ATEN 2L7D02H-1 High Speed HDMI Cable with Ethernet

Overview

The ATEN 2L7D02H-1 is a High Speed HDMI cable with Ethernet channel support, designed for installations where a single cable must carry uncompressed digital video, audio, and bidirectional network data between source and display devices. This matters in AV-over-IP and KVM deployments where cable runs and connection counts are tightly managed — consolidating HDMI and Ethernet into one run reduces panel clutter and eliminates the need for a separate network drop at the display end. The 2L7D02H-1 is factory-new and sourced from ATEN's commercial AV cable line.

Compatibility

Designed for use with ATEN KVM switches, matrix switches, extenders, and video distribution equipment that use HDMI connectivity — including ATEN's VM-series matrix switches, VE-series HDMI extenders, and CS-series KVM switches with HDMI ports. Also compatible with any source or display device conforming to the HDMI specification with Ethernet channel (HDMI 1.4 or later). Verify the specific port type and HDMI version requirement of your ATEN device before ordering, as ATEN produces HDMI cables in multiple lengths and connector configurations.

Installation Notes

Seat both connectors fully until the retention tab clicks — a partially seated HDMI plug is the most common cause of intermittent signal loss in rack and console installations. Keep bend radius gradual near the connector hood; sharp bends at the plug strain the internal conductors and degrade signal integrity over time, particularly at 4K refresh rates. Route away from power cables where possible to avoid interference pickup on longer runs.