Connectivity & Media
Sub categories
Showing Results for Connectivity & Media
-
Code Blue
SKU: CB1E00378
Code Blue CB1E00378 IP68 PoE Ethernet Cable
IP68 PoE Ethernet cable with M12 weatherproof connectors for outdoor installations
- M12 weatherproof connectors rated IP68 block moisture and dust in harsh environments
- PoE (802.3af) delivers power and data on one cable to field devices
- Sealed design suits outdoor, underground, and cabinet installations without rewiring
$5,840.00 $5,339.99 Save $500.01The item has been added -
Code Blue
SKU: CB1S00324
Code Blue CB1S00324 PoE Network Cable Assembly
IP68 PoE cable assembly for outdoor IP security and IoT deployments
- 802.3af PoE power + gigabit data in single RJ-45 cable run
- IP68 rating withstands dust and full water immersion in harsh sites
- Compatible with PoE switches, NVRs, and IP cameras at 10/100/1000 Mbps
$7,150.00 $6,537.99 Save $612.01The item has been added -
Code Blue
SKU: CB1S00397
Code Blue CB1S00397 IP Network Cable Assembly
IP68 PoE network cable for outdoor cameras and access points
- IP68-rated sealed connectors withstand moisture, temperature swings
- PoE (802.3af) powers cameras, access points, industrial equipment
- Built to NEMA 3, UL 62368-1 certified for wet/outdoor deployment
$6,890.00 $6,299.99 Save $590.01The item has been added -
Code Blue
SKU: CB6S00029
Code Blue CB6S00029 PoE Network Cable Assembly
IP68 PoE network cable for outdoor security cameras and access control
- 802.3af PoE power and data in one RJ45 connection for field or pre-assembled deployment
- IP68 rating withstands outdoor moisture, vandalism-prone environments, and harsh weather
- NEMA 4X carbon steel construction rated for pole-mount, wall-mount, and recessed installs
$750.00 $649.99 Save $100.01The item has been added -
Code Blue
SKU: CB6S00055
Code Blue CB6S00055 PoE Ethernet Cable Assembly
IP68 PoE Ethernet cable for outdoor security cameras and PoE devices
- 802.3af PoE power and data in one sealed RJ45 connector assembly
- IP68 rating withstands dust and water ingress in harsh outdoor conditions
- Outdoor-rated construction with sealed connectors for rugged installations
$275.99 $256.99 Save $19.00The item has been added -
Code Blue
SKU: CB9S00184
Code Blue CB9S00184 PoE Ethernet Cable IP68
IP68 sealed PoE Ethernet cable for outdoor network & surveillance
- RJ45 sealed connectors with IP68 rating block dust and moisture ingress
- PoE 802.3af support delivers power and data over single cable run
- Built to NEMA 4 for outdoor and industrial deployment environments
$625.00 $571.99 Save $53.01The item has been added -
Code Blue
SKU: QT192308
Code Blue QT192308 PoE Ethernet Cable Assembly
IP68 PoE ethernet cable for outdoor security cameras and access control
- 802.3af PoE standard powers networked devices without separate power runs
- IP68 dust and immersion rating withstands moisture and harsh outdoor conditions
- RJ45 connectors integrate with standard PoE infrastructure and security appliances
$1,711.00 $1,586.99 Save $124.01The item has been added -
Code Blue
SKU: SLNF0212
Code Blue SLNF0212 PoE Network Cable Assembly
Sealed PoE cable for security cameras in wet outdoor conditions
- RJ45 sealed connector with 802.3af PoE power in single cable run
- IP68 rated stainless steel construction withstands moisture and corrosion
- Compatible with PoE security cameras and network switch deployments
$5,120.00 $4,255.99 Save $864.01The item has been added -
Code Blue
SKU: SLNF0216
Code Blue SLNF0216 Stainless Steel PoE Network Cable
Stainless steel PoE cable rated IP68 for outdoor security
- IP68-rated stainless steel construction survives full submersion and salt spray.
- Delivers 802.3af PoE (13W max) and data in one run, eliminating dual cabling.
- ONVIF-compatible; integrates with Milestone, Genetec, and existing PoE switches.
$5,120.00 $4,389.99 Save $730.01The item has been added -
Code Blue
SKU: Z16186-06
Code Blue Z16186-06 PoE Network Cable Assembly
IP68 PoE cable for outdoor security—direct-burial rated, 802.3af
- IP68 sealing supports direct-burial and wet-location deployments without added enclosures.
- 802.3af PoE delivery powers cameras, readers, and IoT sensors up to 15.4W over a single cable.
- Outdoor-rated construction handles high-vibration and harsh environments for long-term reliability.
$9,400.00 $8,594.99 Save $805.01The item has been added -
Compulocks
SKU: 10FTALLUSBCB
Compulocks 10FT USB-C To USB-C 90-Degree Cable - 10FTALLUSBCB
- 10-foot USB-C to USB-C cable with 90-degree connector
- Right-angle plug reduces port strain in tight enclosures
- Supports power and data for modern USB-C devices
$31.00 $30.99 Save $0.01The item has been added -
Cradlepoint
SKU: 170700-000
Cradlepoint 170700-000 COR Extensibility Dock
Modular dock expands COR routers with 2 modem slots and GPIO I/O
- COR-series compatible expansion dock for Cradlepoint routers
- 2 modem expansion slots for MC400 modular modems
- 2x 10/100 Ethernet ports plus 2x10 GPIO connector with 5 GPIO
$199.99 $179.99 Save $20.00The item has been added -
Cradlepoint
SKU: 170871-000
Cradlepoint 170871-000 GPIO Cable Assembly
Industrial GPIO cable for DIN rail Cradlepoint deployments
- 3m GPIO cable for industrial DIN rail Cradlepoint deployments
- Bridges control signals between routers and edge device controllers
- Black 4-port 2.5G GPIO cable assembly accessory
$19.99The item has been added -
Cradlepoint
SKU: 170873-000
Cradlepoint 170873-000 USB to RS-232 Serial Cable
USB to RS-232 serial cable for Cradlepoint routers and legacy devices
- USB to RS-232 serial cable at 1.3 ft length
- USB Type-A male connector for any Cradlepoint USB port
- Works across multiple device families without proprietary plugs
$75.00 $74.99 Save $0.01The item has been added -
Add to Cart The item has been addedCradlepoint
SKU: 170585-001
Cradlepoint Inc 170585-001 GPIO Cable 3M 22AWG Black
3M GPIO cable with 22AWG for Cradlepoint router control signals
- 3m GPIO cable 22AWG for Cradlepoint router control signaling
- Black industrial cable for peripheral and edge device connectivity
- 2.5G rated GPIO cable accessory for Cradlepoint platforms
$14.49 $13.99 Save $0.50The item has been added -
Cradlepoint
SKU: 170623-002
Cradlepoint Inc 170623-002 Power Cable 250V C7 1.8M
European C7 power cable, 250V, 1.8m for Cradlepoint routers
- Europe Type C (CEE 7/16) to IEC 60320 C7 power cable, 1.8m length
- 250V AC for international Cradlepoint networking equipment deploy
- Direct OEM-branded power cable accessory for global power
$12.99The item has been added
Connectivity & Media
Connectivity and media components support reliable communication between cameras, access control devices, intercom systems, and network infrastructure. Proper cabling and connection hardware ensure stable performance, reduced signal loss, and long-term system reliability.
Plan Your Deployment
- Cable type selection (Ethernet, fiber, coaxial as applicable)
- Distance requirements and signal integrity planning
- Environmental considerations (indoor, plenum, outdoor-rated)
- Connector compatibility and termination standards
- Future expansion and structured cabling design
Connectivity & Media — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 2 working models of connectivity & media sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Type | Accessory |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.