP 777 Protective Keypad Cover
Protective polymer cover for NFC keypads in high-traffic access points
- Clear polycarbonate housing preserves full NFC/13.56 MHz read-through performance.
- Key lock prevents unauthorized cover removal at high-traffic entry points.
- Spare gasket included supports one replacement cycle for sustained environmental seal.
-
DMP
SKU: 763
DMP 763 Wi-Fi Interface Module
Wi-Fi interface for DMP keypad systems—wireless retrofit or new build
- Adds 2.4GHz Wi-Fi to DMP XT/XR panels—no network cable run required.
- Auto-fails over to cellular if Wi-Fi drops, maintaining signal path continuity.
- Draws 12VDC directly from panel supply; no external power adapter needed.
$141.00 $84.99 Save $56.01The item has been added -
DMP
SKU: 7463-W
DMP 7463-W Network Thinline LCD Keypad with Prox Reader
Network LCD keypad with dual PIN and proximity card access
- Network communication eliminates dedicated wiring runs, simplifying multi-keypad deployments.
- Integrated proximity reader supports dual-credential (PIN + prox card) access from one device.
- Built-in 4-hour backup battery maintains operation during AC loss without an external enclosure.
$452.00 $228.99 Save $223.01The item has been added -
DMP
SKU: 721T
DMP 721T Terminal Block Module
TCP/IP terminal block module for multi-door access control expansion
- Consolidates zone wiring for DMP XR series panels in a compact box-form module.
- Accepts 14–22 AWG conductors, covering standard sensor and detector loop gauges.
- Pre-installed per-zone EOL resistors eliminate discrete end-of-line components in field.
$34.00 $28.99 Save $5.01The item has been added -
DMP
SKU: 719T
DMP 719T Terminal Board Expansion Module
Modular terminal board expansion for DMP systems with plug-in slots
- Extends DMP 714 Zone Expander wiring capacity via direct plug-in — no adapters needed.
- Accepts 14–22 AWG wire with individual 1K EOL resistors for supervised zone circuits.
- Integrated LX-Bus pass-through eliminates external terminal blocks and junction boxes.
$61.00 $52.99 Save $8.01The item has been added -
DMP
SKU: 716T
DMP 716T Plug-In Screw Terminal Module
Plug-in screw terminal module for DMP system expansion slots
- Replaces the standard DMP 716 harness with individual screw terminals for field wiring.
- Plug-in connector seats directly into the 716 Output Expansion Module socket—no adapters needed.
- Accepts 18–22 AWG stranded wire, suitable for alarm loops, relay contacts, and 12VDC returns.
$45.00 $38.99 Save $6.01The item has been added -
DMP
SKU: 712-8
DMP 712-8 Zone Expansion Module
8-zone expansion module for DMP panel systems at 15VDC
- Adds 8 supervised burglary zones to a DMP panel without replacing or redesigning the system.
- Plug-in module slot with dip switch addressing keeps installation compact and wiring minimal.
- Pre-installed EOL resistors enable immediate zone supervision straight out of the box.
$88.00 $44.99 Save $43.01The item has been added -
DMP
SKU: 711S
DMP 711S Zone Expansion Module
TCP/IP zone expansion module for compatible DMP security systems
- Adds a single addressable zone via flying-lead to DMP XT/XR panels without hardware replacement.
- TCP/IP communication enables distributed zone supervision across multi-site deployments.
- Ships with 1k ohm resistor; UL 365/864/1076 and CSFM/FDNY listed for fire-rated installs.
$34.00 $17.99 Save $16.01The item has been added -
Add to Cart The item has been addedDMP
SKU: 710
DMP 710 Bus Splitter/Repeater Module
TCP/IP bus splitter/repeater for multi-building access control networks
- Repeats bus signals over extended runs, eliminating dropouts beyond 500 ft.
- TCP/IP communication supports distributed reader architecture across multi-building sites.
- Runs on 15VDC and wall-mounts at 4.5"×2.75"×1.75" for tight IDF or junction installs.
$80.00 $41.99 Save $38.01The item has been added -
DMP
SKU: 708
DMP 708 Bus Extender Modules
15VDC bus extender for DMP multi-zone system expansion
- Regenerates LX-Bus signal timing and amplitude to prevent data corruption on long runs.
- Operates across 8–15 VDC input range, compatible with standard DMP distributed power supplies.
- Mitigates EMI and crosstalk in noisy environments alongside power and telephone cabling.
$557.00 $282.99 Save $274.01The item has been added -
DMP
SKU: 698
DMP 698 Keypad Wall Cover
Wall-mount keypad cover with durable polymer housing for access control
- Covers existing wall cavities at 7.4" x 11" — no extra drilling required.
- Engineered for DMP LCD keypads, standardizing mounting footprint across all doors.
- Lightweight plastic construction suits drywall, block, or prepared wall surfaces.
$51.00 $28.99 Save $22.01The item has been added -
DMP
SKU: 694-W
DMP 694-W Keypad Backplate
Door-frame backplate for NFC/13.56MHz keypad readers
- White metal backplate covers existing door cutouts without full door modification.
- 8.25" W × 6.5" H footprint fits standard door-frame LCD keypad retrofit installations.
- White powder-coat finish suits indoor commercial access control deployments.
$41.00 $36.99 Save $4.01The item has been added -
DMP
SKU: 694-7800-W
DMP 694-7800-W Keypad Backplate
Replacement backplate for DMP PIN-entry keypad readers
- Covers legacy Bosch/Radionics and DMP 600/700 Series wall cavities without patching.
- 8.25" × 6.5" footprint accommodates existing screw holes, eliminating conduit rework.
- Passive mechanical component — installs atop existing wiring runs for 7800 Series keypads.
$41.00 $36.99 Save $4.01The item has been added -
DMP
SKU: 352PM-G
DMP 352PM-G Power Distribution Enclosure with Transformers
Extra-large steel enclosure with integrated transformers for security and telecom
- 14.5"×32"×4" steel enclosure provides ample room for components and cable routing.
- Ships with 505-12 power supply and 100 VAC wire-in transformer pre-installed.
- TCP/IP support allows direct network communication with enclosure-mounted controllers.
$932.00 $590.99 Save $341.01The item has been added -
DMP
SKU: 352P-G
DMP 352P-G Extra Large Panel Enclosure
Extra large panel enclosure with 324 VA transformer for access control and building automation
- 14.5"×32"×4" interior accommodates multi-device layouts, relay banks, and wiring runs.
- Integrated 324 VA 100VAC wire-in transformer eliminates separate sourcing and reduces install time.
- 505-12 power supply comes pre-installed, reducing bench assembly steps before field deployment.
$1,132.00 $566.99 Save $565.01The item has been added -
DMP
SKU: 349A-G
DMP 349A-G Attack Panel Enclosure
TCP/IP attack panel enclosure for networked DMP security systems
- 16-gauge rolled steel door resists forced entry in high-risk control areas.
- Integral tamper switches detect enclosure breach and trigger immediate alerts.
- Dual-size cable knockouts support flexible conduit routing for panel wiring.
$187.90 $95.99 Save $91.91The item has been added -
DMP
SKU: 349
DMP 349 Panel Enclosure
Metal panel enclosure for DMP control systems and access control
- Fits two 7.7 Ah backup batteries to maintain uptime during brief power outages.
- Keyed lock prevents unauthorized access to mounted control electronics.
- Dual-size knockouts enable flexible cable routing without pre-drilling.
$13.99The item has been added -
DMP
SKU: 341
DMP 341 Panel Enclosure
TCP/IP panel enclosure for retrofit and new security installations
- Pre-drilled mounting holes secure DMP XT/XR Series panels and transformers without custom work.
- Dual knockout ports in .75" or .5" sizes provide flexible conduit and cable entry routing.
- Gray powder-coat steel construction resists corrosion for reliable indoor wall-mount deployments.
$0.99The item has been added -
DMP
SKU: 2WT-BLX
DMP 2WT-BLX System Sensor Smoke Detector
Wireless smoke detection for DMP systems without hardwiring
- Wireless communication eliminates conduit runs for faster deployment in occupied spaces.
- Integrates with DMP XR Series panels via LX-Bus as an addressable single-point module.
- Built-in fixed-temperature thermal detector triggers above 135°F for dual-mode detection.
$152.00 $77.99 Save $74.01The item has been added -
DMP
SKU: 271
DMP 271 Ground Fault Detection Module
Ground fault detection module for DMP fire alarm systems
- Monitors field wiring against earth ground to catch faults invisible to standard zone supervision.
- Triggers a supervisory zone output so panels annunciate ground faults without raising a fire alarm.
- Supports NFPA 72 and AHJ ground fault annunciation mandates for commercial fire alarm deployments.
$16.99The item has been added
