Door Hardware & I/O
Sub categories
Showing Results for Door Hardware & I/O
-
Camden
SKU: CM-332
Camden Wired Touchless Switch, w/ built-in door control, 2 Relays, ...
Wired touchless switch with built-in logic for up to 3 doors
- Two relay outputs control strikes and latches across multiple entry points
- 30VDC operation with touchless activation—no contact required
- Wall, pendant, or recessed mount options for flexible installation
$281.00 $171.99 Save $109.01The item has been added -
Camden
SKU: CX-ESF-4
Camden Wood Frame Face Plate for CX-ED1309 brushed - CX-ESF-4
- Brushed aluminum trim conceals mounting gaps on wood frame CX-ED1309 installations.
- Direct compatibility with CX-ED1309 strike requires no wiring or power supply changes.
- Flat-mount design aligns to existing strike holes, minimizing rework during finishing.
$12.00 $11.99 Save $0.01The item has been added -
Camden
SKU: CX-ESF-4BZ
Camden Wood Frame Face Plate for CX-ED1309 dark - CX-ESF-4BZ
- Dark bronze factory finish matches CX-ED1309 hardware for a consistent door trim spec.
- Designed exclusively for CX-ED1309 magnetic lock; not compatible with CX-91S or CX-92S.
- Covers strike mounting edges on wood frames, reducing moisture ingress risk at the frame.
$12.00 $11.99 Save $0.01The item has been added -
Camden
SKU: CM-PT250-12
Camden Zamac endcaps, 12” length (Formerly CM-PTS14)
12" zamac endcaps for access control door hardware installations
- Zamac construction resists corrosion in standard indoor environments
- 12-inch length fits standard door opening frame assemblies
- Includes mounting screws, anchor plugs, and cable connectors
$18.00 $11.99 Save $6.01The item has been added -
DMP
SKU: CM-30E
DMP CM-30E Push to Exit Button
24VDC networked push-to-exit button for DMP access control
- Accepts 12 or 24 VDC supply, matching either DMP XT or XR Series panel output.
- SPDT contacts support NO or NC wiring to meet your panel's fail-safe configuration.
- Single-gang stainless faceplate fits standard electrical boxes; consumes one zone input.
$117.00 $59.99 Save $57.01The item has been added -
DMP
SKU: CM-310GPTE
DMP CM-310GPTE Slimline Push to Exit Button
Slimline push-to-exit button with TCP/IP networking for access control
- Runs on 24VDC, matching standard door-zone power supplies with no added distribution hardware.
- Native TCP/IP communication eliminates gateway hardware, reducing labor on networked deployments.
- HID credential compatibility lets integrators standardize reader ecosystems across the facility.
$85.00 $51.99 Save $33.01The item has been added -
HES
SKU: SC616NP
Eaton HES SC616NP Sonalert Fast Pulse 95dB Alarm
95dB fast-pulse audible alarm for security & access control
- 95dB fast-pulse output cuts through ambient noise in commercial environments
- Compact standalone device integrates with standard relay circuits & control boards
- Panel-mount form factor for retrofit and new security system installations
$156.00 $155.99 Save $0.01The item has been added -
Add to Cart The item has been addedELK Products
SKU: ELK-110
ELK Products ELK-110 Network Lock Strike Accessory
TCP/IP network strike for centralized multi-door access control
- TCP/IP network door strike control - no panel-to-strike relay wiring
- 5VDC operation simplifies low-voltage door hardware integration
- Network-attached strike control for multi-door access deployments
$120.00 $68.99 Save $51.01The item has been added -
Add to Cart The item has been addedELK Products
SKU: ELK-9002
ELK Products ELK-9002 Electronic Strike Lock Accessory
Electronic strike lock for ELK panel–controlled multi-door access
$47.36 $38.99 Save $8.37The item has been added -
Add to Cart The item has been addedELK Products
SKU: ELK-9022
ELK Products ELK-9022 Lock/Strike Accessory
Commercial lock/strike for multi-door ELK access control systems
$79.34 $47.99 Save $31.35The item has been added -
Geovision
SKU: 81-IRBIB65-001U
Geovision 81-IRBIB65-001U GV-Infrared Button
- IR line-of-sight triggering eliminates hardwired control runs to Geovision devices.
- AC control cable connection ensures stable power and signal over moderate distances.
- Compact gray housing mounts on consoles or guard stations without obstructing workspace.
$87.00 $65.99 Save $21.01The item has been added -
Geovision
SKU: 81-PB410-001
Geovision 81-PB410-001 PB41 Push Button Red
- Red housing enables instant visual identification in multi-button panels and kiosks.
- ACControl connector ensures direct compatibility with Geovision alarm panels and relay modules.
- Momentary contact switching delivers immediate gate or door strike release on each press.
$35.00 $26.99 Save $8.01The item has been added -
Geovision
SKU: 81-ST124-001
Geovision 81-ST124-001 GV-EL124S Electric Strike
- Fail-secure design defaults to locked on power loss, protecting high-security zones.
- 24V AC relay control integrates with any access panel supporting standard strike output.
- Multiple strikes can share a single 24V AC circuit via parallel wiring, reducing hardware cost.
$79.00 $59.99 Save $19.01The item has been added -
Geovision
SKU: GV-EL124S
Geovision GV-EL124S Electric Strike
Fail-secure electric strike for access control door locking
- Fail-secure design keeps door locked during any power loss event.
- Compact 7×2×2 in form factor fits standard door frame strike locations.
- 3-year warranty supports long-term deployment in high-traffic environments.
$80.00 $59.99 Save $20.01The item has been added -
Geovision
SKU: GV-EL124S-81
Geovision GV-EL124S GV-EL124S Electric Strike Fail-Secure
Fail-secure electric strike, 12V DC, stays locked on power loss
- Fail-secure design keeps door locked on power loss, no battery backup required.
- Runs on 12V DC for direct integration with standard commercial access control panels.
- 3-year warranty supports deployment in high-traffic institutional and commercial entrances.
$62.99 $61.99 Save $1.00The item has been added -
Geovision
SKU: 81-ML1K2DS-0001
Geovision GV-ML1200 Electromagnetic Lock 1200LB - 81-ML1K2DS-0001
- 1200 lb holding force secures high-traffic commercial entry points reliably.
- No moving parts eliminate mechanical wear, reducing long-term maintenance overhead.
- Operates at 12VDC, integrating with relay-based panels and third-party controllers.
$190.00 $146.99 Save $43.01The item has been added
Door Hardware & I/O
Door hardware and I/O components connect physical doors to your access control system. From electric strikes and magnetic locks to exit devices and relay modules, proper hardware selection ensures safe, compliant, and reliable operation.
Plan Your Deployment
- Fail-safe vs fail-secure lock configuration
- Door type (wood, metal, glass, storefront)
- Request-to-exit (REX) device requirements
- Power supply and voltage compatibility
- Local life-safety and fire code compliance
Door Hardware & I/O — Engineering-Grade Door Hardware for Commercial Deployments
This category covers 532 working models of door hardware & i/o sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Fail-safe versus fail-secure determines what happens during power loss. Fail-safe locks unlock on power loss (used on egress doors where life safety dominates); fail-secure locks remain locked (used on storage, server rooms, and exterior doors where security dominates). Code typically mandates fail-safe on stairwell and egress doors. Confirm with the AHJ before specifying — misapplied lock mode is a common code violation.
Strike, mortise, magnetic lock, and electrified panic hardware each have distinct installation, current draw, and code implications. Electric strikes work with most mechanical locksets and are easiest to retrofit. Magnetic locks (maglocks) provide high holding force on glass and wood doors but require dedicated REX and panic-bar interfaces for egress compliance. Verify the door's existing prep before choosing.
Power draw and inrush current dictate power supply sizing. A 5-door system with 1A peak per lock can exceed an undersized 12VDC supply at simultaneous lock-down events. Account for accessories — REX motion sensors, door-position switches, electrified levers — when sizing the supply and the battery backup required for code compliance.
Tamper switches, door-position monitoring, and request-to-exit sensors generate the audit trail your security team needs. Mechanical contact switches are cheaper; magnetic reed switches resist tampering better. Pair each door with a position switch and a REX sensor at minimum — without door-position monitoring, you can't distinguish 'authorized entry' from 'door held open after authorized entry,' which is a common compliance gap.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 8MP, 2MP |
| IP Rating | IP66, IP67 |
| Connectivity | Wired |
| Power | AC/DC, Battery |
| Type | Accessory, Controller, Cable, Switch, Power Supply, Access Card, Contact, Lock/Strike |
| Night Vision | Yes |
Top Brands in This Category
Frequently Asked Questions
Fail-safe or fail-secure for stairwell doors?
Fail-safe is mandatory on most stairwell doors and other code-designated egress paths — the lock must release on fire alarm or power loss to allow evacuation. Fail-secure on those doors is a code violation. Confirm the local fire code and AHJ requirements; commercial buildings in the U.S. follow NFPA 101 and the International Building Code, both of which detail egress lock behavior in detail.
What current draw should I plan for electrified locks?
Typical 12VDC electric strikes draw 200-500 mA continuous, with inrush spikes of 1-2A at engagement. Magnetic locks rated for 1,200 lbs holding force draw around 500 mA continuous at 24VDC. Power supplies need to handle simultaneous lock-down current — emergency lockdown events activate all locks at once. Size the supply with at least 25% headroom and confirm battery backup runtime requirements.
Do I need a request-to-exit (REX) sensor?
Most code-compliant electrified door installations require a REX sensor to shunt the alarm during authorized egress. Without REX, every egress event registers as a forced-door alarm. PIR motion sensors are the common choice and integrate with the door controller's REX input. Mechanical push-bar REX is also acceptable for hardware that includes that switch natively.
Can I use one lock for both card and mechanical key entry?
Yes — most electrified strikes and locks allow mechanical key override on the same door. Maintaining a master key for emergency mechanical access is required by code in many jurisdictions and recommended in all. Document the master key holders carefully; an uncontrolled master key program undermines the electronic audit trail.
What's the lifespan of a magnetic lock?
Quality maglocks (Securitron M62, HES, von Duprin) typically last 15-20 years with no mechanical wear. Failure points are the connector, the armature plate-to-lock alignment, and contamination of the magnetic face. Plan for armature replacement at year 10 as a hedge against alignment drift. Strike-type locks with mechanical parts last 5-10 years before strike-plate wear becomes a reliability issue.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.