Covers & Protection
Sub categories
Showing Results for Covers & Protection
-
Comelit
SKU: UT9179
Comelit UT9179 Surface-Mounted Wall Housing
Surface-mounted 4MP housing for Comelit 9 Ultra intercom systems
- Holds nine 9 Ultra modules in a 3×3 grid within a 332×289×35 mm wall footprint.
- Die-cast aluminum frame with cataphoresis treatment resists corrosion in coastal or industrial environments.
- Tool-free friction-fit module retention and included interconnect cable reduce field assembly time.
$952.48 $648.99 Save $303.49The item has been added -
Comelit
SKU: UT9184H
Comelit UT9184H Rain Shield for Flush Housing 2x2 Ultra
Weather shield for Comelit 2x2 Ultra flush housing, PoE+ powered
- Grey-anodised aluminium construction resists corrosion for long-term exterior use.
- Fits 2x2 Ultra flush housing (4 modules); no additional wiring or power required.
- At 259×232×32 mm, verify wall clearance before mounting to avoid conduit conflicts.
$575.21 $391.99 Save $183.22The item has been added -
Comelit
SKU: UT9191
Comelit UT9191 Rainshield Surface-Mounted Wall Housing
Weatherproof 4MP wall housing with PoE+ for outdoor Comelit systems
- Anodised aluminium shell resists corrosion in coastal and industrial outdoor environments.
- Compact 116×112×57 mm envelope fits a single Comelit Ultra surface-wall entrance module.
- Power and signal pass through unchanged, preserving PoE delivery to the mounted module.
$174.96 $173.99 Save $0.97The item has been added -
Comelit
SKU: UT9192
Comelit UT9192 Rainshield Surface-Mounted Wall Housing
Surface-mounted 4MP rainshield housing for outdoor intercom entry points
- PoE+ (802.3at) lets one Ethernet cable carry video and power
- Surface-mount rain shield for 2560x1440 outdoor entrance panels
- Removes separate 12VDC or 24VAC runs at outdoor mount points
$209.95 $208.99 Save $0.96The item has been added -
Comelit
SKU: UT9193
Comelit UT9193 Surface-Mounted Rainshield Wall Housing
Surface-mount rainshield housing for 4MP IP cameras with PoE+ power
- PoE+ (802.3at) eliminates 12VDC runs to outdoor mount locations
- Surface-mount rain shield for 2560x1440 outdoor entrance panels
- Single Cat5e/6 cable carries both video and power on retrofits
$265.91 $181.99 Save $83.92The item has been added -
Comelit
SKU: UT9194
Comelit UT9194 Rainshield Surface-Mounted Wall Housing
Weather-sealed 4MP housing for outdoor wall-mount camera deployments
- Anodised aluminium rain shield for outdoor entrance panel install
- PoE+ (802.3at) compatible mount for 2560x1440 Ultra video panels
- Surface-mount wall housing weatherproofs exterior intercom drops
$321.92 $219.99 Save $101.93The item has been added -
Comelit
SKU: UT9196
Comelit UT9196 Rainshield Surface-Mounted Wall Housing
Surface-mounted rainshield housing for outdoor 4MP PoE+ cameras
- Houses 6 Ultra modules in 2 stacks of 3 side-by-side modules
- PoE+ (802.3at) compatible with 2560x1440 outdoor entrance panels
- Wall-mount rain shield for direct exterior surface installation
$439.28 $299.99 Save $139.29The item has been added -
Comelit
SKU: UT9198
Comelit UT9198 Rainshield Surface-Mounted Wall Housing
Weatherproof surface-mounted housing for 4MP PoE+ cameras
- Anodised aluminium rain shield for surface-mount network gear
- PoE+ (802.3at) compatible with 2560x1440 outdoor entrance panels
- Wall-mount housing for exposed exterior or indoor lobby placement
$483.27 $329.99 Save $153.28The item has been added -
Comelit
SKU: UT9199
Comelit UT9199 Rainshield Surface-Mounted Wall Housing
Weather-resistant 4MP wall housing with PoE+ for outdoor IP cameras
- Rain shield protects a 9-module Ultra entrance panel outdoors
- Anodised aluminium grey housing for direct exterior surface mount
- PoE+ (802.3at) compatible 2560x1440 panel weather protection
$519.86 $353.99 Save $165.87The item has been added -
Comelit
SKU: UT9305M
Comelit UT9305M Empty Glass Module Housing
4MP empty glass module with PoE+ for third-party camera integration
- PoE+ (802.3at) up to 30W per port over a single PoE+ switch port
- Empty glass module housing for Ultra entrance panel customization
- Single Cat5e/6 cable carries data and power, no AC conduit needed
$156.16 $155.99 Save $0.17The item has been added -
Digital Watchdog
SKU: DWC-DJSSLD
Digital Watchdog DWC-DJSSLD Sun Shield Cover for DJ Domes
- Sun shield cover extends DJ dome camera image clarity outdoors
- Reduces lens heat from direct sunlight in summer deployments
- Snap-on accessory for fast field retrofit on existing domes
$54.00 $53.99 Save $0.01The item has been added -
Digital Watchdog
SKU: DWC-MCBLU
Digital Watchdog DWC-MCBLU Micro Dome Trim Ring Blue
Blue trim ring for Digital Watchdog micro dome cameras
- Tool-free installation with no impact on camera performance
- Fade-resistant polymer construction for indoor and outdoor use
- Professional appearance across retail, corporate, education, healthcare
$38.00 $24.99 Save $13.01The item has been added -
Digital Watchdog
SKU: DWC-MCGRN
Digital Watchdog DWC-MCGRN Micro Dome Trim Ring Green
Green trim ring for Digital Watchdog micro dome cameras
- Tool-free attachment fits Digital Watchdog micro dome models
- Durable construction maintains color and integrity in any environment
- Vibrant green finish for branding and camera identification
$38.00 $24.99 Save $13.01The item has been added -
Digital Watchdog
SKU: DWC-MCRED
Digital Watchdog DWC-MCRED Micro Dome Trim Ring Red
Red trim ring for Digital Watchdog micro dome cameras
- Tool-free installation on compatible Digital Watchdog micro domes
- Vibrant red color for branding, identification, or location coding
- Durable high-quality construction for varied surveillance environments
$38.00 $24.99 Save $13.01The item has been added -
Digital Watchdog
SKU: DWC-PVXLMOD28
Digital Watchdog DWC-PVXLMOD28 2.8mm Lens Module
- 2.8mm wide-angle lens module with ~100-110 degree FOV
- Aluminum vandal housing for high-traffic outdoor zones
- IP66 weather-sealed with polycarbonate dome cover
$131.00 $130.99 Save $0.01The item has been added -
Digital Watchdog
SKU: DWC-PVXLMOD4
Digital Watchdog DWC-PVXLMOD4 4mm Lens Module
$131.00 $130.99 Save $0.01The item has been added
Covers & Protection
Covers and protective enclosures safeguard cameras, intercom devices, and other security equipment from weather exposure, tampering, and accidental damage. Proper protection extends device lifespan and helps maintain consistent system performance in demanding environments.
Plan Your Deployment
- Indoor vs outdoor exposure and weather rating requirements
- Vandal-resistant and impact protection needs
- Compatibility with specific device models
- Mounting method and clearance considerations
- Maintenance access and long-term durability planning
Covers & Protection — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 250 working models of covers & protection sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 4MP, 2MP, 20MP+, 6MP |
| IP Rating | IP66 |
| Connectivity | Wired |
| Power | PoE+, PoE |
| Type | Lock/Strike, Intercom, Controller, Accessory, Reader, Printer, Dome, Thermal |
| Night Vision | Yes |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.