Door Hardware & I/O
Sub categories
Showing Results for Door Hardware & I/O
-
Camden
SKU: CM-2060
Camden CM-2060 Key Switch SPDT Maintained Contact
Key-operated SPDT switch with dual relays, 30VDC, HID compatible
- Dual independent SPDT relays for simultaneous control of two circuits
- Maintained contact design holds signal stable while key is engaged
- 30VDC operation integrates with standard access control power supplies
$180.00 $110.99 Save $69.01The item has been added -
Camden
SKU: CM-2090
Camden CM-2090 Key Switch DPDT Maintained
DPDT maintained key switch with HID credential auth over TCP/IP
- 30VDC operation with latching contact for continuous strike control
- HID credential authentication integrated over TCP/IP network communication
- Compatible with TCP/IP-enabled access control platforms and door locks
$151.00 $91.99 Save $59.01The item has been added -
Camden
SKU: CM-2200
Camden CM-2200 Key Switch SPST Momentary N/O
- SPST momentary N/O contact delivers clean single-pulse triggering at 30VDC.
- Compact 1¾" flush-mount housing fits tight door frames without frame modification.
- Accepts 1", 1⅛", or 1¼" mortise cylinders for straightforward key standardization.
$128.00 $78.99 Save $49.01The item has been added -
Add to Cart The item has been addedCamden
SKU: CM-221/46
Camden CM-221/46 ValueWave Touchless Switch Single Gang
- Adjustable 2–8 in. IR detection range minimizes false triggers in high-traffic corridors.
- Form C dry relay (1A @ 30VDC) drives EM locks directly or feeds access control panel inputs.
- 10ms relay response and IP65 sealing suit sterile, wash-down, and high-volume entry points.
In stock · Ships same business day$120.00 $71.99 Save $48.01The item has been added -
Add to Cart The item has been addedCamden
SKU: CM-221/46N
Camden CM-221/46N ValueWave™ Touchless Switch Narrow Jamb
- IR activation at 2–8 inches eliminates contact, reducing cross-contamination risk.
- Form C relay output (1A @ 30VDC) drives EM locks and door operators without added modules.
- IP65 rating supports washdown environments including restrooms, kitchens, and wet areas.
In stock · Ships same business day$120.00 $73.99 Save $46.01The item has been added -
Camden
SKU: CM-221/46W
Camden CM-221/46W ValueWave™ Touchless Switch Double Gang
- IR touchless activation eliminates contact surfaces, reducing hygiene risk in high-traffic entries.
- TCP/IP connectivity enables remote audit logging and emergency unlock from access-control panels.
- Double-gang form factor fits standard wall boxes, simplifying retrofits at dual-door access points.
$120.00 $73.99 Save $46.01The item has been added -
Camden
SKU: CM-221/A42
Camden CM-221/A42 ValueWave Touchless Switch Single Gang
Network touchless switch with HID credentials and electromagnetic lock control
- TCP/IP connectivity for remote access management and real-time door status
- HID-compatible credentials integrate with existing card reader infrastructure
- 30VDC electromagnetic strike in single-gang form factor for retrofit installations
$120.00 $73.99 Save $46.01The item has been added -
Add to Cart The item has been addedCamden
SKU: CM-221/A42W
Camden CM-221/A42W ValueWave Touchless Switch Double Gang
- IP65-rated housing withstands washdowns and humidity in high-traffic entry points.
- Form C relay (1A @ 30VDC) integrates with any standard access panel—no proprietary interface.
- IR touchless activation removes hand-contact vectors; adjustable range 2–8 inches.
In stock · Ships same business day$120.00 $73.99 Save $46.01The item has been added -
Add to Cart The item has been addedCamden
SKU: CM-222/46
Camden CM-222/46 ValueWave Touchless Switch Single Gang
- Active IR sensor detects hand presence at 2–8 in. in 10 ms, eliminating touch points.
- 12–24 VDC relay output (1A/30VDC) drives EM locks or solenoid strikes in NO/NC configs.
- IP65-rated, −13°F to 122°F range suits indoor vestibules and outdoor-facing entries.
In stock · Ships same business day$120.00 $73.99 Save $46.01The item has been added -
Camden
SKU: CM-222/46N
Camden CM-222/46N ValueWave Touchless Switch Narrow Jamb
- IR touchless activation eliminates contact wear and cross-contamination in high-traffic areas.
- TCP/IP connectivity enables remote status reporting and audit trail integration over standard Ethernet.
- Narrow jamb profile fits 4.625-inch door frames without surface protrusion or swing obstruction.
$120.00 $73.99 Save $46.01The item has been added -
Camden
SKU: CM-222/46W
Camden CM-222/46W ValueWave Touchless Switch Double Gang
- Touchless IR microburst activation eliminates contact, reducing cross-contamination risk.
- Dual relay outputs (Common/N.O./N.C.) drive EM locks or signaling devices up to 1A/30VDC.
- IP65-rated; detection range and time delay tunable on-site for precise door-traffic tuning.
$120.00 $73.99 Save $46.01The item has been added -
Add to Cart The item has been addedCamden
SKU: CM-222/A42
Camden CM-222/A42 ValueWave Touchless Switch Single Gang
- IR microburst sensor detects hand presence at 2–8 inches, eliminating physical contact.
- Runs on 12–24VDC with 45mA peak draw; fits standard single-gang boxes for easy retrofit.
- 10ms activation latency and 0.5–20s adjustable hold time suit automatic door opener circuits.
In stock · Ships same business day$120.00 $73.99 Save $46.01The item has been added -
Camden
SKU: CM-222/A42N
Camden CM-222/A42N ValueWave Touchless Switch Narrow Jamb
- Active IR microburst sensor adjusts 2–8 in. detection; immune to ambient light and shadows.
- 1-3/4" jamb profile fits standard 4-7/8" frames—no wall excavation or frame modification needed.
- Dry-contact relay (C/NO/NC) integrates with any access control panel or standalone 24VDC lock.
$120.00 $73.99 Save $46.01The item has been added -
Camden
SKU: CM-2230
Camden CM-2230 Key Switch SPDT Maintained
- SPDT maintained action holds lock state without continuous input, supporting fail-safe wiring.
- Rated 30VDC for compatibility with standard low-voltage door strike and access control circuits.
- Mortise cylinder design accepts 1", 1-1/8", or 1-1/4" cylinders for mechanical key override deployments.
$144.00 $88.99 Save $55.01The item has been added -
Camden
SKU: CM-2250
Camden CM-2250 Key Switch SPDT Momentary
- SPDT momentary relay delivers a single pulse, preventing solenoid heating and lock chatter.
- Rated 30VDC for direct compatibility with standard low-voltage access control panels and strikes.
- Accepts 1", 1-1/8", or 1-1/4" mortise cylinders, enabling site-specific keying without module swap.
$197.00 $120.99 Save $76.01The item has been added -
Camden
SKU: CM-2290
Camden CM-2290 Key Switch DPDT Maintained
- DPDT contacts switch two independent 30VDC circuits simultaneously on one key rotation.
- Maintained logic holds position until manually reset—no sustained signal or pulse required.
- Accepts standard 1"–1¼" mortise cylinders, sourced and keyed independently by your locksmith.
$163.00 $99.99 Save $63.01The item has been added
Door Hardware & I/O
Door hardware and I/O components connect physical doors to your access control system. From electric strikes and magnetic locks to exit devices and relay modules, proper hardware selection ensures safe, compliant, and reliable operation.
Plan Your Deployment
- Fail-safe vs fail-secure lock configuration
- Door type (wood, metal, glass, storefront)
- Request-to-exit (REX) device requirements
- Power supply and voltage compatibility
- Local life-safety and fire code compliance
Door Hardware & I/O — Engineering-Grade Door Hardware for Commercial Deployments
This category covers 532 working models of door hardware & i/o sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Fail-safe versus fail-secure determines what happens during power loss. Fail-safe locks unlock on power loss (used on egress doors where life safety dominates); fail-secure locks remain locked (used on storage, server rooms, and exterior doors where security dominates). Code typically mandates fail-safe on stairwell and egress doors. Confirm with the AHJ before specifying — misapplied lock mode is a common code violation.
Strike, mortise, magnetic lock, and electrified panic hardware each have distinct installation, current draw, and code implications. Electric strikes work with most mechanical locksets and are easiest to retrofit. Magnetic locks (maglocks) provide high holding force on glass and wood doors but require dedicated REX and panic-bar interfaces for egress compliance. Verify the door's existing prep before choosing.
Power draw and inrush current dictate power supply sizing. A 5-door system with 1A peak per lock can exceed an undersized 12VDC supply at simultaneous lock-down events. Account for accessories — REX motion sensors, door-position switches, electrified levers — when sizing the supply and the battery backup required for code compliance.
Tamper switches, door-position monitoring, and request-to-exit sensors generate the audit trail your security team needs. Mechanical contact switches are cheaper; magnetic reed switches resist tampering better. Pair each door with a position switch and a REX sensor at minimum — without door-position monitoring, you can't distinguish 'authorized entry' from 'door held open after authorized entry,' which is a common compliance gap.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 8MP, 2MP |
| IP Rating | IP66, IP67 |
| Connectivity | Wired |
| Power | AC/DC, Battery |
| Type | Accessory, Controller, Cable, Switch, Power Supply, Access Card, Contact, Lock/Strike |
| Night Vision | Yes |
Top Brands in This Category
Frequently Asked Questions
Fail-safe or fail-secure for stairwell doors?
Fail-safe is mandatory on most stairwell doors and other code-designated egress paths — the lock must release on fire alarm or power loss to allow evacuation. Fail-secure on those doors is a code violation. Confirm the local fire code and AHJ requirements; commercial buildings in the U.S. follow NFPA 101 and the International Building Code, both of which detail egress lock behavior in detail.
What current draw should I plan for electrified locks?
Typical 12VDC electric strikes draw 200-500 mA continuous, with inrush spikes of 1-2A at engagement. Magnetic locks rated for 1,200 lbs holding force draw around 500 mA continuous at 24VDC. Power supplies need to handle simultaneous lock-down current — emergency lockdown events activate all locks at once. Size the supply with at least 25% headroom and confirm battery backup runtime requirements.
Do I need a request-to-exit (REX) sensor?
Most code-compliant electrified door installations require a REX sensor to shunt the alarm during authorized egress. Without REX, every egress event registers as a forced-door alarm. PIR motion sensors are the common choice and integrate with the door controller's REX input. Mechanical push-bar REX is also acceptable for hardware that includes that switch natively.
Can I use one lock for both card and mechanical key entry?
Yes — most electrified strikes and locks allow mechanical key override on the same door. Maintaining a master key for emergency mechanical access is required by code in many jurisdictions and recommended in all. Document the master key holders carefully; an uncontrolled master key program undermines the electronic audit trail.
What's the lifespan of a magnetic lock?
Quality maglocks (Securitron M62, HES, von Duprin) typically last 15-20 years with no mechanical wear. Failure points are the connector, the armature plate-to-lock alignment, and contamination of the magnetic face. Plan for armature replacement at year 10 as a hedge against alignment drift. Strike-type locks with mechanical parts last 5-10 years before strike-plate wear becomes a reliability issue.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.