Altronix NETWAYSP8WPX2 vs Altronix NETWAYSP8WP: Specification Comparison
Both the Altronix NETWAYSP8WPX2 and NETWAYSP8WP are 8-port outdoor PoE switches housed in stainless steel NEMA 4/4X, IP66-rated enclosures with integrated battery backup charging and dual 1G SFP fiber uplinks — making them direct cross-shop candidates for edge surveillance and access-control deployments requiring weatherproof, self-powered network infrastructure. The comparison centers on port-speed mix, PoE power architecture, physical form factor, and management capability, all of which differ meaningfully between the two models.
In This Guide
- How do the port speeds and PoE power budget compare between the NETWAYSP8WPX2 and NETWAYSP8WP?
- How do the physical enclosure, mounting options, and environmental ratings differ?
- What management, supervision, and battery backup capabilities does each switch offer?
- Which should you choose: the NETWAYSP8WPX2 or the NETWAYSP8WP?
- Side-by-Side Specs
- FAQ
How do the port speeds and PoE power budget compare between the NETWAYSP8WPX2 and NETWAYSP8WP?
The NETWAYSP8WPX2 provides 8 Gigabit Ethernet PoE ports, meaning every data port runs at up to 1 Gbps. The PoE budget is described as 2×60W Hi-PoE, which covers two high-power ports; total system PoE budget beyond those two ports is not explicitly stated in the provided specs.
The NETWAYSP8WP uses a mixed-speed architecture: 2 ports are 1G PoE/PoE+ and the remaining 6 ports are 10/100 PoE/PoE+. Its total integrated PoE budget is 120W, with up to 2×60W Hi-PoE on the two higher-speed ports. A separate spec entry lists 30W under 'Power Watts', which is inconsistent with the 120W figure; buyers should verify with the datasheet.
For deployments running high-bandwidth 4K or multi-sensor cameras on all eight ports, the NETWAYSP8WPX2's all-Gigabit port plane is the relevant differentiator. The NETWAYSP8WP's six 10/100 ports are adequate for standard HD cameras and most access-control panels but will cap throughput at 100 Mbps on those six connections.
How do the physical enclosure, mounting options, and environmental ratings differ?
Both units carry NEMA 4/4X and IP66 ratings in stainless steel enclosures, meaning both are suitable for direct outdoor mounting in wet and dusty environments. The NETWAYSP8WPX2 publishes explicit enclosure dimensions of 17.53" × 15.3" × 6.67" and supports wall, pole, and rack mounting. Its spec notes a pair of air vents must be oriented correctly per enclosure during installation.
The NETWAYSP8WP's mounting spec lists pole mount only; wall and rack options are not listed in the provided specs. Physical dimensions for the NETWAYSP8WP are not provided in the available data.
Storage temperature is specified only for the NETWAYSP8WPX2: –30°C to 85°C (–22°F to 185°F). No storage or operating temperature range is provided for the NETWAYSP8WP. Installers working in extreme-cold climates should note this data gap for the NETWAYSP8WP and consult its datasheet before specifying.
What management, supervision, and battery backup capabilities does each switch offer?
The NETWAYSP8WP is explicitly listed as LINQ capable — Altronix's remote supervision and management platform — enabling centralized monitoring of power and network status across multiple units. No LINQ or equivalent management capability is listed in the NETWAYSP8WPX2 specs.
Both models include integrated battery backup charging, supporting UPS-style continuity for connected PoE devices during a power outage. The capacity of the backup battery, charge current, and runtime are not specified for either model in the provided data.
For managed deployments where operators require remote visibility into switch health, power consumption, or fault alerts, the NETWAYSP8WP's LINQ capability is a concrete functional differentiator. The NETWAYSP8WPX2 does not list any equivalent supervision feature, which may limit it to unmanaged or locally-monitored installations.
Which should you choose: the NETWAYSP8WPX2 or the NETWAYSP8WP?
Our take: The NETWAYSP8WPX2 is the stronger choice when all eight PoE ports must carry high-bandwidth video streams and the installation demands flexible mounting — wall, pole, or rack. Its all-Gigabit port plane eliminates the 100 Mbps bottleneck present on six of the NETWAYSP8WP's eight ports, its enclosure dimensions (17.53" × 15.3" × 6.67") are documented for panel planning, and it supports three mount types versus the NETWAYSP8WP's listed pole-only option. Conversely, the NETWAYSP8WP is the stronger choice for managed deployments: its LINQ supervision capability — absent from the NETWAYSP8WPX2 spec sheet — provides remote monitoring critical for distributed or unstaffed sites. Both carry lifetime warranties, NEMA 4/4X IP66 ratings, dual 1G SFP uplinks, and integrated battery backup charging. Specify the NETWAYSP8WPX2 for high-throughput, flexibly mounted edge nodes; specify the NETWAYSP8WP where LINQ-based remote supervision is a site or contract requirement.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Altronix NETWAYSP8WPX2 | Altronix NETWAYSP8WP |
|---|---|---|
| Product Type | PoE Switch | PoE Switch |
| Total PoE Ports | 8 | 8 |
| Port Speed — Data Ports | 8× Gigabit (1G) | 2× 1G + 6× 10/100 |
| PoE Standard | PoE+ (802.3at) | PoE+ (802.3at) |
| Hi-PoE Ports | 2× 60W Hi-PoE | 2× 60W Hi-PoE |
| Total PoE Budget | Not explicitly stated (2×60W noted) | 120W |
| Fiber Uplinks | Dual 1G SFP | Dual 1G SFP |
| Enclosure Rating | NEMA 4/4X, IP66 | NEMA 4/4X, IP66 |
| Enclosure Material | Stainless steel | Stainless steel |
| Mount Types | Wall, Pole, Rack | Pole only (per spec) |
| Enclosure Dimensions | 17.53" × 15.3" × 6.67" | — |
| Battery Backup | Yes (integrated charger) | Yes (integrated charger) |
| Remote Management | — | LINQ capable |
| Storage Temperature | –30°C to 85°C (–22°F to 185°F) | — |
| Environment Rating | Outdoor | Outdoor |
| Warranty | Lifetime | Lifetime |
Frequently Asked Questions
Which should you choose: the NETWAYSP8WPX2 or the NETWAYSP8WP?
The NETWAYSP8WPX2 is the stronger choice when all eight PoE ports must carry high-bandwidth video streams and the installation demands flexible mounting — wall, pole, or rack. Its all-Gigabit port plane eliminates the 100 Mbps bottleneck present on six of the NETWAYSP8WP's eight ports, its enclosure dimensions (17.53" × 15.3" × 6.67") are documented for panel planning, and it supports three mount types versus the NETWAYSP8WP's listed pole-only option. Conversely, the NETWAYSP8WP is the stronger choice for managed deployments: its LINQ supervision capability — absent from the NETWAYSP8WPX2 spec sheet — provides remote monitoring critical for distributed or unstaffed sites. Both carry lifetime warranties, NEMA 4/4X IP66 ratings, dual 1G SFP uplinks, and integrated battery backup charging. Specify the NETWAYSP8WPX2 for high-throughput, flexibly mounted edge nodes; specify the NETWAYSP8WP where LINQ-based remote supervision is a site or contract requirement.
Which switch is better if I need to run 4K IP cameras on all eight ports?
The NETWAYSP8WPX2 is the better fit. All eight of its PoE ports are Gigabit, so every camera connection can sustain up to 1 Gbps. The NETWAYSP8WP has only two 1G PoE ports; the other six run at 10/100 Mbps, which caps throughput at 100 Mbps per port and may constrain high-bitrate 4K streams on those connections.
Can I monitor either of these switches remotely without being on-site?
Yes, but only the NETWAYSP8WP is listed as LINQ capable in the provided specs. LINQ is Altronix's remote supervision platform for monitoring power and network status. The NETWAYSP8WPX2 does not list LINQ or any equivalent remote management feature, so remote supervision would depend on external network-management tools rather than a native Altronix capability.
Do both switches work with battery backup, and are they rated for the same outdoor conditions?
Both models include integrated battery backup charging and both carry NEMA 4/4X and IP66 ratings in stainless steel enclosures, confirming outdoor suitability for wet and dusty environments. Battery capacity, runtime, and operating temperature range are only partially specified: storage temperature (–30°C to 85°C) is documented for the NETWAYSP8WPX2 but not for the NETWAYSP8WP. Consult each product's datasheet for full battery and thermal specifications before final selection.
More Network Switch Comparisons
- Vivotek IHT-1271 vs TP-Link SG3210XHP-M2
- Vivotek IHT-1271 vs TP-Link S4500-8GP2F
- Vivotek IHT-1271 vs TP-Link SG1210P
- Vivotek IHT-1271 vs Allied Telesis AT-x530L-10GHXm-10
- Vivotek IHT-1271 vs Vivotek GEV-108A-130
- Vivotek IHT-1271 vs Vivotek IHT-1000
Network Switch Buying Guides
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.